PICKIT-3 Programmer
- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Diagnostic LEDs (power, active, status)
- Read/write program and data memory of the microcontroller
- 1Erase of all memory types (EEPROM, ID, configuration, and program) with verification
- Peripheral freeze at the breakpoint.
- Program up to 512K byte flash.
Brushless DC Motor BLDC Motor
- Less overall maintenance due to absence of brushes
- Reduced size with far superior thermal characteristics
- Higher speed range and lower electric noise generation.
- It has no mechanical commutator and associated problems
- High efficiency and high output power to size ratio due to the use of permanent magnet rotor
- High speed of operation even in loaded and unloaded conditions due to the absence of brushes that limits the speed
- Smaller motor geometry and lighter in weight than both brushed type DC and induction AC motors.
- Long life as no inspection and maintenance is required for commutator system
- Higher dynamic response due to low inertia and carrying windings in the stator
- Less electromagnetic interference
- Low noise due to absence of brushes
ESP32 SIM 800 WITH WIFI MODULE
- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
SERVO MOTOR MG 995- 360 Degree
- Servo type: Analog Servo
- Operation Voltage : 4.8 – 7.2Volts
- Gear Type: All Metal Gears
- Operating temperature: -30 ~ + 60 °
- Dead band setting: 4 microseconds
- Rotation angle: 360°
- Torque: 4.8V: 130.5 oz-in (9.40 kg-cm),
- Speed: 4.8V: 0.20 sec/60°, 6.0V: 0.16 sec/60°
- Stable and shockproof double ball bearing design
- Connection cable is thicker.
- Equips high-quality motor.
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
- Weight: 55g
- Dimension : 40.7 × 19.7 × 42.9 mm
Fan 3 inch 12V 0.2A DC Takumi
100uf 63V Samsung DC Electrolytic Capacitor
12.5uf 250V DC Axial Capacitor
15000uf 63V Samwha DC Electrolytic Capacitor
TOP245YN Off-line Switcher IC
BC639 NPN Transistor 80V 1A
MOQ: 2 nos
- Collector-base Voltage:Â 80V
- Collector Current:Â 1A
- Transistor Polarity:Â NPN
- Total Power Dissipation:Â 1W
- Transition Frequency:Â 200MHz
- Current Gain Min. :Â 40
- Package: T0-92
- Advanced process technology
- Low error voltage
- Fast switching speed
- Full-voltage operation
- High power and current handling capability
G15N60 N-Channel Power Mosfet Transistor 600V 15A
- N-Channel Power Mosfet
- Type Designator: 15N60
- Type of Transistor: MOSFET
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 312 W
- Maximum Drain-Source Voltage |Vds|: 600 V
- Maximum Gate-Source Voltage |Vgs|: 30 V
- Drain Current |Id|: 15 A
- Maximum Junction Temperature (Tj): 150 °C
- Rise Time (tr): 200 nS
- Drain-Source Capacitance (Cd): 270 pF
- Maximum Drain-Source On-State Resistance (Rds): 0.5 Ohm
- Power Dissipation: 38.5W
- Package: TO-220
9N80 N-Channel Power Mosfet Transistor 800V 9A
- N-Channel Power Mosfet
- Type Designator: 9N80
- Maximum Power Dissipation (Pd): 147W
- Maximum Drain-Source Voltage |Vds|: 800 V
- Maximum Gate-Source Voltage |Vgs|: 30 V
- Maximum Drain Current |Id|: 9 A
- Maximum Junction Temperature (Tj): 150 °C
- Rise Time (tr): 37 nS
- Drain-Source Capacitance (Cd): 195 pF
- Maximum Drain-Source On-State Resistance (Rds): 1.05 Ohm
- Power Dissipation: 49W
- Package: TO-220F