Showing all 2 results

Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

300.00 inc. GST
ESP8285 M2 WiFi IoT Module :
  • SOC characteristics.
  • Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS.
  • Built-in TCP/IP protocol.
  • Built-in one-channel 10-bit high precision ADC.
  • Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO.
  • The deep sleep current is 10uA, the cut-off current is smaller than 5uA.
  • Wake, connect and transmit data package within 2ms.
  • The consumer power is smaller 1.0Mw (DTIM3) when at standby status.
  • Built-in 1M byte for SPI Flash.
  • Ultra-small size.
  • Support serial to WiFi.
  • Wireless transparent transmission.
  • Long-distance transmission with ultra-low power.
  • Support outboard antenna.
  • Bearing high temperature to 125 °C, compared to the 85°C for ESP8266.
WiFi characteristics.
  • Support 802.11 b/g/n/e/I.
  • Support Station, Soft AP, Soft AP+STA mode.
  • Support WiFi Direct (P2P).
  • Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration.
  • P2P finding, P2P GO mode/ GC mode and P2P power management.
  • WPA/PA2PSK and WPS.
  • 11securitycertification: pre-certification and TSN.
  • Support 802.11n (2.4GHz).
  • 1h/RFC1042 frame encapsulation.
  • Support seamless roaming.
  • Support AT remote update and cloud update (OTA).
  • Support Smart Config function (including Android and Ios device

Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module Fully Compatible With ESP8266

300.00 inc. GST
  • Model: ESP8285 ESP-M3
  • 32-bit Tensilica L106 microcontroller
  • Ultra-low 16 bit RISC
  • Fully Compatible with ESP8266
  • Embedded TCP protocol
  • channel high-precision 10-bit ADC
  • Supporting the most commonly used networks (802.11 b / g / n)
  • Support WPA, PA2PSK and WPS
  • Working temperature: -40 ℃ - + 125 ℃
  • Clock Speed: 80 MHz; (max 160 MHz)
  • Flash memory: 1 MB
  • Interface: HSPI, UART, I2C, I2S, Remote Control IR Control, PWM, GPIO
  • Direct WiFi Support (P2P)
  • Support mode: CCMP, TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc
  • Low consumption
  • Easy access to the pins