Offside Geared Motor 24V 30 rpm High Torque
- Voltage : 18v to 30v
- RPM :30 (at 24v)
- Nominal Voltage: 24v
- No- Load Current : 35mA
- Full Load Current:800mA
- Full (Stall) Load Torque: 20kgcm
- Shaft diameter: 6 mm
- The lightweight and compact-sized motor with high performance.
- The Shaft is D type hence wheel/ coupling arrangement is simple.
- Useful for hobbyists and for a DIY project.
- Weight: 150gm
24v DC Gear, Geared Offside Motor 75 rpm High Torque
- Voltage : 18v to 30v
- RPM :75 (at 24v)
- Nominal Voltage: 24v
- No- Load Current : 35mA
- Full Load Current:800mA
- Full (Stall) Load Torque: 10kgcm
- Shaft diameter: 6 mm
- The lightweight and compact-sized motor with high performance.
- The Shaft is D type hence wheel/ coupling arrangement is simple.
- Useful for hobbyists and for a DIY project.
- Weight: 150gm
45 RPM 12V DC PLANETARY GEAR MOTOR – HIGH TORQUE
100uf 10V DC Tantalum Capacitor
- Capacitance: 100uF
- Rated voltage: 10V
- Case code: D case
- Capacitance tolerance: ±10%
- Operating temperature range: -55°C to +125°C
- Lead-free type
- RoHS directive-compliant
- Mounting type: SMD (surface-mounted device)
- Dielectric Material: Tantalum
- Number of Pins:2
- Dissipation Factor:6 %
- ESR (Equivalent Series Resistance): 600 mOhm
- Leakage Current: 16 uA
2.2uf 300V AC Box Capacitor
- Capacitance: 2.2 uf
- Voltage Rating: 300V
- Dielectric Type: Double Metallized PP
- Capacitance Tolerance: ± 5%
- Capacitor Case Style: Radial Box
- Capacitor Terminals: Radial Leaded
- Operating Temperature Min: -55°C
- Operating Temperature Max: 105°C
- Self-healing
- Low losses
- High ripple current
- High contact reliability
- Suitable for high frequency application
3/4″ Brass Electric Solenoid Valve 12VDC N.C. Air Water Fuel
- Size: 3/4"
- Flow Aperture: 20 mm
- Body Material: Brass
- Gasket / Diaphragm / Seal: VITON
- Rated voltage: DC 12 V, ± 10%
- Current: 1.667 A
- Power rating: 20 W
- Operation Type: Semi-direct Lift Valve
- Operation Mode: Normally Closed
- Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
- Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
- Flow value: 7.6 Cv
- Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
- Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)
- Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
- Quality assurance: CE Certified
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
SB1045CT Dual Diode 10A 45V
- Maximum Recurrent Peak Reverse Voltage Vrrm : 45 V
- Maximum RMS Voltage Vrms: 31.5 V
- Maximum DC blocking Voltage Vdc: 45 V
- Maximum Forward Voltage per leg and 25°C at 5A, Vf : 0.53 V
- Maximum Recurrent Peak Reverse Voltage: 45 V
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound.
- Exceeds environmental standards of MIL-S-19500/228
- Low power loss, high efficiency.
- Low forward voltage, high current capability
- High surge capacity.
- For use in low voltage, high frequency inverters free wheeling , and polarity protection applications.
- Lead Free in compliance with EU RoHS 2011/65/EC directive
S20C45C Dual Diode 20A 45V
- Peak Repetitive Reverse Voltage VRRM: 45V
- RMS Reverse Voltage VR(RMS): 32V
- Maximum Instantaneous Reverse Current at TC=100oC, IR: 20mA
- Low power loss, high efficiency.
- Low forward voltage, high current capability
- High surge capacity.
- For use in low voltage, high frequency inverters free wheeling , and polarity protection applications.
LM1269 RGB Video Amplifier IC
- 110 MHz I2C Compatible RGB Video Amplifier System with OSD & DACs
- 110 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0ËšC to 70ËšC
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150ËšC
- ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265ËšC