74HC32 Quad 2-Input OR Gate IC
74C926 4-Digit Counter IC
- 4-Digit Counter With Multiplexed 7-Segment Output Drivers
- High-level input voltage: 2V
- Low-level input voltage: 0.8V
- High-level output voltage: 2.4V
- Low-level output voltage: 0.4V
- Output source current: -2mA
- Maximum clock frequency: 4MHz
- Input capacitance: 5pF
- Supply voltage range: 3V to 6V
- Package: DIP-18
74LS169 Synchronous 4-Bit Up Down Binary Counter IC
- No. of Bits: 4
- Typical Operating Voltage: 5V
- Output type: CMOS
- Operating Voltage Range: 4.5V to 5.5V
- Output current when high: -0.4mA
- Output current when low: 8mA
- CKB and CKA input clock frequency: 32MHz and 16MHz resp.
- CKA and CKB pulse width: 15nS and 30nS resp.
- Programmable Look-Ahead Up/Down Binary Counter
- Fully Synchronous Operation
- Internal Look-Ahead
- Carry Output for Cascading
- Standard TTL Switching Voltages
- Available in 14-pin PDIP, GDIP, PDSO packages
80C31 Microcontroller IC
- 8051 Central Processing Unit
- Memory addressing capability
- Power control modes:
- CMOS and TTL compatible
- Three speed ranges at VCC = 5V
- Three package styles
- Extended temperature ranges
- Dual Data Pointers
- Second DPTR register
- Security bits:
- Encryption array—64 bytes
- 4 level priority interrupt
- 6 interrupt sources
- Four 8-bit I/O ports
- Full–duplex enhanced UART
- Programmable clock out
- Asynchronous port reset
- Low EMI (inhibit ALE)
- Wake-up from Power Down by an external interrupt (8XC51)
LNK304PN Off-line Switcher IC
- Drain Voltage: -0.3 V to 700 V
- Peak Drain Current: 400 mA
- Feedback Voltage: -0.3 V to 9 V
- Feedback Current: 100 mA
- Operating Junction Temperature: -40 °C to 150 °
- Lowest Component Count, Energy-Efficient Off-Line Switcher IC
- Lowest cost and component count buck converter solution
- Fully integrated auto-restart for short-circuit and open loop fault protection – saves external component costs
- 66 kHz operation with accurate current limit – allows low cost off-the-shelf 1 mH inductor for up to 120 mA output current
ICL8038CCPD Precision Waveform Generator or Voltage Controlled Oscillator IC
- Precision Waveform Generator or Voltage Controlled Oscillator
- Power Supply Type: Single/Dual
- Supply Voltage Range (Single): 10V to 30V
- Supply Voltage Range(Dual): ±5V to ±15V
- Output Sink Current: 25mA
- Frequency of Oscillation Max.: 100kHz
- Supply Current Max.: 20mA
- Duty Cycle: 2% to 98%
- FM Linearity:0.5%
- Rise Time: 180ns
- Fall Time: 40ns
- Package: DIP-16
74LS321 Crystal-Controlled Oscillator IC
PT2253 Electronic Volume Controller IC
-
CMOS Technology
-
Low Power Consumption
-
Operating Voltage Range : Vcc = 6 ~ 12 V (Backup Voltage is up to 4 V)
-
0dB to -68dB attenuation controlled by 2dB/step
-
2 Channels in each chip
-
Capable to control attenuation by a built-in oscillator and Up/Down Pin
-
Single Power Supply or Dual Power Supplies of (+) and (-) can be used
-
Wide Frequency Response Range
-
Very Low Harmonic Distortion
-
Available in 16 pins, DIP Package
LM723 Precision Voltage Regulator IC
74LS42 BCD to Decimal Decoder IC
74LS374 Edge-Triggered D Flip-Flop IC
74LS161 4-Bit Binary Counter IC
- 4-Bit Binary Counter
- Supply Voltage Range: 4.75V to 5.25V
- Supply Current Max.: 32mA
- Clock Frequency Max.: 32MHz
- HIGH Level Input Voltage Min.: 2V
- LOW Level Input Voltage Max.: 0.8V
- HIGH Level Output Voltage Min.: 2.7V
- LOW Level Output Voltage Max.: 0.5V
- High level Output Current Max.: -0.4mA
- Low level Output Current Max.: 8mA
- Input Clamp Voltage Max.: -1.5V
- Propagation Delay Time Max.: 35ns
- Package: DIP-16