IR Transmitter
IR LED Blue 5mm
IR LED 3mm
MOQ : 2 NOS
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
IR LED 5mm
MOQ : 5NOS
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
IR Obstacle Avoidance Proximity Sensor Module
IR-08H Infrared Obstacle Avoidance Sensor Module
- Infra-Red IR Emission Receiver IR-08H for Arduino
- Onboard with HS0038B HS38B IR receiver
- Operating Voltage: 3V – 5.5V
- Detection range : 2cm – 40cm
- Output level: Low logic level when an obstacle is detected
- Working current: 20mAh
- Working temperature: -10’C~+50’C
- IO interface: 4 line (-/+/S/EN)
- Output signal: TTL Level
- Adjusting mode: Multi resistance regulation
- Effective angle: 35°
- Size: 4.5 * 1.1cm(approx)
- Easy to assemble and use
- On-board detection indication
- Pin Connection to the board: 4 pins
- A pre-set knob to fine-tune distance range
IR Proximity Module using TSOP
- Operating wavelength: Near-infrared region 700 nm to 1400 nm
- Main Chip: LM358
- Operating Voltage Range: 3.6V-5V DC
- Average Current Consumption: 06mA
- Distance Measuring Range: 2 to 30cm
- Detection angle: 35 °
- Easy to assemble and use
- On-board detection indication
- the effective distance range of 2cm to 80cm
- A pre-set knob to fine-tune distance range
- If there is an obstacle, the indicator lights on the circuit board
- 3mm screw holes for easy mounting
- Dimensions: 48 x 14 x 8mm
- Weight:5gm
LTH 1550-01 IR Transmitter Reciever module
- Type: reflective.
- Fast switching speed
- Pin count :4
- Reverse Voltage: 5 V
- Sensing Distance: 3.81 mm
- Maximum collector-emitter voltage: 30V
- Operating Temperature: -25 ° C to +85 ° C
- Maximum forward current: 1A
- Dimensions: 8.7mm (L) x 4.5mm (W) x 5.6mm (H)
- Maximum emitter-collector voltage: 5V
- Maximum power dissipation for input diode: 90mW
- Maximum collector current: 20mA
- Maximum power dissipation for output phototransistor: 100mW
- Non-contact switching
- For direct PC board or dual-in-line socket mounting
IR Infrared Obstacle (Imported)
- Operating wavelength: Near-infrared region 700 nm to 1400 nm
- Main Chip: LM358
- Operating Voltage Range: 3.6V-5V DC
- Average Current Consumption: 06mA
- Distance Measuring Range: 2 to 30cm
- Detection angle: 35 °
- Easy to assemble and use
- On-board detection indication
- the effective distance range of 2cm to 80cm
- A pre-set knob to fine-tune distance range
- If there is an obstacle, the indicator lights on the circuit board
- 3mm screw holes for easy mounting
- Dimensions: 48 x 14 x 8mm
- Weight:5gm
Single Beam 15 m Photoelectric Active Infrared Intrude Detector IR Sensor Tamper Alarm
- Working Voltage: 12V, 24V
- Working Current: 50MA
- Infrared Frequency: 1.92khz
- Wavelength:940nm
- With rain-proof design
- Operating temperature: --20 degrees to 50degrees
- Relay output : 1 a max *36 v
- Response time(Relay output) <10 ms,
- Hold time(Relay output) 300ms
- Range can be reduced to 30% in bad weather conditions: for rain , dust , etc
- Unique digital filter circuit design, strong anti false alarm ability
- With high levels of anti-RFI/EMI capability
- Fully sealed design, rain-proof(fog),dust-proof(worm),suitable for hostile environment
- Used with kinds of alarm panel and access control system.
- Detector Range: indoor 20m. Outdoor 10m, Detection mode Presence(beam interruption)
- Size : 49.2 x 76 x 21.6MM,
Infrared Ir Obstacle Avoidance Detector Sensor Module Adjustable 2-180cm
- Power requirements: 5 VDC
- Communication: Digital High/Low Output
- A variety of welding methods, vertical and horizontal, to expand the scope of application
- Add precision potentiometer to adjust infrared 38KHz detection range
- Sensor detection with enabling the port, convenient signal line as bus application line
- Power-on enable port default level, the sensor enables the detection output signal
- Detection range up to 1.2 meters
- Software enhancement, setting can avoid infrared light interference of the same module or other kinds of infrared remote control devices
- Working condition of each module recorded with EEPROM, reduce the probability of mutual interference of the same paragraph to 1%
- Signal low output
- Pin SIP header, applied in breadboard or through-hole project
- On-board set jumper JP, the signal output has a latch function when shorted, otherwise, it is jog output
- Operating temperature: 32 to 158 ° F (0 to +70 ° C)
- Size: 2.4cm × 2.8cm
GP2Y0A41SK0F 4-30cm
- Model: GP2Y0A41SK0F
- Operating Voltage Range: 4.5~5.5V
- Average current consumption: 30 mA
- Distance measuring range: 4 cm to 30 cm
- Output type: Analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms
- Screw Holes: 37mm apart, 3 mm in diameter
- Connecting cable length:15cm
- Very Small in size
- Less influence on the colour of reflected objects, reflectivity
- Analogue voltage corresponding to the voltage
- External control circuit unnecessary
- Low cost
- The sampling rate of nearly 25 readings per second
- Dimension: 29.5×13×21.6 mm
- Weight: 3.5 gm