I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-33%
74LS107 Dual J-K Flip-Flop IC
Original price was: ₹30.00.₹25.00Current price is: ₹25.00. inc. GST
74LS112 Dual J-K Negative Edge Triggered Flip-Flop IC
Original price was: ₹20.00.₹15.00Current price is: ₹15.00. inc. GST
CD4007 Dual Complementary Pair Plus Inverter IC
Original price was: ₹30.00.₹20.00Current price is: ₹20.00. inc. GST
- Dual Complementary  Pair Plus Inverter
- DC Supply Voltage Range: −0.5 to +18.0 V
- Input or Output Voltage Range: −0.5 to VDD +0.5 V
- Input or Output Current: ±10 mA
- Power Dissipation: 500 mW
- Low level Output Voltage Max.: 0.05V
- High level Output Voltage: 5.0V
- Low level Input Voltage: 2.25V
- High level Input Voltage: 2.75V
- Propagation Delay Time Max.: 125ns
- Package: DIP-14
Description
The CD4007C designed of three complementary pairs of Nand P-channel enhancement mode MOS transistors. This dual complementary pair transistor is suitable for series/shunt applications. The transistor elements made accessible through the package terminals, As a result, provides a convenient means for constructing the various typical circuits. All inputs protected from static discharge by diode clamps to VDD and VSS. Hence for proper operation, the voltages at all pins must be constrained to be between VSS − 0.3V and VDD + 0.3V at all times.
More complex functions are possible using multiple packages. The CD4007 types manufactured in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), also 14-lead thin shrink small-outline packages (PW and PWR suffixes).
Applications:
- Extremely high-input impedance amplifiers
- Shapers
- Used in inverting operation
- Threshold detector
- Linear amplifiers
- Crystal oscillators
Reviews (0)
Shipping & Delivery
Related products
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash
Reviews
There are no reviews yet.