I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-13%
Pedal Throttle for Electric Scooter/Bike/Tricycle Accelerator Foot Pedal - Type 2
Original price was: ₹1,500.00.₹1,200.00Current price is: ₹1,200.00. inc. GST
250W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit - Basic
Original price was: ₹13,500.00.₹12,000.00Current price is: ₹12,000.00. inc. GST
TDA7498 High Power Digital Amplifier Board 2*100W DC 14-34V Audio Stereo Amplifier Board
Original price was: ₹1,500.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
- High power class d digital amplifier.
- Two-channel stereo, 2x100w power output.
- Material: Metal
- 100 W + 100 W output power at THD = 10% with RL = 6 Ω and VCC = 36 V
- Wide-range single-supply operation (14 – 39 V)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB
- Applicable speaker impedance: 4/6/8 ohm(8 ohm is the best).
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection
- Thermal overload protection
- Externally synchronizable
- size: 110*70*10mm
Description
TDA7498 High Power Dual Channel Stereo Audio Amplifier is a 14-36 power supply On-board TDA7498 stereo audio amplifier chip. TDA7498 digital amplifier board module based on dual BTL class-D audio amplifier with a single power supply module designed specifically for home systems and active speaker applications. It is a linear circuit with a dual-channel, capable of 100w+0W power output, and generates a peak output current of 8A. Thus Dual Channel Stereo Audio Amplifier board module offers very low harmonic distortion and better sound quality. And it can drive 4/6/8 ohm speakers.
It supports Wide-range single-supply operation of 14V – 30 V providing an efficiency of 90%. TDA7498 digital amplifier board module has 5 control buttons. These control buttons are used to change the track or control the volume. Meanwhile, the DIP 2 switches button functions as combining the up/down position of each switch you can obtain 4 different filters for the output. TDA7498 High output power digital amplifier features reverse polarity protection. When the heat sink temperature rises to a certain value, the cooling fan will work. It comes in a 36-pin Power SSO package with an exposed pad up (EPU) to facilitate mounting a separate heatsink.
This amplifier allows the selection of four fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB settings via DIP switch selection. The Parallel BTL function in the amplifier performed using the MODE pin. It also has a power indicator to identify the power state of the module. Moreover, it features a thermal overload protection system and features both system shutdown and mute control function.
Reviews (0)
Shipping & Delivery
Related products
LM1876 Dual 20W Audio Power Amplifier IC
- Dual 20W Audio Power Amplifier with Mute and Standby Modes
- Spike Protection
- Minimal amount of external components necessary
- Quiet fade-in/out mute mode
- Standby-mode
- Isolated 15-lead TO-220 package
- THD+N at 1 kHz at 2 x 15W continuous average output power into 4Ω or 8Ω: 0.1% (max)
- THD+N at 1 kHz at continuous average output power of 2 x 20W into 8Ω: 0.009% (typ.)
- Standby current: 4.2 mA (typ.)
MT8870 DTMF Audio/Speech Decoding Telephone Module
- Power Input: 5V Nominal (4.5V - 5.5V)
- 5 Channel Interface
- Detects 0-9, A-D, *, #
- 54” Pin pitch
- On-board 3.5mm jack input Facility
- On-board MT8870 frequency decoder chip
- On-board voice input interface
- On-board LED lights for output state indication
- Low power consumption
- Internal gain setting amplifier
- Adjustable guard time
- 5 Channel interface
- Power-down mode
- Inhibit mode
- Does not require external circuits or wiring,
- Dimension: 37 x 25 x 12 mm
PAM8403 DIGITAL AMPLIFIER BOARD
- 3W output at 10% THD with a 4ohm load & 5V power supply
- Output power: 3W
- Supply voltage: 2.5V-5.5V
- Low THD+N
- Superior low noise
- efficiency up to 96%
- Thermal shutdown
- Low quiescent current and low EMI
- Few external components to save space & cost
- High fidelity sound output 3W + 3W, is a rare good product
- High amplification efficiency of 85%
- Unique without LC filter class D digital power board
- Can use computer USB supply directly
- High life expectancy up to 15 years
- Dimension:24*15mm
TDA7266 Dual Audio Channel 7W + 7W Amplifier Module
- Operating Voltage Range: 3 V to 18 V
- Power supply:14W
- On-board TDA7266 stereo audio amplifier chip
- Output: dual-channel 7W + 7W
- On-board 5.08 mm terminal blocks for the left and right audio channels
- On-board potentiometer for volume adjustment
- DC power jack
- Minimum external components
- On board TDA7266 audio power amplifier chip, double track 7W + 7W, suitable for 4-8 Euro, 5-15W speakers.
- The main pin has led chip, convenient external device control, onboard 2 road 5.08 (mm) distance between two p terminal, around a track connection output respectively.
- The on-board dial potentiometer, output size can adjust the volume.
- Support in DC, terminal blocks, row needles 3 power input mode, the default for the DC,
- Standby and mute functions
- Short-circuit protection
- Thermal overload protection
- Dimension:45mm * 33mm * 30mm
- Weight:7g
TDA7498E Double 160W Power Amplifier Dual Channel Stereo Audio Amplifier Module Support BTL Mode
- Amplifier chip: TDA7498E
- Working voltage: DC 15-36V (Recommend 32V, 8A, if power is too small will appear distortion and so on.)
- Output power: 2 x 160W
- Number of channels: Two-channel Stereo
- Efficiency: 85%
- Applicable speaker impedance: 4/6/8ohm (8ohm is the best).
- 160-W + 160-W output power at THD = 10% with RL = 4 Ω and VCC = 36 V
- 1 x 220 W output power mono parallel BTL at THD = 10% with RL = 3 Ω and VCC = 36 V
- Wide-range single-supply operation (14 - 36 V)
- High efficiency (η = 85%)
- Parallel BTL function using the MODE pin
- Four selectable, fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB and 35.8 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Smart protection
- Thermal overload protection
- Small offset less than 20 mV
- PCB board size: 108 x 78mm
- Weight: 172g(approx.)
Reviews
There are no reviews yet.