Showing 1–12 of 19 results

DC 6V-40V TO 5V 3AMP DOUBLE USB CHARGER DC-DC STEP DOWN CONVERTOR MODULE

• Input voltage: DC 6 ~ 40V • Output voltage: 5V (when the input voltage is between 6.5V ~ 40V • The voltmeter has an automatic calibration function • With reverse connection protection • With overheat protection and short circuit protection • The voltmeter has an automatic calibration function • With reverse connection protection. • With overheat protection and short circuit protection • High efficiency and low ripple • With USB power indicator light.

10A DC-DC Step-down Adjustable Constant Voltage Module

₹650.00 inc. GST
  • Input Supply voltage:7 V~ 40V
  • Output voltage: Continuously adjustable (1.25 ~ 35V)
  • Output Current :8A (10A maximum)
  • Conversion efficiency : 95%
  • Operating frequency: 300 KHz
  • No-load current: Typical 20mA
  • Load regulation: ± 1%
  • Voltage Regulation: ± 1%
  • Short Circuit Protection

QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V

  • Input voltage: 6V-32V.
  • Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
  • Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
  • Output voltage cable compensation function.
  • Conversion efficiency: 90%-97%.
  • Support multiple fast-charging protocols.
  • Input overvoltage and under-voltage protection.
  • Input overcurrent protection.
  • Output overcurrent, short circuit protection.
  • Machine over temperature protection.
  • Support fast charge agreement
  • Support DCP protocol, BC1.2.
  • Support Huawei Fast Charge Protocol FCP/SCP.
  • Support Huawei Fast Charge Protocol AFC.
  • Support Spreadtrum Fast Charge Protocol SFCP.
  • Support QC2.0 and 3.0.
  • Support MTK PE1.1/PE2.0

QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module Fast Quick Charger Circuit Board

  • Input voltage: 6V-32V.
  • Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
  • Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
  • Output voltage cable compensation function.
  • Conversion efficiency: 90%-97%.
  • Support multiple fast-charging protocols.
  • Input overvoltage and under-voltage protection.
  • Input overcurrent protection.
  • Output overcurrent, short circuit protection.
  • Machine over temperature protection.
  • Support fast charge agreement
  • Support DCP protocol, BC1.2.
  • Support Huawei Fast Charge Protocol FCP/SCP.
  • Support Huawei Fast Charge Protocol AFC.
  • Support Spreadtrum Fast Charge Protocol SFCP.
  • Support QC2.0 and 3.0.
  • Support MTK PE1.1/PE2.0

QC3.0 QC2.0 USB DC-DC Buck Converter Step Down Module Fast Quick Charger Circuit Board

  • Input voltage: 6V-32V.
  • Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
  • Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
  • Output voltage cable compensation function.
  • Conversion efficiency: 90%-97%.
  • Support multiple fast-charging protocols.
  • Input overvoltage and under-voltage protection.
  • Input overcurrent protection.
  • Output overcurrent, short circuit protection.
  • Machine over temperature protection.
  • Support fast charge agreement
  • Support DCP protocol, BC1.2.
  • Support Huawei Fast Charge Protocol FCP/SCP.
  • Support Huawei Fast Charge Protocol AFC.
  • Support Spreadtrum Fast Charge Protocol SFCP.
  • Support QC2.0 and 3.0.
  • Support MTK PE1.1/PE2.0

5V 700mA 3.5W AC-DC Step Down Module

  • Input Voltage: 220VAC
  • Output Voltage: 5 VDC.
  • Output Power: 3.5W.
  • Output Current: 700mA
  • Output overload and short circuit protection
  • Ultra-thin and ultra-small size
  • Supply Voltage: 220VAC
  • Low ripple and low noise
  • Output overload and short circuit protection
  • High efficiency
  • High power density
  • The product is designed to meet the requirements of the EMC and Safety Test
  • Low power consumption
  • Environmental protection
  • Meets UL and CE requirement

LM 2576HV Buck Module

₹199.00 inc. GST
  • Module Properties: non-isolated constant voltage module
  • Rectification: non-synchronous rectification
  • Input voltage: 4.5V-60V
  • Output Voltage(Less than input): 1.3V-26V
  • Continuous operating current: 1.2A (output total power within 20W)
  • Output current: 3A maximum
  • Conversion efficiency: 92% (maximum)
  • Switching frequency: 52KHz
  • Output ripple: 50mV (maximum) 20M-bandwidth
  • Load regulation: ± 0.5%
  • Voltage regulation: ± 2.5%
  • Operating temperature: -40 ℃ to +85 ℃
  • Size: 43 * 30 * 14 mm

LM2596 2A Buck Step-down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter

₹400.00
  • Input Voltage: 4 - 40V DC
  • Output Voltage: 1.3 - 37V DC
  • Output Current: 2A Rated, (3A maximum with heat sink).
  • Switching Frequency: 150 kHz.
  • Input reverse polarity protection.
  • Built-in output short protection function.
  • Voltmeter Resolution: ±0.1V
  • Voltmeter Digital Display Range: 0v-45v
  • High precision multi-turn potentiometer to set to the desired value
  • Led Digital Voltmeter Tube, The Accuracy Is Adjustable Function, Can Be Aimed At Your Multimeter Adjustable Accurate.
  • Press the key "S1" to let the display show the input or output voltage. when the green led light, it shows output, the red shows the input.
  • Size :65*35mm

DP50V5A Constant Voltage current Step-down Programmable Power Supply Module

₹4,200.00 inc. GST
• Model: DP50V5A. • Input voltage range: 6V to 55 V. • Output voltage range: 0.00 to 50 V. • Output current: 0.000-5.000A. • Output power range: 00.00-250.0W. • Open size: 71mm x 39mm. • Output voltage resolution: 0.01V. • Output current resolution: 0.001A. • Output Voltage accuracy: ± (0.5% + 1 digits). • Output Current accuracy: ± (0.5% + 2 digit). • Dimension: 79 x 43 x 48mm • Weight: 78g.

DPS3003 Constant Voltage Current Step-down Programmable Power Supply Module

₹3,200.00 inc. GST
  • Input voltage range: 6V to 40V
  • Output voltage range: 0V to 32V
  • Output current: 0 to 3.000A.
  • Output power range: 0-96W.
  • Open size: 71mm*39mm.
  • Output voltage resolution: 0.01V.
  • Output current resolution: 0.001A.
  • Output Voltage accuracy: ± (0.5% + 1 digits)
  • Output Current accuracy: ± (0.5% + 2 digit)
  • Dimension: 79*43*41mm
  • Weight: about 90g.

Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter

₹500.00 inc. GST
  • Input voltage: DC 4.5 ~ 40V.
  • Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
  • Output current: 2A.
  • The voltmeter has an automatic calibration function.
  • With reverse connection protection.
  • With overheat protection and short circuit protection.
  • The voltmeter has an automatic calibration function.
  • With reverse connection protection.
  • With overheat protection and short circuit protection.
  • High efficiency and low ripple.
  • With USB power indicator light.

XL4015 5A STEP DOWN WITH HEAT SINK

₹250.00 inc. GST
  • Module nature: non-isolated buck module ( BUCK )
  • Input voltage: 4-38V
  • Output voltage: 1.25-36V
  • Output current: 0-5A, it is recommended to use within 4.5A
  • 14 Digital I/O Pins
  • Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
  • Working temperature: -40 degree + 85 degrees
  • Working frequency: 180KHz
  • Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
  • Voltage adjustment rate: S ( u ) ≤ 0.8%
  • Power indicator
  • Short circuit protection
  • Over-temperature protection
  • Dimension: 54mm * 23mm wide *18mm