I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-10%
Leadshine DMA860H
Original price was: ₹8,600.00.₹8,500.00Current price is: ₹8,500.00. inc. GST
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Original price was: ₹1,200.00.₹970.00Current price is: ₹970.00. inc. GST
MACH3 interface board
Original price was: ₹1,500.00.₹1,350.00Current price is: ₹1,350.00. inc. GST
- Compatible Stepper Motor Driver – Max 5 2-phase Microstep controllers
- Driver type – Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight – Approx. 75g
- Dimensions – 90 * 70 * 20mm
Description
MACH3 Interface Board CNC 5 Axis with Optocoupler is the latest upgraded 5 axis breakout board. This is designed explicitly for the CNC single-axis 2-phase stepper driver controller, such as TB6560, M542, M542H, MA860H, 2M542, 2M982, DM542(A), DM860(A), etc. single-axis stepper driver controller series. Using this 5 axis breakout board, any 1-5 single-axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.
All the way through the optocoupler isolated 0-10V analogue voltage output can be controlled with the corresponding analogue interface converter to control the spindle speed. The Output port P1 port Opens all 17 ports that can be directly accessed with the optocoupler drive, thus the 5-axis stepper motor can be controlled. P1 as PWM outputs controlled with optocoupler input spindle governor. This can access by a common cathode or common anode input level to a 5V drive. Moreover, all the signals in this interface board are optoisolated which protects your computer security.
Reviews (0)
Shipping & Delivery
Related products
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
Arduino CNC Shield v3 Engraving Machine/3D Printer/A4988 driver GRBL compatible
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin Molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
Creality 3D Ender-5 DIY 3D Printer Kit 220*220*300mm Printing Size
- Moulding Technology: FDM.
- Print Dimensions: 220*220*300mm.
- Print Speed: <180mm/s, Normal Printing Speed 40-80 mm/s.
- Print Accuracy: + - 0.1mm.
- Layers Thickness: 0.1-0.4mm.
- Nozzle Diameter: Standard 0.4mm. Convertible 0.2, 0.3mm.
- Nozzle Quantity: 1.
- Nozzle Temperature: <260 Degree C
- Hot Bed Temperature: <135 Degree C
- Working Modes: Online or TF Cards are printed offline.
- File Formats: STL, ODJ, AMF.
- Slicing Software: Cura, Repeti-Host, Simlify 3d.
- Power Parameters: Input:110v/220v. 50/60Hz. Output: DC 24V.
- Machine Power: 270W.
- Printing Materials: PLA, ABS, Soft Glue, Wooden, Copper Containing, Gradient, etc.
- Consumables Diameter: 1.75mm.
- Heating upto 100 deg C in 5 mins,
- Printing with High precision,
- Resume Printing after power-off,
- Soft Magnetic Stickers - Instead of traditional beauty paper & glue, easy to mold, model adhesion is good.
- Built-in Power Supply - 350w high-quality power supply, easy to achieve long time stable printing.
- Dual Y-Axis - synchronization, small moving quality, flexible & reliable.
- Down Shift Z-Axis - for smoother movement.
- Descartes Design - Down Shift Z-axis for smoother movement.
Creality Children CR-100 3D Printer 100*100*80mm Printing Size 1.75mm 0.4mm Nozzle Support
- Brand: CREALITY 3D
- Model: CR-100
- Technology: FDM
- Type: Material extrusion
- Printing Size: 100*100*80mm.
- Machine Size: 241*183*255mm.
- Package Size: 250*230*340mm.
- N.W: 2.8Kg.
- G.W: 3.9Kg.
- Colour : Red
- Printing Method: FDM.
- Number of Nozzle: 1pcs.
- Slice Thickness: 0.1mm-0.4mm.
- Filament Diameter: 1.75mm.
- Working Mode: Online or SD card offline.
- File Format: STL, obj, amf.
- Nozzle Diameter: Standard 0.4mm.
- Plug: Default EU Plug from CN Warehouse.
- Rated Power: 50W.
- Power Supply Input: AC 100-240V /Output: DC 12V.
- Slice Software Cura/Repetier-Host/Simplify 3D.
GT2 Open Timing Belt for 3D Printer and CNC
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
- Current / Phase: 1.5A
- Step Angle(degrees): 1.8
- Phase: 2
- Type: Hybrid
- Certification: ROHS,CE
- Holding Torque: 4.2 KGCM
- Step angle accuracy: + - 5%(full step, not load)
- Resistance accuracy: + - 10%
- Inductance accuracy: + - 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature: -20deg ~+50deg
- Insulation resistance:100M Min,500VDC
- Insulation Strength: 500VAC for one minute
- (Lead Screw)
- Lead Screw Material: 304 Stainless Steel
- Color: Sliver
- Diameter: 8mm
- Length: 300mm
- Lead of thread: 8mm.
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Reviews
There are no reviews yet.