Raspberry Pi 3-MODB+-1GB Motherboard
- 1.2GHz 64-bit quad-core ARMv8 CPU, 1 GB RAM
- 802.11n wireless LAN, 10/100Mbps LAN speed, Upgraded switched Micro USB power source up to 2.5A
- Bluetooth 4.1, Bluetooth low energy
- 4 USB ports, 40 GPIO pins, full HDMI port, combined 3.5mm audio jack, and composite video
- Camera interface (CSI), Display interface (DSI), Micro SD card slot (now push-pull rather than push-push), Video Core IV 3D graphics core
- Warranty Details: 1-year warranty provided by the manufacturer from date of purchase
8 Inch 350W 24V Brush-less E-bike Wheels Scooter Hub Motor
Solenoid Valve
12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor + Controller
- Motor type: 12-inch brushless toothless hub wheel motor.
- Rated power: 350W.
- Rated voltage: 24V 36V 48V.
- Speed: 20- 35KM / H.
- Speed/RPM: 450RPM.
- Diameter: 275mm.
- Open Size: 140mm.
- Motor Weight: 4.5KG.
- Load Weight: 150 -200KG.
- Brake Compatible： electronic brake, disc brakes.
- Tires: 12X2.125 / 2.5 .
- Waterproof: IP54.
- Application: electric scooter, folding electric car, ebike,e-motorcycle,ebike ,front/rear drive
Raspberry Pi 4 8GB RAM | Raspberry Pi Desktop Computer
- This Raspberry Pi 4 is integrated with a 64-bit quad-core Cortex- A72 ARM v8, Broadcom BCM2711 and runs at a speed of 1.5GHz
- The new Raspberry Pi product is equipped with Bluetooth 5.0, BLE, gigabit ethernet and has 802.11ac wireless at 2.4GHz and 5GHz
- It provides faster data transfer with two USB 3.0 ports, two USB 2.0 ports, micro SD slot for data storage and loading operating systems
- The Raspberry Pi 4 has 2 micro HDMI ports (supports 4k@60p), 2 lane MIPI DSI display port, 2 lane MIPI CSI camera port, and 4-pole stereo audio and composite video port
- Robocraze is the authorized seller of Raspberry Pi products in India
Stepper Motor NEMA 34 122 kg-cm Hybrid Bipolar
- Rated Voltage:4.08V
- Phase: 2
- Current/ phase: 4A
- Holding Torque: 122 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm
- Shaft Length: 37mm
- Shaft Diameter: 13mm
- Long-lasting life
- Low cost for control achieved
- High torque at startup and low speeds
- Ruggedness
- Simplicity of construction
- Can operate in an open-loop control system
- Low maintenance
- Less likely to stall or slip
UNITE DC 48V 750W BM1418ZXF Brushless Gear Motor
MAX 8550 SMD Rework Station , Micro Soldering Station , Hot Air Soldering & Desoldering Station
E-Bike MY1020Z 600W 36V Gear Motor For E-bike Bicycle
- Model: MY 1020Z2. 600W
- Operating Power: 600 W
- Operating Voltage: 36 V
- Rated Current: No Load: 2.5 A Full Load: 40 A
- Rated Speed: Base Motor with No load RPM:3200
- Rated Speed(After Reduction): 480 RPM
- Rated Torque: 1.80 N.m.
- Gearbox: Yes
- Sprocket: 10 tooth #40 chain
- Mounting Bracket: 4-5/8" X 2-3/4"
- Length of Cable: 0.5 Meter
- Weight: 5.438Kg
- Efficiency: ≥78%.
- Application: Small and Medium-size E-Tricycle
- Gear Ratio: 6.67:1
Leadshine DMA860H
- Input voltage: Up to +80VAC or +110VDC.
- Output current Up to 7.2A.
- Pulse input frequency up to 300 KHz.
- Automatic idle-current reduction.
- Over-voltage, over-current protection.
- Suitable for 2-phase and 4-phase motors.
- Support PUL/DIR and CW/CCW modes.
- Operating Temperature : 70 C.
- High performance, cost-effective
- Self-adjustment technology
- Pure-sinusoidal current control technology
- TTL compatible and optically isolated input
- 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev