I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
“IR LED Sensor” has been added to your cart. View cart
78L08 8V Positive Voltage Regulator IC
₹18.00 inc. GST
74LS253 Dual 4-Line to 1-Line Data Selector Multiplexer IC
₹35.00 Original price was: ₹35.00.₹25.00Current price is: ₹25.00. inc. GST
74LS257 Quadruple 2-Line to 1-Line Data Selector or Multiplexer IC
₹24.00 Original price was: ₹24.00.₹15.00Current price is: ₹15.00. inc. GST
- Quadruple 2-Line to 1-Line Data Selector/Multiplexer
- Logic Family:Â LS
- No. of Bits:Â 4
- Propagation Delay Time:Â 15 ns at 5 V
- No. of Lines In/Out:Â 2 / 1
- Output Current Max:Â 24mA
- Power Dissipation:Â 200 mW
- No. of Channels:Â 1
- No. of Pins:Â 16
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range:Â 4.75V to 5.25V
- Package:Â DIP-16
Description
The 74LS257 Quadruple 2-Line to 1-Line Data Selector are quad 2-Input Multiplexers with 3-state outputs. A Common Data Select input selects four bits of data from two sources. The selected data is presented in true (non-inverted) form in the four outputs. With a HIGH on the common Output Enable (E O) Input, the outputs convert to a high impedance condition. As a result, the outputs can communicate directly with bus-oriented systems. Meanwhile, these integrated circuits were created using the Schottky barrier diode technique for high speed and are fully compatible with all ON Semiconductor TTL families.
In bus-organized systems, the 74LS257 is used to multiplex signals from 4-bit data sources to 4-output data lines. When the output-enable (OE) input is set to a high logic level, the 3-state outputs do not load the data lines. The SN54ALS257A is designed to operate in the complete military temperature range of 55 to 125 degrees Celsius.
A multiplexer (or mux) is also known as a data selector in electronics. A multiplexer is an electronic device that accepts two or more inputs. Based on the Select line status, one of them is provided as the output. Multiplexers are also utilised to implement multiple-variable Boolean functions.
Reviews (0)
Be the first to review “74LS257 Quadruple 2-Line to 1-Line Data Selector or Multiplexer IC” Cancel reply
Shipping & Delivery

Related products
4 Pin RMC Connector
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash

Reviews
There are no reviews yet.