I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-38%
78L08 8V Positive Voltage Regulator IC
₹18.00 inc. GST
74LS253 Dual 4-Line to 1-Line Data Selector Multiplexer IC
Original price was: ₹35.00.₹25.00Current price is: ₹25.00. inc. GST
74LS257 Quadruple 2-Line to 1-Line Data Selector or Multiplexer IC
Original price was: ₹24.00.₹15.00Current price is: ₹15.00. inc. GST
- Quadruple 2-Line to 1-Line Data Selector/Multiplexer
- Logic Family:Â LS
- No. of Bits:Â 4
- Propagation Delay Time:Â 15 ns at 5 V
- No. of Lines In/Out:Â 2 / 1
- Output Current Max:Â 24mA
- Power Dissipation:Â 200 mW
- No. of Channels:Â 1
- No. of Pins:Â 16
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range:Â 4.75V to 5.25V
- Package:Â DIP-16
Description
The 74LS257 Quadruple 2-Line to 1-Line Data Selector are quad 2-Input Multiplexers with 3-state outputs. A Common Data Select input selects four bits of data from two sources. The selected data is presented in true (non-inverted) form in the four outputs. With a HIGH on the common Output Enable (E O) Input, the outputs convert to a high impedance condition. As a result, the outputs can communicate directly with bus-oriented systems. Meanwhile, these integrated circuits were created using the Schottky barrier diode technique for high speed and are fully compatible with all ON Semiconductor TTL families.
In bus-organized systems, the 74LS257 is used to multiplex signals from 4-bit data sources to 4-output data lines. When the output-enable (OE) input is set to a high logic level, the 3-state outputs do not load the data lines. The SN54ALS257A is designed to operate in the complete military temperature range of 55 to 125 degrees Celsius.
A multiplexer (or mux) is also known as a data selector in electronics. A multiplexer is an electronic device that accepts two or more inputs. Based on the Select line status, one of them is provided as the output. Multiplexers are also utilised to implement multiple-variable Boolean functions.
Reviews (0)
Shipping & Delivery
Related products
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.