Electric Siren Hooter Alarm
48v 500W BM1418ZXF Brushless Motor
Stepper Motor NEMA 34 46 kg-cm Hybrid Bipolar
- Rated Voltage:4.2V
- Current/ phase: 4A
- Inductance/ phase: 7.3mH
- Resistance/ phase: 0.87ohms
- Holding Torque: 46 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm
- Shaft Length: 32mm
- Shaft Diameter: 12mm
- They are high torque stepper motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing
7” Touch Screen
- 800×480 high resolution.
- Viewable screen size: 155mm x 86mm
- 10 finger capacitive touch
- Supports Raspberry Pi, and the driver is provided (works with custom Raspbian directly).
- Supports BB Black, comes with related images like Angstrom.
- Supports Banana Pi / Banana Pro, which comes with related images like Ubuntu, Raspbian.
- Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
- The Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
- Require the latest version of Raspbian OS to operate correctly
- Not only for mini-PCs, but it can also work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case).
- HDMI interface for displaying, USB interface for touch control.
- Back light control to lower power consumption.
- Screen Dimensions: 194mm x 110mm x 20mm
MY1016ZL 24V 250W Electric Wheelchair PMDC Motor with Electromagnetic Brake
- Model: MY1016ZL.
- Working voltage: 24V.
- Starting Current: 3A.
- Rated Torque: 36Nm.
- Noise: <60DB.
- Wheelchair motor output power: below 1100W.
- Operating speed: un-load 75 rpm or 120rpm;
- Reduction Ratio: 40:1.
- Installation structure: end face.
- Function type: wheelchair.
- Protection form: IP44.
- Insulation class: E.
- Power supply type: DC.
12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
- Motor type: 12-inch brushless toothless hub wheel motor.
- Rated power: 350W.
- Rated voltage: 24V 36V 48V.
- Speed: 20- 35KM / H.
- Speed/RPM: 450RPM.
- Diameter: 275mm.
- Open Size: 140mm.
- Motor Weight: 4.5KG.
- Load Weight: 150 -200KG.
- Brake Compatible： electronic brake, disc brakes.
- Tires: 12X2.125
- Waterproof: IP54.
- Application: electric scooter, folding electric car, ebike, e-motorcycle, bike, front/rear drive.
Pixy2 CMUcam5 Smart Vision Sensor – Object Tracking Camera for Arduino, Raspberry Pi, BeagleBone Black
- Pixy2 detects lines, intersections and small barcodes, intended for line-following robots.
- Improved framerate – 60 frames-per-second.
- Tracking algorithms have been added to colour-based object detection.
- Improved and simplified libraries for Arduino, Raspberry Pi and other controllers
- Integrated light source.
- The small, fast, easy-to-use, low-cost, readily-available vision system
- Learns to detect objects that you teach it
- Connects to Arduino with the included cable. Also works with Raspberry Pi, BeagleBone and similar controllers.
- Supports C/C++ and Python
- Communicates via one of several interfaces: SPI, I2C, UART, USB or analogue/digital output.
- Configuration utility runs on Windows, macOS, and Linux.
- All software/firmware is open-source GNU-licensed.
- Dimensions: 43mm x 39mm x 16mm
- Height of Camera: 4mm / 0.16""
- Weight (no IDC cable, no screws): 10g.
Fluke Multimeter 107
MY1016 250W Motor DIY E Bike Combo Kit
- Electric Bicycle permanent Magnet DC Motor MY1016.
- Rated Operating Voltage: 24VDC
- Rated speed: 2650 RPM
- Rated Current: 13.7A
- Current without load: 0.7 – 1.4 A
- Rated Torque: 8.87 Kgcm
- Rated Output Power: 250W
- Transmission :chain sprocket (11 teeth, pitch 1/4"=6,35 mm)
- Nut shaft diameter :10 mm (milled groove one-sided 1,5 mm)
MY1016Z2 250W Motor Combo for Electric Bike
- MY1016Z 24 Volt DC Operation Permanent Magnet DC Motor
- No Load RPM: 3850 RPM
- No Load Current: <2.2 Amps
- Rated Wattage: 250W (0.33 Horsepower)
- Rated Load RPM: 400
- Torque: 22 NM
- Rated Current: 13.4 Amps
- Efficiency: 78%
- Reduction Ratio: 9.78:1
- Compatible with 9 Tooth Sprocket for 1/2" x 1/8" Pitch Chain
- Chain Size: Pitch 0.5in
- Roller Diameter: 0.3in
- Roller Width: 0.16in
