TOP246Y Off-line Switcher IC
TNY276PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 720mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 16Ω
- Simple ON/OFF control, no loop compensation needed
- ON-time extension – extends low line regulation range/hold-up time to reduce input bulk capacitance
- Frequency jittering reduces EMI filter costs
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
- Package: DIP-8B
IRF9540N Power Mosfet Transistor -100V -23A
LM1207N RGB Video Amplifier IC
- Supply Voltage (VCC) 10.8V s VCC s 13.2V
- Supply Voltage (VCC) 15V
- Peak Video Output Source Current 28 mA
- Power Dissipation (PD) 2.5W
- Temperature Range b20 degree C to 80 degree C
- RGB Video Amplifier System with Blanking
- Matched (±0.1 dB or 1.2%) attenuators for contrast control
- Three externally gated single ended input comparators for cutoff and brightness control
- 0V to 4V, high input impedance DC contrast control (>40 dB range)
- 0V to 4V, high input impedance DC drive control for each video amplifier (-6 dB to 0 dB range)
- Spot killer, blanks output when VCC <10.6V
- Capable of 7 VPP output swing (slight reduction in bandwidth)
- Output stage blanking
- Output stage directly drives most hybrid or discrete CRT drivers
9D5N20 N-Channel Mosfet Transistor 200V 9.5A
74LS241 Octal Buffer and Line Driver IC With 3-State Outputs
- Octal Buffer and Line Driver With 3-State Outputs
- Logic Family: LS
- Logic Type: Bipolar
- Polarity: Non-Inverting
- High Level Output Current: -15 mA
- Low Level Output Current: 24 mA
- Number of Channels per Chip: 8
- Propagation Delay Time: 18 ns at 5 V
- No. of Pins: 20
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range: 4.75V to 5.25V
- Package: DIP-20
1.5uf 630V DC Polyester Capacitor
- Capacitance: 1.5uf
- Voltage Rating DC: 630 V
- Tolerance: +/-5%
- Mounting: THT
- Leakage Current: 3 uA
- Dimensions:31*6*2.5 mm
- Operating Temperature: -40~85 C
- Lead Spacing: 7mm
- Lead Diameter : 0.5mm
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance
74LS221 Dual Monostable Multivibrator IC with Schmitt-Trigger Inputs
BC337 NPN Transistor 50V 0.5A
CD4015BE CMOS Dual 4-Stage Static Shift Register IC
74LS47 BCD to Seven Segment Decoder Driver IC
74LS75 4-Bit Bistable Latch IC
- 4-Bit Bistable Latche
- High-level input voltage: 2V
- Low-level input voltage: 0.8V
- High-level output current: -400µA
- Low-level output current: 8mA
- No. of Circuits: 2
- No. of Inputs: 4
- No. of Outputs: 4
- Input clamp voltage: -1.5V
- Propagation delay time: 30ns
- Supply voltage range: 4.75 to 5.25V
- Package: DIP-16