I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-10%
Leadshine DMA860H
Original price was: ₹8,600.00.₹8,500.00Current price is: ₹8,500.00. inc. GST
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Original price was: ₹1,200.00.₹970.00Current price is: ₹970.00. inc. GST
MACH3 interface board
Original price was: ₹1,500.00.₹1,350.00Current price is: ₹1,350.00. inc. GST
- Compatible Stepper Motor Driver – Max 5 2-phase Microstep controllers
- Driver type – Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight – Approx. 75g
- Dimensions – 90 * 70 * 20mm
Description
MACH3 Interface Board CNC 5 Axis with Optocoupler is the latest upgraded 5 axis breakout board. This is designed explicitly for the CNC single-axis 2-phase stepper driver controller, such as TB6560, M542, M542H, MA860H, 2M542, 2M982, DM542(A), DM860(A), etc. single-axis stepper driver controller series. Using this 5 axis breakout board, any 1-5 single-axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.
All the way through the optocoupler isolated 0-10V analogue voltage output can be controlled with the corresponding analogue interface converter to control the spindle speed. The Output port P1 port Opens all 17 ports that can be directly accessed with the optocoupler drive, thus the 5-axis stepper motor can be controlled. P1 as PWM outputs controlled with optocoupler input spindle governor. This can access by a common cathode or common anode input level to a 5V drive. Moreover, all the signals in this interface board are optoisolated which protects your computer security.
Reviews (0)
Shipping & Delivery
Related products
12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers
- Material: stainless steel,
- Core: ceramic.
- Voltage: 12V.
- Power: 40W.
- Diameter: 6mm, Heating Length: 20 mm.
- Wire Length: 100 cm.
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
Black PLA 1.75 mm 1 Kg Filament For 3D Printer Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
Creality 3D Ender-3 V-slot Prusa I3 DIY 3D Printer Kit 220x220x250mm Printing Size With Power Resume Function/MK10 Extruder 1.75mm 0.4mm Nozzle
- Modeling Technology - FDM（Fused Deposition Modeling).
- Printing Size - 220*220*250mm.
- Machine Size - 440*410*465mm.
- Net Weight - 8KG.
- Printing Speed - 180mm/s.
- Filament - 1.75mmPLA, TPU, ABS.
- Power Supply - 100-265V 50-60HZ.
- Output - 24V 15A 360W.
- Layer Thickness - 0.1-0.4mm.
- Nozzle Diameter - 0.4mm.
- Printing Accuracy : ±0.1mm.
- File Format - STL,OBJ,G-code.
- Working Mode - Online or SD offline.
- Nozzle Temperature - 255℃.
- Hot bed Temperature - 110℃. "
NEMA 23 18.9 kg-cm
- Step Angle : 1.8 °
- Holding Torque : 18.9 kg-cm
- Operating Voltage : 3.2 Volts
- Supply Current (A)Â : 2.8 A/Phase
- No. of Leads : 4
- Inductance: 3.6 mH/Phase
- Resistance : 1.13 O/Phase
- Rotor Inertia : 480 gm-cm2
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm)Â : 6.35
- Shaft Length (mm)Â : 20.6
- Cable Length: 30 CM
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Reviews
There are no reviews yet.