LM723 Precision Voltage Regulator IC
74LS42 BCD to Decimal Decoder IC
IRF730 N-Channel Power Mosfet Transistor 400V 5.5A
- N-Channel Power Mosfet
- Drain Source Voltage: 400V
- Drain Current: IDÂ = 5.5A at TCÂ = 25oC
- Static Drain-to-Source On-Resistance: RDS(on) = 1000 mΩ
- Qg Typical: 25.3Nc
- Package: TO-220AB
- Dynamic dV/dt rating
- Repetitive avalanche rated
- Fast switching
- Ease of paralleling
- Simple drive requirements
- Compliant to RoHS directive 2002/95/EC
74LS374 Edge-Triggered D Flip-Flop IC
- Edge-Triggered D Flip-Flop
- High-level input voltage:Â 2V
- Low-level input voltage:Â 0.8V
- High-level output voltage:Â 5.5V
- High-level output current:Â -6.5mA
- Input clamp voltage:Â -1.2V
- Maximum clock frequency:Â 100MHz
- Propagation delay time:Â 18ns
- Supply voltage range:Â 4.75 to 5.25V
- Package:Â DIP-20
74LS161 4-Bit Binary Counter IC
- 4-Bit Binary Counter
- Supply Voltage Range:Â 4.75V to 5.25V
- Supply Current Max.:Â 32mA
- Clock Frequency Max.:Â 32MHz
- HIGH Level Input Voltage Min.:Â 2V
- LOW Level Input Voltage Max.:Â 0.8V
- HIGH Level Output Voltage Min.:Â 2.7V
- LOW Level Output Voltage Max.:Â 0.5V
- High level Output Current Max.:Â -0.4mA
- Low level Output Current Max.:Â 8mA
- Input Clamp Voltage Max.:Â -1.5V
- Propagation Delay Time Max.:Â 35ns
- Package:Â DIP-16
20N60 Field Stop IGBT 600V 20A
HT93214A Memory Tone/Pulse Dialer
A6259 Fly Back Switching Regulator IC
- Universal-Input 13 W 100 kHz Fly back Switching Regulator
- 100 kHz PWM with ±5% frequency jittering for EMI noise filtering cost reduction
- Rugged 650 V avalanche-rated MOSFET:
- Low RDS(on) : 6 Ω maximum
- Auto-burst mode for stand-by operation or light loads; less transformer audible noise
- Built-in leading edge blanking
- Soft start and low start-up current; start-up circuit disabled in operation
- Auto-burst stand-by (intermittent operation) input power <0.1 W at no load
- Built-in constant-voltage/constant current (CV/CC)
- Multiple protections:
- Operation Start Voltage 15.7V
- Startup Current 1.43mA
KA3524 Voltage Mode PWM Control Circuit IC
- Voltage Mode PWM Control Circuit with 200mA Output Drivers
- Output Current (Each Output): 200mA
- Reference Output Current: 50mA
- Oscillator Charging Current: 5mA
- Power Dissipation: 1000mW
- Turn-on Threshold Voltage: 7.5V
- Turn-on Current: 2.5mA
- Output Voltage: 5V
- Maximum Oscillator Frequency: 500KHz
- Line Regulation: 10mV
- Load Regulation: 20mA
- Collector Emitter Voltage: 80V
- Package: Dip-16
IR LED 5mm
MOQ : 5NOS
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
PIC12F508 Microcontroller IC
- Maximum CPU Frequency: 4 MHz
- Architecture: 8 bit
- Program Memory (Flash): 0.75kb
- RAM: 25 byte
- Internal Oscillator: 4 MHz
- of Pins: 8
- Voltage: 2V - 5.5V
- 4 MHz Precision Internal Oscillator: - Factory calibrated to ±1%
- In-Circuit Serial Programming™ (ICSP™) •
- In-Circuit Debugging (ICD) Support
- Power-On Reset (POR)
- Device Reset Timer (DRT) •
- Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
- Programmable Code Protection
- Multiplexed MCLR Input Pin
- Internal Weak Pull-Ups on I/O Pins
- Power-Saving Sleep mode
- Wake-Wp from Sleep on Pin Change
- Selectable Oscillator Options:
- Operating Current: - < 175 μA @ 2V, 4 MHz, typical
- Standby Current: - 100 nA @ 2V, typical
- Low-Power, High-Speed Flash Technology: - 100,000 Flash endurance - > 40 year retention
- Fully Static Design
- Wide Operating Voltage Range: 2.0V to 5.5V
- Wide Temperature Range:
