Bluetooth TTL HC05 HC06 Compatible Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 4GHz ISM band
- Profiles: Bluetooth serial port TTL out
- Sensitivity: ≤-84dBm at 0.1% BER
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Security: Authentication and encryption
- Working temperature: -20 ~ +75 Centigrade
- Power supply: +3.3V-5V DC 50mA
- Profiles: Bluetooth serial port
- 3 mm screw drive hole, easy to mount it on somewhere
- UART interface with programmable baud rate
- Push switch for issuing AT command
- VCC GND OUT uses 2.54mm standard pins to ease the connections.
- 2 No LED for Communication and Status
- With integrated antenna
- With edge connector
TEA5767 FM Stereo Radio Module
- Directly plug antenna interface.
- I2C bus communication.
- Multi-capacitor combined filter.
- Blue LED power indicator.
- High sensitivity(low noise RF input amplifier).
- High power auto gains control AGC circuit.
- With reverse polarity protection diode.
- With a power output filtering sensor.
- Blue LED power indicator.
- Onboard 3.5mm audio interface.
- If connects with a single chip, only connect the Power Ground and two I2C communication cables.
- LC harmonic oscillator uses a low-cost fixed chip.
- No need to adjust the Intermediate frequency.
- High sensitivity(low noise RF input amplifier).
- High power auto gains control AGC circuit.
- Soft Mute.3.5mm jack for external Antenna.
Mini Portable Virtual Laser Projection Keyboard and Mouse Wireless Bluetooth
- Compatible with Android, iOS, Windows and Mac all kinds of operation systems that can be used with any phone, tablet, PC and laptop for a smooth and fast way of text input.
- Built-in Bluetooth for connecting to other devices without complex wired troubles
- More stable and smarter
- Can change the mini USB port to micro USB port.
- With mini Bluetooth speakers, which support voice reporting and music playing
- 3 in 1 Function: Laser keyboard,Mouse and bluetooth speaker
- Good touch sensitivity
- The BEEP sound and brightness can be adjusted on the laser keyboard
Leap Motion Controller
- Power supply: 5V DC via USB connector (minimum 0.5A)
- Data connection: USB 2.0
- Interaction zone: Depth of up to 60cm (24”) preferred, up to 80cm (31”) maximum;
- 140×120° typical field of view.
- 3 LEDs spaced on either side and between the cameras, baffled to prevent overlaps.
- Construction: Aluminium and scratch-resistant glass
- Operating temperature: 32º to 113º F (0º to 45ºC)
- Storage temperature: 14º to 122º F (-10º to 50º C)
- Relative Humidity: 5% to 85% (non-condensing)
- Two 640x240-pixel near-infrared cameras; spaced 40 millimetres apart infrared-transparent window, operate in the 850 nanometre +/-25 spectral range; typically operates at 120Hz; capable of image capture within 1/2000th of a second.
- Highly accurate hand and finger tracking with near-zero latency
- 135° field of view extending above the device
- Orion SDK compatible with Windows 7 or newer
- Updated V4 tracking
OpAmp Breakout – LMV358
Single Beam 15 m Photoelectric Active Infrared Intrude Detector IR Sensor Tamper Alarm
- Working Voltage: 12V, 24V
- Working Current: 50MA
- Infrared Frequency: 1.92khz
- Wavelength:940nm
- With rain-proof design
- Operating temperature: --20 degrees to 50degrees
- Relay output : 1 a max *36 v
- Response time(Relay output) <10 ms,
- Hold time(Relay output) 300ms
- Range can be reduced to 30% in bad weather conditions: for rain , dust , etc
- Unique digital filter circuit design, strong anti false alarm ability
- With high levels of anti-RFI/EMI capability
- Fully sealed design, rain-proof(fog),dust-proof(worm),suitable for hostile environment
- Used with kinds of alarm panel and access control system.
- Detector Range: indoor 20m. Outdoor 10m, Detection mode Presence(beam interruption)
- Size : 49.2 x 76 x 21.6MM,
DHT21 AM2301 Digital Temperature Humidity Sensor module SHT11 SHT15 Arduino
- Power: DC 3.3-5.2V
- Humidity: 0~99.9% RH
- Temperature: -20 ~ 60℃
- Precision: ±3% RH, ±0.5 ℃
- Output: Digital (1 wire)
- Accurate, durable and high quality
- 4 pin package
- Ultra-low power
- No additional components
- Excellent long-term stability
- All calibration, digital output
- Completely interchangeable
- Long distance signal transmission
- Relative humidity and temperature measurement
- Dimension: 60 x 27 x 14mm
Water Proof RTD PT100 Temperature Sensor, Stainless Steel
HR202 Digital Temperature Humidity Sensor
- Working Voltage: 3.3 V-5 V
- Output AO - analog output, DO - digital output
- High-quality HR202 humidity sensor
- Comparator output signal is clean, good waveform, driving ability, more than 15mA
- Adjust the temperature distribution position detection threshold
- The output form: DO digital switching outputs ( 0 and 1 ) and AO analog voltage output
- A fixed bolt holes for easy installation
- Using a wide voltage LM393 comparator
- PCB Board Size: 3.2 cm x 1.4 cm
HCZ-H8-B Humidity Sensor, HCZ Series, 20% to 90% RH, 3 %, Through Hole, No Housing
Metal Detector Sensor
- Low battery indicator
- Multiple Modes
- VCC 9V Battery
- Logic high output with common ground
- Can detect any metal at the range of 1Cm to 3Cm, you can connect a 9V battery to make it handy
- It will not detect coins if it is in the middle of the coil, it may detect if it is close to the coil, It will not detect any type of explosives
- The metal sensor has to supply 12V from controllers and not 12V via adapter
STA 540 Audio Amplifier
- High output power capability
- Minimum external components count:
- Standby function (CMOS compatible)
- No audible pop during standby operations
- Diagnostic facilities:
- Protection