Multitec 150b Wire Stripper & Cutter SS
Multitec 07 Nippers and Micro Shears Alloy Steel (Blue)
Multitec mt-02dx Self Adjusting Cutter/Stripper
- Brand : Multitec
- Dimension (L x B x H) : 15.2 x 12.7 x 7.6 Centimeters
- Flawless Finish
- Optimum Strength
- Best Quality
- Cutting range of wire 0.5mm to 2.5mm & 6mm
- Also Suitable for Electronic, Aviation &Â Automobile sectors
- H-1 FEET L-1/2 FEET
- For all types of wires from 0.2mm to 6mm
- Self-adjustive and no damage to inner core
Multitec Industries Ltd Stainless Steel MT012 SS Diagonal Nipper
Wire Stripper Flat Nose Cable Cutter with Practical Punch Down Tool
- Color: Yellow
- Material: ABS Stainless Steel
- Length: 92 mm
- Weight: 10 gm.
- It works great and strips smoothly and cleanly.
- This wire stripper is small and exquisite, which is very convenient and practical.
- It works great and strips smoothly and cleanly.
- This wire stripper is small and exquisite, which is very convenient and practical.
- Easy to operation, so you don`t worry that the blade would nick the inside wires.
- It cuts cables with different thickness and cuts very clean and takes only a few seconds.
Generic Portable MT87 Digital Multimeter LCD Clamp AC DC Voltage Current Amp Ohm Tester
• Function Range: Accuracy
• DC voltage: 600V±0.8%+1dgt
• AC voltage: 450V±1.0%+4dgts
• Resistance: 200KΩ±1.0%
• AC Current: 20A-200A-400A±2.0%+5dgts
• Power supply: 1.5V 2x AAA batteries (not included)
• Max display: 1999
• Buzzer: Yes
• Diode test: Yes
• Data hold: Yes
• Dimension: 150L×63W×28H(mm)
• Display size: 14mm×47mm
• Color: black+yellow
• Material: plastic+electronic part
AZDS2-0XDQSA4 Hex Drive Power Drill Socket Extension Bit Adaptor Set – Pack of 3 Pieces
- Material: Chrome Vanadium steel
- Shank Type: Hex Shank
- Size- 1/4, 3/8,1/2-inch.
- Pack of 3.
- Available in multicolour.
- Good quality product.
- Can be used for prolonging different kinds of screwdrivers.
- Built-in magnetic, fast, fastening, greatly improve work efficiency.
- Suitable for electric drill, screwdriver, wind batch transfer using to play the role of releasing bit holder.
- Interface comes with a locking function
2 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degree C
- Holes for Mounting: 3 mm
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 13*30*9mm
- Weight: 3gm
AC 100A LCD Digital Power Meter Kwh Time Watt Voltmeter Ammeter with Ct
3. 5X / 12X Helping Hand Magnifier with Soldering Stand & LED Light
- Material of lens: Glass
- Lens Diameter: 2.56 inch/65mm
- Color: Black + Silver
- Useful Aid for soldering work or model makers. Ideal when a third hand is needed
- Adjustable crocodile holding clamps
- With two LED lighting, this model can work very well in the dark environment
- The bottom battery compartment is furnished with a steel plate which can enhance stability
- With three pcs of AAA batteries (not included), large capacity, this model can continuously discharge more than 10 hours, expediently be used
- Can also be used when model making, jewelry making, watch repairs and craft work
- Weld holder size: 1.18 x 3.54inch
- Base size: 3.93 x 2.56 x 0.79inch
- Weight: 6g
XH-W1219 12V Digital Display Temperature Controller Module W/NTC Waterproof Temperature Sensor
XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
- Rated Current: 10 Amp Max.
- Measurement Input: NTC10K
- Temp Probe Cable Length: 1 Meter
- Power Supply: DC12V
- Load Power: 120W
- Easy to install
- Output type: Direct output
- Output capacity: max 10A
- Temperature setting upper and lower limits
- Temperature measuring range: -50~110°C
- Temperature control range: -50~110°C
- Control precision: up to 0.1°C
- Up key: Press once to display the start temperature. Long press to set start temperature.
- Down key: Press once to display the stop temperature. Long press to set stop temperature.
- Temperature setting upper and lower limits
- Simple operation, suitable for seafood machines.
- Dimensions 60 x 45 x 31 (mm)
- Weight: 55gm