DC 48V 350W BM1418ZXF Brushless Motor, Electric Bicycle Kit, DIY E-Tricycle
Linear Actuator (Copy)
Product Description
The TFLA38-200 linear actuator the rotary motion of a motor into linear motion allowing for push and pull actions. Components : It mainly consists of a motor, gears, and a worm and tube motion mechanism. Function : It is used for moving objects in a straight line with precision and speed. Common uses : Electric beds and sofas, industrial lifting systems, and furniture.Linear Actuator
Product Description
The TFLA38-100 linear actuator the rotary motion of a motor into linear motion allowing for push and pull actions. Components : It mainly consists of a motor, gears, and a worm and tube motion mechanism. Function : It is used for moving objects in a straight line with precision and speed. Common uses : Electric beds and sofas, industrial lifting systems, and furniture. A103531Linear Actuator
Product Description
The TFLA38-200 linear actuator the rotary motion of a motor into linear motion allowing for push and pull actions. Components : It mainly consists of a motor, gears, and a worm and tube motion mechanism. Function : It is used for moving objects in a straight line with precision and speed. Common uses : Electric beds and sofas, industrial lifting systems, and furniture.Non Unite 350W MY1016Z3 24V GearedMotor
- Model: Non UNITEMOTOR MY1016Z3
- Name: 24V/36V DC Brushed Motor
- Rated Voltage: 24V DC / 36V DC
- Power 350W
- Rated Speed: 24VDC: 3000RPM. 36VDC: 3200RPM.
- No load speed : 3850RPM
- Gear Ratio: 1:9.78
- Rated Torque: 1.11N.m
- Sprocket: 9mm Pitch,
- Pitch: 12.7mm.
- Gear Ratio: 1:9.78
- Installation type: Motor With Foot Stand.
- Easy Install.
- Suit Controller: 24/36v 350w brush controller
- Usage: Electric Bike ,E-tricycle, Electric chairwheel,E-Scooter,E-Motocycle,DIY
Raspberry Pi 4 (2GB)
- 2GB/4GB Varients
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C
- Port Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
- 4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
- 2 × micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- 265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
- Operating temperature: 0 – 50 degrees C ambient
Soldron 938 Soldering Station
Non Unite 500W MY1020 24V Motor
Fluke Multimeter 106
- Count: 6000
- AVG responding
- Voltage: DC: 600 volts; AC: 600 volts; DC Accuracy: ± 0.5% + 3 digit; AC Accuracy: ± 1% + 3 digit
- Current: DC: 10 amps; AC: 10 amps; DC Accuracy: ± 1.5% + 3 digit; AC Accuracy: ± 1.5% + 3 digit
- Resistance: 40 M ohm; Resistance Accuracy: ± 1.5% + 3 digit
- Capacitance: 1000 μF; Capacitance Accuracy: ± 5% + 5 digit
- CAT III 600 volts safety rated