Pedal Throttle for Electric Scooter/Bike/Tricycle Accelerator Foot Pedal – Type 2
16 Teeth Freewheel Sprocket
DC Gearless 500 Watt Motor for E-bike
- Brushed Motor Permanent Magnet
- Speed: 2500 rpm
- Rated Power: 500W
- Rated Voltage: 24v
- Current Draw (Rated): 27.4A
- Current Draw (No Load): 2.5A
- Rated Torque: 1.9 N.M.
- Rated Speed: 2500 RPM
- Efficiency: Greater than 75%
- Number of teeth: 11, Pitch 6.35 #25 Chain
- Diameter: 4 1/4"
- Length (no shaft): 5 1/4"
- Length (with shaft): 6 1/4"
- Weight: 4.1kg
High Quality Brake Lever for Ebike
• 100% Brand new and high-quality product
• Adopting full aluminum material, high performance of durability and stability.
• Suitable for many kinds of cycling bikes with a 22.5 mm handlebar, such as mountain bike, road bike and more.
• The 1.5 m low-level brake cable has no negative pole or positive pole distinction, can be arbitrarily connected to the electric brake switch.
• It plays a big role in protecting the motor and prolongs your motor’s lifespan.
• A good replacement part for your old or damaged brake lever of a bike.
• Long life
• High reliability and stability
250W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit – Basic
Pedal Throttle for Electric Scooter/Bike/Tricycle Accelerator Foot Pedal – Type 1
250W 36V Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit – Advanced
#25 Chain for 6.35mm pitch sproket – Ebike Scooter
- #25 or #25H Chain
- Length: 17.8 inch (Full Length: 35.6 inch)
- Pitch: for 6.35mm Pitch Sprockets
- Link: 141 Links
- High-quality product
- Wide variety of Applications
- Improves efficiency and extends the range of Electric Bikes
- Ensures efficient transfer of Power and prolongs Battery Life
- Note - These chains are compatible with MY1016 250W Non Geared Motor and MY1016 350W Non Geared Motor
Non Unite 350W MY1016Z3 24V GearedMotor (Copy)
- Model: Non UNITEMOTOR MY1016Z3
- Name: 24V/36V DC Brushed Motor
- Rated Voltage: 24V DC / 36V DC
- Power 350W
- Rated Speed: 24VDC: 3000RPM. 36VDC: 3200RPM.
- No load speed : 3850RPM
- Gear Ratio: 1:9.78
- Rated Torque: 1.11N.m
- Sprocket: 9mm Pitch,
- Pitch: 12.7mm.
- Gear Ratio: 1:9.78
- Installation type: Motor With Foot Stand.
- Easy Install.
- Suit Controller: 24/36v 350w brush controller
- Usage: Electric Bike ,E-tricycle, Electric chairwheel,E-Scooter,E-Motocycle,DIY
MY1016Z2 250W Motor Combo for Electric Bike
- MY1016Z 24 Volt DC Operation Permanent Magnet DC Motor
- No Load RPM: 3850 RPM
- No Load Current: <2.2 Amps
- Rated Wattage: 250W (0.33 Horsepower)
- Rated Load RPM: 400
- Torque: 22 NM
- Rated Current: 13.4 Amps
- Efficiency: 78%
- Reduction Ratio: 9.78:1
- Compatible with 9 Tooth Sprocket for 1/2" x 1/8" Pitch Chain
- Chain Size: Pitch 0.5in
- Roller Diameter: 0.3in
- Roller Width: 0.16in
MY1016 250W Motor DIY E Bike Combo Kit
- Electric Bicycle permanent Magnet DC Motor MY1016.
- Rated Operating Voltage: 24VDC
- Rated speed: 2650 RPM
- Rated Current: 13.7A
- Current without load: 0.7 – 1.4 A
- Rated Torque: 8.87 Kgcm
- Rated Output Power: 250W
- Transmission :chain sprocket (11 teeth, pitch 1/4"=6,35 mm)
- Nut shaft diameter :10 mm (milled groove one-sided 1,5 mm)
Plastic Power Lock/Ignition Key Switch – 2 pin Female
- Comes with 2 pins male connector (white) and includes 2 keys.
- Applicable for MY1016 controllers.
- Wire Length: 270mm
- Total lock Length: 325mm
- Plug is 11mm x 6mm.
- Durable, convenient to use.
- Easy installation, with 2 keys.
- Designed with a reliable ignition switch locking mechanism.
- Fitment: Fit for electric bicycle, Carting.
- ​Material: Plastic.