K150 PIC ICSP programmer
KA2284 Audio level Indicator
- Chip: KA2284.
- Wide operating supply voltage: 3.5V-16V
- `Level amplitude can be adjusted.
- AC/DC signal can be controlled through the jump line.
- High gain rectifying amplifier included(Gv=26dB)
- Low radiation noise when LED turns on
- Logarithmic indicator for 5-dot LED of bar type.
- Constant current output( 15mA)
- Minimum number of external parts required
- PCB board size: 29 x 21 mm
KA3524 Voltage Mode PWM Control Circuit IC
- Voltage Mode PWM Control Circuit with 200mA Output Drivers
- Output Current (Each Output): 200mA
- Reference Output Current: 50mA
- Oscillator Charging Current: 5mA
- Power Dissipation: 1000mW
- Turn-on Threshold Voltage: 7.5V
- Turn-on Current: 2.5mA
- Output Voltage: 5V
- Maximum Oscillator Frequency: 500KHz
- Line Regulation: 10mV
- Load Regulation: 20mA
- Collector Emitter Voltage: 80V
- Package: Dip-16
KA3525 SMPS Controller IC
Kapton Polyimide Heat Resistant/High Temperature/Thermal Tape/SublimationTape 12mm
- Color: Tawny
- Substrate material: Polyimide polymers film
- Glue Type: Silicone
- Substrate material thickness: 0.025mm
- Thickness with adhesive: 0.05mm
- Heat resistance: about 280°C
- Size:1/2" x 100ft (13mm*30m)
- Elongation: 35 %
- Temperature Range:-73°C – 260°C (-99°F - 500°F)
- High insulation, high temperature resistance, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance, without rest on surface when tear.
- Ideal for protecting sensitive printed circuit board (PCB) components,great for sublimation, HTV, heat press and heat transfer.
- Also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.
KBPC2510 Bridge Rectifier 25A 1000V
- Maximum Recurrent Peak Reverse Voltage Vrrm : 1000V
- Maximum RMS Voltage Vrms:Â 700V
- Maximum DC blocking Voltage Vdc:Â 1000V
- High current capability
- High Efficiency
- Low Power Loss
- Low reverse leakage current
- Electrically isolated Metal case for Maximum Heat Dissipation
- High case dielectric strengthPeak Reverse Volatge - 50V to 1000V
- Case to Terminal Isolation Volatge - 2500V
- Diffused Junction
KBPC3510 Bridge Rectifier 35A 1000V
- Maximum peak recurrent reverse voltage: 1000V
- Maximum RMS bridge input voltage: 700V
- Maximum DC blocking voltage: 1000V
- Maximum forward rectified output current: 35V
- Peak forward surge current 8.3 ms half sine-wave superimposed on rated load: 400A
- Maximum forward voltage drop: 1.1V (per elements at 17.5A DC)
- Maximum DC reverse current at rated DC blocking voltage per elements: 10µA
- Rating for fusing (I2T, t<8.3ms): 664 A2sec
- Operating temperature: -55℃ to 150℃
- High current capability
- Surge overload rating: 400A peak
- High Efficiency
- Low Power Loss
- Low reverse leakage current
- Electrically isolated Metal case for Maximum Heat Dissipation
- High case dielectric strength
KBPC5010 Bridge Rectifier 50A 1000V
- Maximum recurrent peak reverse voltage: 1000V
- Maximum RMS voltage: 700V
- Maximum DC blocking voltage: 1000V
- Maximum forward voltage per diode: 1.1V
- Maximum average forward current: 50A
- Peak forward surge current (single half sine-wave): 400A
- Maximum DC reverse current
- At 25℃: 10µA
- At 125℃: 500A
- Operating temperature range: -40℃ to +150℃
- High current capability
- Â Surge overload ratings : 400 Amperes
- High Efficiency
- Low Power Loss
- Low reverse leakage current
- Electrically isolated Metal case for Maximum Heat Dissipation
- High case dielectric strength
KCD4 Rocker Switch
KFL08 Zinc Alloy Pillow Block Flange Bearing 8mm Inner Diameter Flange Bearing
- Model Number: KFL08
- Material: Zinc Alloy
- Inner diameter: 8mm
- Length: 48mm
- Height: 12mm
- It inserts in housing work as a unit bearing.
- Housing is mainly casting or pressed steel.
- Bearing units are compact in design with perfect sealing devices.
- Light weight and high finish as it is made from Zinc Alloy.
- Anti-corrosive properties due to the high quality alloy material.
- Very stable even at high speeds of rotation.
- Low Noise generation even at higher speeds.
- Highly durable and long life in industrial working conditions.
- The bearing is closed on both sides to prevent dust and contamination.
- Weight: 26.4g
KK-Mini FLIGHT CONTROLLER
- IC:Â Atmega644 PA
- Gyro/Accelerometer: Auto-level:Â Yes
- Input Voltage:Â 4.8-6.0V
- AVR interface: standard 6 pins.
- The signal from Receiver: 1520us (5 channels)
- Signal to ESC: 1520us
- LCD size: 24*18mm
- Mini buttons size: Four 3.3*4.2mm
- Mounting holes: 30.5x30.5mm
- Voltage sensor:Â One red positive pin header for.
- Input rail:Â Single row 2.54mm pitch pin header for input signal
- Firmware Version: 1.6
- Dimension: 36x36x11.5mm
