KBPC5010 Bridge Rectifier 50A 1000V
- Maximum recurrent peak reverse voltage: 1000V
- Maximum RMS voltage: 700V
- Maximum DC blocking voltage: 1000V
- Maximum forward voltage per diode: 1.1V
- Maximum average forward current: 50A
- Peak forward surge current (single half sine-wave): 400A
- Maximum DC reverse current
- At 25℃: 10µA
- At 125℃: 500A
- Operating temperature range: -40℃ to +150℃
- High current capability
- Â Surge overload ratings : 400 Amperes
- High Efficiency
- Low Power Loss
- Low reverse leakage current
- Electrically isolated Metal case for Maximum Heat Dissipation
- High case dielectric strength
KBPC3510 Bridge Rectifier 35A 1000V
- Maximum peak recurrent reverse voltage: 1000V
- Maximum RMS bridge input voltage: 700V
- Maximum DC blocking voltage: 1000V
- Maximum forward rectified output current: 35V
- Peak forward surge current 8.3 ms half sine-wave superimposed on rated load: 400A
- Maximum forward voltage drop: 1.1V (per elements at 17.5A DC)
- Maximum DC reverse current at rated DC blocking voltage per elements: 10µA
- Rating for fusing (I2T, t<8.3ms): 664 A2sec
- Operating temperature: -55℃ to 150℃
- High current capability
- Surge overload rating: 400A peak
- High Efficiency
- Low Power Loss
- Low reverse leakage current
- Electrically isolated Metal case for Maximum Heat Dissipation
- High case dielectric strength
BY127 Diode
40HMR120 Metal Diode 40A 1200V
KBPC2510 Bridge Rectifier 25A 1000V
- Maximum Recurrent Peak Reverse Voltage Vrrm : 1000V
- Maximum RMS Voltage Vrms:Â 700V
- Maximum DC blocking Voltage Vdc:Â 1000V
- High current capability
- High Efficiency
- Low Power Loss
- Low reverse leakage current
- Electrically isolated Metal case for Maximum Heat Dissipation
- High case dielectric strengthPeak Reverse Volatge - 50V to 1000V
- Case to Terminal Isolation Volatge - 2500V
- Diffused Junction
TS4B05G Flat Bridge Rectifier 4A 50V
CD4060 14 Stage Ripple Carry Binary Counter or Divider and Oscillator IC
- 14 Stage Ripple Carry Binary Counter or Divider and Oscillator
- Supply Voltage Range:Â 3 to 20V
- Input Current: ±10mA
- Power Dissipation:Â 200mW
- Low level Output Voltage:Â 0.05V
- High level Output Voltage Min.:Â 4.95V
- Low level Input Voltage Max.:Â 1.5V
- High level Input Voltage Min.:Â 3.5V
- Maximum Clock Frequency:Â 24MHz
- Propagation Delay Time Max.:Â 740ns
- Package:Â DIP-16
AD633 Analog Multiplier IC
- Analog Multiplier
- Four-Quadrant Multiplication
- Low Cost 8-Lead Package
- Complete—No External Components Required
- Laser-Trimmed Accuracy and Stability
- Total Error Within 2% of FS
- Differential High Impedance X and Y Inputs
- High Impedance Unity-Gain Summing Input
- Laser-Trimmed 10 V Scaling Reference
- Supply Voltage:18V
CD4045BE CMOS 21-Stage Counter IC
AD590 Temperature Transducer IC
- 2-Terminal IC Temperature Transducer
- Linear current output: 1 μA/K
- Wide temperature range: −55°C to +150°C
- Probe-compatible ceramic sensor package
- 2-terminal device: voltage in/current out
- Laser trimmed to ±0.5°C calibration accuracy (AD590M)
- Excellent linearity: ±0.3°C over full range (AD590M)
- Wide power supply range: 4 V to 30 V
- Sensor isolation from case
- Operating Voltage:30V
CD4033BE CMOS Decade Counter Divider IC
AD536 Integrated Circuit RMS-DC Converter IC
- Integrated Circuit RMS-DC Converter
- True RMS To DC Conversion
- Laser Trimmed to High Accuracy
- 0.2% Max Error (AD536AK)
- 0.5% Max Error(AD536AJ)
- Wide Response Capability
- Computes RMS of AC and DC Signals
- 450kHz Bandwidth: Vrms>100mV
- 2 MHz Bandwidth: Vrms>1V
- Signal Crest Factor of 7 for 1% error
- DB Output With 60db Range
- Low Power:1.2mA Quiescent Current
- Single or Dual Supply Operation
- Monolithic Integrated Circuit
- -55C-+125C Operation(AD536AS)