I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
78L08 8V Positive Voltage Regulator IC
₹18.00 inc. GST
74LS253 Dual 4-Line to 1-Line Data Selector Multiplexer IC
₹35.00 Original price was: ₹35.00.₹25.00Current price is: ₹25.00. inc. GST
74LS257 Quadruple 2-Line to 1-Line Data Selector or Multiplexer IC
₹24.00 Original price was: ₹24.00.₹15.00Current price is: ₹15.00. inc. GST
- Quadruple 2-Line to 1-Line Data Selector/Multiplexer
- Logic Family:Â LS
- No. of Bits:Â 4
- Propagation Delay Time:Â 15 ns at 5 V
- No. of Lines In/Out:Â 2 / 1
- Output Current Max:Â 24mA
- Power Dissipation:Â 200 mW
- No. of Channels:Â 1
- No. of Pins:Â 16
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range:Â 4.75V to 5.25V
- Package:Â DIP-16
Description
The 74LS257 Quadruple 2-Line to 1-Line Data Selector are quad 2-Input Multiplexers with 3-state outputs. A Common Data Select input selects four bits of data from two sources. The selected data is presented in true (non-inverted) form in the four outputs. With a HIGH on the common Output Enable (E O) Input, the outputs convert to a high impedance condition. As a result, the outputs can communicate directly with bus-oriented systems. Meanwhile, these integrated circuits were created using the Schottky barrier diode technique for high speed and are fully compatible with all ON Semiconductor TTL families.
In bus-organized systems, the 74LS257 is used to multiplex signals from 4-bit data sources to 4-output data lines. When the output-enable (OE) input is set to a high logic level, the 3-state outputs do not load the data lines. The SN54ALS257A is designed to operate in the complete military temperature range of 55 to 125 degrees Celsius.
A multiplexer (or mux) is also known as a data selector in electronics. A multiplexer is an electronic device that accepts two or more inputs. Based on the Select line status, one of them is provided as the output. Multiplexers are also utilised to implement multiple-variable Boolean functions.
Reviews (0)
Be the first to review “74LS257 Quadruple 2-Line to 1-Line Data Selector or Multiplexer IC” Cancel reply
Shipping & Delivery

Related products
AP Extension pigtail SMA female socket jack to UFL IPX Connector
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
GSM Antenna
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
Solid State Relay Module SSR-25DA 25A /250V 3-32V DC Input 24-380VAC Output
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 25A.
- Working voltage: 250V.
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Dimension: 6. 5Cm x 4. 5Cm x 2. 2Cm
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash

Reviews
There are no reviews yet.