CD4017 Decade Counter With 10 Decoded Outputs IC
- Decade Counter With 10 Decoded Outputs
- Supply Voltage: 3 to 20V
- Input Current: ±10mA
- High level Output Voltage Min.: 4.95V
- Low level Output Voltage: 0.05V
- High level Input Voltage Min.: 3.5V
- Low level Input Voltage Max.: 1.5V
- Power Dissipation: 200mW
- Propagation Delay Time Max.: 650ns
- Package: DIP-16
- High noise immunity 0.45 VDD (typ.)
- Low power Fan out of 2 driving 74L
- TTL compatibility or 1 driving 74LS
- Medium speed operation 5.0 MHz (typ.)with 10V VDD
- Low power 10 mW (typ.)
- Fully static operation
LM337 3-Terminal 1.5A Negative Adjustable Regulator IC
CD40106 Hex Inverting Schmitt Trigger IC
- Hex Inverting Schmitt Trigger
- Supply Voltage Range: 3 to 15V
- Number Of Circuits: 6
- Quiescent Current Max.: 4µA
- Low level Output Current: 3.4mA
- High level Output Current: 3.4Ma
- Positive Going Input Voltage Max.: 3.5V
- Negative Going Input Voltage Max.: 3V
- Propagation Delay Time Max.: 180ns
- Package: DIP-14
CD4002 Dual 4-Input NOR Gate IC
- Dual 4-Input NOR Gate
- Supply Voltage Range: 3 to 15V
- Power Dissipation: 200mW
- Low level Output Voltage Max.: 0.05V
- High level Output Voltage Min.: 4.95V
- Low level Input Voltage Max.: 1.5V
- High level Input Voltage Min.: 3.5V
- Propagation Delay Time Max.: 250ns
- Output Drive Current: -3.2mA
- Package: DIP-14
74LS163 Synchronous 4-Bit Binary Counter IC
UM93214A 1-memory Tone Pulse Dialer IC
- 1-memory Tone/Pulse Dialer
- Low standby current
- 3.58MHz crystal or ceramic resonator
- Calibrated DTMF timing for redialing
- Memory retention voltage Max: 5V
- Operation Current(Pulse): 0.2mA
- Operation Current(Tone): 0.6mA
- Memory retention current: 0.1µA
- System Frequency: 3.58MHz
- Pause Time: 2.2s
- Operating Voltage: 2.0V – 5.5V
- Operating Temperature Range: -200C to +750C
- Package: DIP-16
PIC16F84A Microcontroller IC
- Maximum CPU Frequency: 20 MHz
- Architecture: 8 bit
- Program Memory (Flash): 1.75 kB
- RAM: 68 byte
- Internal Oscillator: No
- ADC: No
- of Pins: 18
- Voltage: 2V - 6V
- 10,000 erase/write cycles Enhanced FLASH Program memory typical
- 10,000,000 typical erase/write cycles EEPROM Data memory typical
- EEPROM Data Retention > 40 years
- In-Circuit Serial Programming™ (ICSP™) - via two pins
- Power-on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST)
- Watchdog Timer (WDT) with its own On-Chip RC Oscillator for reliable operation
- Code protection
- Power saving SLEEP mode
- Selectable oscillator options
- Low power, high speed technology
- Fully static design
- Wide operating voltage range:
- Low power consumption:
74LS251 Data Selector or Multiplexer IC With 3-State Output
LM311 Voltage Comparator IC
LM324N Quad Operational Amplifier IC
MOQ: 2 nos
- Low Power Quad Operational Amplifier
- Input Offset Voltage (max): 7mV
- Input Offset Current (max): 50nA
- Input Bias Current (max): 250nA
- Operating temperature (max): 700C
- Output Current (max): 2mA
- CMRR (min): 65dB
- Eliminates Need for Dual Supplies
- Four Internally Compensated Op Amps in a Single Package
- Allows Direct Sensing Near GND and VOUT also Goes to GND
- Compatible With All Forms of Logic
- Power Drain Suitable for Battery Operation
- In the Linear Mode the Input Common-Mode, Voltage Range Includes Ground and the Output Voltage
- Can Swing to Ground, Even Though Operated from Only a Single Power Supply Voltage
- Unity Gain Cross Frequency is Temperature Compensated
- Input Bias Current is Also Temperature Compensated
74LS595 8-Bit Shift Register IC
74LS299 8-Bit Universal Shift Storage Register IC
- 8-Bit Universal Shift/Storage Register
- High-level input voltage: 2V
- Low-level input voltage: 0.8V
- High-level output voltage: 3.4V
- Low-level output voltage: 0.5V
- Maximum clock frequency: 70MHz
- Propagation delay time max: 24ns
- Power Dissipation: 700mW
- Supply voltage range: 4.75 to 5.25V
- Multiplexed Input/Outputs for Data Hold, Shift Right, Shift Left, and Load Data
- Operates with Outputs Enabled or at High impedance
- Common I/O for Reduced Pin Count
- Four Operation Modes: Shift Left, Shift Right, Load and Store
- Separate Shift Right Serial Input and Shift Left Serial Input for Easy Cascading
- 3-State Outputs Drive Bus Lines Directly
- Can be Cascaded for N-Bit Word Lengths
- Standard TTL Switching Voltages
- Package: DIP-20