6V 300mA Solar Panel
- Max output power: 3.23W
- Max working voltage: 6.6V
- Max charging current: 490mA
- Min output power: 2.7W
- Min working voltage: 6V
- Min charging current: 450mA
- Small Epoxy Solar Panels are simple to install or add to your existing product
- Construction requires no frame or special modifications
- Small space required for installation.
- Has 2 to 3 times the power of amorphous thin-film solar panels
- Ready to use, they require no frame or special modifications.
- For connection, just solder or crimp to the copper tape.
- Laser cut to proper size and encapsulated in special sun and weather resistant materials;
- Dimensions: 13.2 Cm X 15 Cm Thickness 3mm +/- 2 mm
- Weight 136gm
XB NEMA 23 (57mm) Coupling 8x8mm
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Dimensions: bore size: 8mm x 8mm.
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
- Suitable for Nema 23 Stepper Motor or for any motor/rod having an 8mm diameter
- Widely used in motors, stepper motors, encoders, and servo machines.
250V Float Switch Sensor for Water Level Controller-Big
- Protection: Waterproof
- Medium Working Pressure: Max 1 Bar
- Circuit Breaking Capacity: Directly KW with 250V
- Medium Temperature: 70 Deg.C.
- Mechanical endurance: ≥100,000 times
- Electrical endurance: ≥500,000 times
- Cable length: 3m
- Corrosion Free,
- Sturdy and durable & need no maintenance.
- No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
- Long life (approximate 10 million operations)
- Rust proof (entire sensor body in polypropylene)
- Used in hard water or fuel such as diesel, kerosene, oil etc.
- Dimensions : 11 x 9 x 5cms
- Weight 690 grams
PIC18F458 Microcontroller IC
- Maximum CPU Frequency: 40 MHz
- Architecture: 8 bit
- Program Memory (Flash): 32 kB
- RAM: 1536 byte
- Internal Oscillator: No
- ADC: 1 (8 channels)
- of Pins: 40
- Voltage: 2V - 5.5V
- Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Watchdog Timer (WDT) with its own on-chip RC oscillator
- Programmable code protection
- Power-saving Sleep mode
- Selectable oscillator options, including:
- In-Circuit Serial ProgrammingTM (ICSPTM) via two pins
- Low-power, high-speed Enhanced Flash technology
- Fully static design
- Wide operating voltage range (2.0V to 5.5V)
- Industrial and Extended temperature ranges
PIC16F876A Microcontroller IC
- Maximum CPU Frequency: 20 MHz
- Architecture: 8 bit
- Program Memory (Flash): 14 kB
- RAM: 368 byte
- Internal Oscillator: No
- ADC: 1 (5 channels)
- of Pins: 28
- Voltage: 2V - 5.5V
- 100,000 erase/write cycle Enhanced Flash program memory typical
- 1,000,000 erase/write cycle Data EEPROM memory typical
- Data EEPROM Retention > 40 years
- Self-reprogrammable under software control
- In-Circuit Serial Programming™ (ICSP™) via two pins
- Single-supply 5V In-Circuit Serial Programming
- Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- Programmable code protection
- Power saving Sleep mode
- Selectable oscillator options
- In-Circuit Debug (ICD) via two pins
- CMOS TECHNOLOGY:
- Low-power, high-speed Flash/EEPROM technology
- Fully static design
- Wide operating voltage range (2.0V to 5.5V)
- Commercial and Industrial temperature ranges
- Low-power consumption
AP Extension pigtail SMA female socket jack to UFL IPX Connector
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
- Motor power supply Range: 4.5V ~ 36V
- Control power Range: 4.5V ~ 9V (10VMAX)
- Logic Operating current: ≤60mA
- Drive part of the work current Io: ≤1.2A
- Maximum power dissipation: 4W
- Drive Type: Dual high-power H-bridge driver
- Working temperature: -25 ℃ ~ + 125 ℃
- ESP12 DEV KIT development board expansion module
- Lead ESP12 DEV KIT all the features of pins: SPI, UART, GPIO, AI, and 3.3V power connector
- Extend two-way motor-driven, two-way direct-drive motor
- on board power switch
- Motor power, control power separation
- Dimension: 60 x 45 x 13mm
XB NEMA 23 (57mm) Coupling 8×9.5mm
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Large Bore Diameter: 9.5mm
- Small Bore Diameter: 8mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
- Suitable for Nema 23 Stepper Motor or for any motor/rod
- Widely used in motors, stepper motors, encoders, and servo machines.
12V SOLENOID VALVE
- Voltage: 12V DC
- Power consumption: 5.4W
- Rated Current: 0.6A
- Operation Mode: NC (Normally Closed)
- Pressure: 0.02 – 0.8MPa
- Max fluid temperature: 100°C
- 1/2" BSP male connections, 2-way normally closed solenoid valve, 12V DC
- Valve orifice: DN 10 mm
- Electrical connection: Fast-on tags
- Compact and convenient.
- Easily installed and serviced
- Precise and reliable.
- Pressure-regulating valve
- Suitable for fluids like water, oil, air.
SERVO MOTOR MG 995- 360 Degree
- Servo type: Analog Servo
- Operation Voltage : 4.8 – 7.2Volts
- Gear Type: All Metal Gears
- Operating temperature: -30 ~ + 60 °
- Dead band setting: 4 microseconds
- Rotation angle: 360°
- Torque: 4.8V: 130.5 oz-in (9.40 kg-cm),
- Speed: 4.8V: 0.20 sec/60°, 6.0V: 0.16 sec/60°
- Stable and shockproof double ball bearing design
- Connection cable is thicker.
- Equips high-quality motor.
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
- Weight: 55g
- Dimension : 40.7 × 19.7 × 42.9 mm
TowerPro MG996R 360 Deg Rotation Digital High Torque Servo Motor
- Gear Type: Metal gear
- Servo Plug: JR (Fits JR and Futaba)
- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
- Servo arms & screws included, and fit with Futaba servo arm
- It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
- CE & RoHS approved