Showing 1069–1080 of 3359 results

Advance Metal Chassis 1

Original price was: ₹150.00.Current price is: ₹130.00. inc. GST
  • Dimensions: 115mm x 105mm x 45mm
  • Weight: 200 gm
  • Material: Metal sheet
  • Color: Red.
  • Sheet Thickness: 1.5 mm.
  • Motor Fitting Hole Diameter: 13.75 mm.
  • Many perforated holes have given for easy attachment of development board and sensors.
  • Center Shaft gear motor and side shaft gear motor can be used for this chassis.

ADXL 335 Accelerometer IC

Original price was: ₹600.00.Current price is: ₹500.00. inc. GST
  • 3-axis sensing
  • Small, low profile package
  • 4 mm × 4 mm × 1.45 mm LFCSP
  • Low power : 350 μA (typical)
  • Single-supply operation: 1.8 V to 3.6 V
  • 10,000 g shock survival
  • Excellent temperature stability
  • BW adjustment with a single capacitor per axis
  • RoHS/WEEE lead-free compliant
  • 8V- 3.6V single-supply operation
  • Integrated X, Y, and Z axis accelerometer on a single chip
  • X and Y axis has a 0.5Hz to 1600Hz bandwidth
  • Z axis has a 0.5Hz to 550Hz bandwidth
  • Hermetically sealed for temp and humidity resistance

ADXL345

Original price was: ₹455.00.Current price is: ₹350.00. inc. GST
  • Supply voltage: 3.3V/5V
  • Communication type: I2C/SPI
  • Sensing range: +/-2G to +/-16G
  • Sensitivity
    • X: 28.6 LSB/G
    • Y: 31.2 LSB/G
    • Z:34.5 LSB/g
  • On-board LDO voltage regulator
  • Resolution: 13 bit
  • Single tap/double-tap detection
  • Embedded memory management system with FIFO
  • 10000g shock survival
  • Low power consumption as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical)
  • 3-axis MEMS accelerometer
  • Ideal for noisy power environment
  • Operating temperature: -40 degrees to 85 degrees Celsius
  • Dimension: 28*14mm

AEDIKO ME-8108 Limit Switch Adjustable Roller Lever Arm Momentary Limit Switch NC-NO for CNC Mill Laser Plasma 3D Printer Door Switch

Features: Model: ME-8108 Actuator Action: Momentary Actuator Type: Rotary Adjustable Lever Arm with Roller Contact Configuration: 2 NC + 2

AERODYNAMIC AIRCRAFT DIY KT BOARD B105B AERODYNAMIC AIRCRAFT STEM EDUCATION

Aerodynamic aircraft DIY KT Board B105B STEM kit for learning flight principles, aerodynamics, and aircraft design.

Afr-2000 G1/4” Air Compressor Water Filter with Regulator Air Tool Cleaning

Original price was: ₹900.00.Current price is: ₹850.00. inc. GST
  • Model: AFR2000 (AFR is the model, 2000 refers to the port size)
  • Operating Fluid: Air
  • Joint pipe bore: G 1/4"
  • Range of Adjustable Pressure: 0.05-0.99 MPa
  • Adjustable Pressure: 0.99 MPa
  • Ensured Pressure Resistance: 1.5 MPa
  • Operating Temperature Range: 5℃-60℃
  • Filter Grade: 40 µ
  • Capacity of Body: 15 cc
  • Gauge caliber: G1 / 8
  • Material: Metal, plastic
  • Discharge water automatically
  • Lightweight, small size, easy installation, and maintenance
  • No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure
  • Dimension: 6.29 x 2.75 x 2.75 inch

AfroFlight Naze32 Rev6 Flight Controller Board

Original price was: ₹1,799.00.Current price is: ₹1,749.00. inc. GST
  • Version: 6 DOF
  • Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
  • USB on right side
  • 32-bit processor running at 3.3V/72MHz (STM32F103CB).
  • Up to 8 Ch. RC input - supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spectrum satellite receivers
  • Built-in FrSky telemetry inverter
  • Battery voltage monitoring
  • SBUS Inverter built-in
  • Spectrum satellite
  • Modern GUI for all operating systems, Baseflight Configurator.
  • Supports multiple platforms: Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
  • MPU6500 : 3-Axis MEMS Gyroscope + accelerometer
  • Onboard MicroUSB for setup and configuration
  • BMP280 barometer
  • Modern GUI for all operating systems, Baseflight Configurator.
  • Sonar pads w/resistors added for direct connection to 5V sonar3.3V
  • Dimensions: 36x36 mm (30.5mm Mounting)
  • Weight: 5.3 grams (no headers, 7.3 grams with).
 

AH49E linear Hall effect sensor module

The AH49E Linear Hall Effect Sensor Module provides an analog output proportional to magnetic field strength, ideal for position, speed, and magnetic sensing projects.

AI Robot Voice Box

AI Robot Voice Box – Add smart, interactive voice to your robots. Easy integration, programmable, and perfect for DIY robotics projects.

AI Thinker A9G GSM/GPRS+GPS module

AI Thinker A9G GSM/GPRS + GPS module with quad-band 2G support, SMS, voice, data, and real-time location tracking—ideal for IoT, vehicle tracking, and monitoring projects.

AI Thinker NF-01N Wireless ESP8266

AI Thinker NF-01N Wireless ESP8266

Compact Wi-Fi module for IoT projects. Easy integration, low power, and reliable wireless connectivity for smart devices, sensors, and automation systems.

AI Thinker SX1278 LoRa RA-01 433MHz Wireless Transceiver Module with Baseboard

AI Thinker SX1278 LoRa RA-01 433MHz Wireless Transceiver Module with Baseboard

High-performance 433MHz LoRa module with baseboard for long-range, low-power wireless communication—perfect for IoT, smart devices, and remote sensing projects.