I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
4N80 N-Channel Mosfet Transistor 800V 4A
₹55.00 Original price was: ₹55.00.₹50.00Current price is: ₹50.00. inc. GST
- Designator: 4N80
- Type of Transistor: MOSFET
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 106 W
- Maximum Drain-Source Voltage |Vds|: 800 V
- Maximum Gate-Source Voltage |Vgs|: 30 V
- Maximum Drain Current |Id|: 4 A
- Maximum Junction Temperature (Tj): 150 °C
- Rise Time (tr): 45 nS
- Drain-Source Capacitance (Cd): 75 pF
- Maximum Drain-Source On-State Resistance (Rds): 2.3 Ohm
- Package: TO-220
These 4N80 N-Channel enhancement mode power field-effect transistors designed based on Silicon N Channel MOS Type. 4N80 is simply a three-terminal silicon device with, high voltage and high current power MOSFET, designed to have better characteristics, such as fast switching time. This advanced technology specially tailored to reduce minimize on-state resistance while providing high rugged avalanche characteristics, reliable, and fast switching performance. These devices are compatible for speed switching applications in power supplies, PWM motor controls, high efficient DC to DC converters and bridge circuits based n half-bridge topology. Moreover, 4N80 feature minimum Lot-to-Lot variations for robust device performance and reliable operation.
4N80 N-Channel Mosfet Transistor manufactured in TO-220F package that is universally accepted for all commercial-industrial applications. 4N80 provides a Drain Source Voltage of 800V at a drain current 4A. These MOSFET Transistors designed explicitly to achieve extremely low on-resistance per silicon area and lower gate charge performance. This feature makes this device ideal for use as a primary switch in advanced high-efficiency isolated DC-DC converters.
A MOSFET designed as a special type of metal–oxide–semiconductor field-effect transistor (MOSFET) explicitly to handle significant power levels. This N-Channel MOSFET defined as a type of MOSFET made up of a majority of electrons as current carriers. When the MOSFET activated and is on, the majority of the current flowing are electrons moving through the channel. It is one of the prominent power semiconductor device in world, due to its low gate drive power, wide bandwidth. This makes it ideal for use in wide range of applications such as in low-voltage (less than 200V) switch.

Related products
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
5 Pin RMC Connector
AP Extension pigtail SMA female socket jack to UFL IPX Connector
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
GSM Antenna
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board

Reviews
There are no reviews yet.