I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-20%
Multimeter Probes KX-111
Original price was: ₹150.00.₹130.00Current price is: ₹130.00. inc. GST
Bluetooth Receiver With Amplifier Board
Original price was: ₹300.00.₹200.00Current price is: ₹200.00. inc. GST
Taparia 3″ Nose Plier
Original price was: ₹200.00.₹160.00Current price is: ₹160.00. inc. GST
Related products
1000-4x HSS Flute Countersink Drill Bit Screw Woodworking Chamfer Home War
- Suitable for all hand and power drills
- Suitable for hardness lower material, such as wood
- 5 Flutes chamfering device Drill bit
- Material: HSS
- Surface treatment: Titanium
- Suitable for all Woods and Soft Metals.
- Four piece set includes bits for drilling location holes for screw sizes 3mm, 4mm, 5mm, 6mm.
- Adjustable counter sleeve depth with wrench.
- Drill and countersink for wood screws without changing bits.
- Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew.
3. 5X / 12X Helping Hand Magnifier with Soldering Stand & LED Light
- Material of lens: Glass
- Lens Diameter: 2.56 inch/65mm
- Color: Black + Silver
- Useful Aid for soldering work or model makers. Ideal when a third hand is needed
- Adjustable crocodile holding clamps
- With two LED lighting, this model can work very well in the dark environment
- The bottom battery compartment is furnished with a steel plate which can enhance stability
- With three pcs of AAA batteries (not included), large capacity, this model can continuously discharge more than 10 hours, expediently be used
- Can also be used when model making, jewelry making, watch repairs and craft work
- Weld holder size: 1.18 x 3.54inch
- Base size: 3.93 x 2.56 x 0.79inch
- Weight: 6g
6pcs Hss Titanium Mane Drill Tap Combination Bit – 1/4 Hex Spiral Screw Tap
- Type: Center Drill Bit
- DIY Supplies: Woodworking
- Material: High Speed Steel
- Use: Wood Drilling,
- Shank: 1/4" (6.35mm) hex shank
- Size: 3.175mm, 3.97mm, 4.76mm, 6.35mm, 7.94mm, 9.53mm.
- Complete Hole Drilling
- Tapping And Deburring/Countersinking In One Operation With Power Drill
- Saves labour cost and time
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
- Input Voltage: 4.5V to 30V DC
- Input Current: <= 20mA
- Display Colour: Red (Voltage), Blue (Current)
- Measuring Voltage Range: 0V to 100V DC
- Measuring Current Range: 0A to 10A
- Measurement Accuracy: 1%
- Minimum Voltage Resolution: 0.1V
- Minimum Current Resolution: 0.01A
- Voltage error: ±0.1%
- Current error: ±1%
- Working temperature: -10℃ to 65℃. Blue
- 28’’ device with 5 wires divided into 2 sets.
- Black, Red are for the power supply and 3 wires to measure the Voltage and Current.
- Dimension: 48mm x 29mm x 22mm
HSS Steel Step Cone Drill Titanium Bit Set Hole Cutter Triangular Shank
- Material: high-speed steel
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- Self-starting point starts on contact
- Titanium reduces heat for longer life
- Anti-skid tip eliminates the need for center punching or pilot hole drilling.
- Applicable scope: woodworking punch
- specification: 3/16 1/2 Size: 3/16 1/2 (3/11/5/13/7/11/2) 1/8 1/2 Size: (1/5/37/31/9/35/111/33/13/37/115/31/2mm) 1/4 3/4 Size: (1/5/13/7/11/9/15/11/13/4)
Mini 0.36 Digital Voltmeter DC 4.7-32V 2 Wires Voltage Panel Meter LED Display – Red
- Measurement range: 4.7V to 30V DC
- Only 2 wires, derives supply from the source
- Operation current: < 30mA
- Display colour: RED
- Measurement Error tolerance: +/- 2 percent
- Distance between mounting holes: 26mm
- Current Consumption: < 15 mA.
- Accuracy: 0.1 V.
- Wire length: 18cm.
- Refresh Speed : Approx. 200mS/time.
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 30mm x 12mm x 8.5mm
Mini Electric Drill Chuck 0.3-4mm Jto Taper-Mounted Lathe PCB Drill Press
- High precision screw thread and tapered hole.
- Strong impact resistance.
- Compatible with impact drill and different power electric drill.
- jt0 taper the biggest end of diameter: 6. 350mm
- jt0 taper the smallest end of diameter: 5. 800mm
- Outer diameter: 21. 5mm
- Drill Clip aperture: 6mm
- Taper type outside diameter drill chuck: 21mm
- Clamping range: 0. 3mm-4mm drill,
- Maximum clamping: 4.2mm
- Fit motor shaft diameter 3. 17mm
- Connection size: jt0 (inner hole diameter is 6 mm) for milling machine, lathe, drilling machine, woodworking machine
Reviews
There are no reviews yet.