8mm Bore Inner Ball Mounted Pillow Block
SC10UU 10mm Linear Motion Bearing Slide Bushing Block
PR53 215mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
GT2 Open Timing Belt for 3D Printer and CNC
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
24V 40W Ceramic Cartridge Heater Wire For 3D Printer
- Voltage: 24V, Power: 40W
- Material: 304 Stainless Steel
- Wire Length :1M
- Diameter: 6mm
- Length: 20 mm
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
Lead Copper Nut 8mm
12V 40W CR-10 ender 3 Extruder Assembled MK8 Hot End Kit for CR10 CR-10S S4 S5 Ender-3 Ender-3S Aluminum Heated Block parts 0.4m
- Material: Aluminium & Stainless Steel & Brass.
- Installation Type: External Thread Connection.
- Application: Creality CR10.
- Nozzle size: 0.4mm/1.75mm.
- Throat pipe length: 30mm.
- Teflon tube: 0204/Length: 1m.
- Heating tube: 12V/24V 40W/Length: 1m.
- Thermistor: 100K NTC B 3950 ±1% /Length 1m.
- Aluminium block size: 20 mm x 20 mm x 10 mm.
- Operating temperature range: -40 ~ +260degC (-40 ~ +500 degF).
12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers
- Material: stainless steel,
- Core: ceramic.
- Voltage: 12V.
- Power: 40W.
- Diameter: 6mm, Heating Length: 20 mm.
- Wire Length: 100 cm.
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
100K ohm NTC 3950 Thermistor/Temperature Sensor for Reprap 3D printer Extruder
- High-temperature Teflon wire temperature: 200 degrees
- Nominal resistance R25 (25 ℃): 100k
- Resistance accuracy: ± 1%
- B value R25 / 50: 3950k
- B value accuracy: ± 1%
- Operating temperature range: -40 ℃ ~ +300 ℃
- Dissipation power factor: ≥ 5 mW / ℃ (static air)
- Thermal time constant: ≤ 7S (static air)
- Maximum rated power: 45mW
- Wiring length: 1 meter
- Material: glass glaze film
Creality ender 5 plus print large build volume ender 5 plus 3d printer with bl touch color
- Â Print Size: 300*225*380mm
- Machine Size: 530*487*612mm
-  Package Szie： 625*547*710mm
- Filament diameter: 1.75 mm PLA/ABS
- File Format: STL/OBJ/AMF
- Â Layer Heigh: 0.1-0.4mm
- Slicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
- Â Connectivity: Online/SD card
- Mainboard: ATmega2560 Silent board
- UI interface: 4.3inch touch screen
Creality CR-5 Pro 3D Printer with bl touch and silent motherboard 500w meanwell
• Print Size: 300*225*380mm
• Machine Size: 530*487*612mm
• Package Szie： 625*547*710mm
• Filament diameter: 1.75 mm PLA/ABS
• File Format: STL/OBJ/AMF
• Layer Heigh: 0.1-0.4mm
• Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
• Connectivity: Online/SD card
• Mainboard: ATmega2560 Silent board
• UI interface: 4.3inch touch screen