Showing 1–12 of 17 results

37 IN 1 Sensor Kit For Arduino

₹2,200.00 inc. GST
  • For beginners who are interested in Arduino
  • A complete set of Arduino’s most common and useful electronic components
  • Infrared sensor receiving module
  • Laser sensor module
  • Temperature and humidity sensor module
  • Infrared sensor module
  • 5v relay module
  • Obstacle avoidance sensor module. For beginners who are interested in Arduino
  • A complete set of Arduino’s most common and useful electronic components
  • Packaging Type: Box
  • Material: Circuit board
  • Dimensions: 98  x 0.59 x 0.24 inch
  • Weight: 428 g

4-axis Flight Control Sensor HMC5883L BMP085 MWC GY-651

  • Model: GY-651
  • Use the chip: HMC5883L + BMP085
  • Power supply:3-5v (internal low dropout regulator)
  • Size: 13.5mm * 15.8mm (pin spacing standard 2.54mm)
  • Communication modes: standard IIC communication protocol
  • Magnetic field range: ± 1.3 to ± 8.1 gauss
  • Pressure range: 300-1100hPa
  • Chip 12bit AD converter, 16-bit data output Machine welding process to ensure quality
  • Size: 18mmx14mm

BMP 180 Digital Barometric Pressure Sensor

₹275.00 inc. GST
  • 8V to 3.6V Supply Voltage
  • Low power consumption – 0.5uA at 1Hz
  • Logic: 3 to 5V compliant
  • I2C interface
  • Max I2C Speed: 3.5Mhz
  • Very low noise – up to 0.02hPa (17cm)
  • Fully calibrated
  • Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
  • Up to 0.03hPa / 0.25m resolution
  • Small and easy to use.

BMP280 Pressure Sensor module High Precision Arduino

₹250.00 inc. GST
  • Chip:BMP280
  • Operating Voltage: 1.71V to 3.6V
  • Communication method: Standard IIC/SPI communication protocol
  • Pin pitch: 2.54mm
  • Operating Temperature: -40 to +85 deg. Celsius
  • Operating Pressure: 300 hPa to 1100 hPa
  • Peak current: 1.12mA
  • Current consumption: 2.7µA @ 1 Hz sampling rate
  • Accuracy between( 700 to 900hPa and 25 to 40 deg. C): ±0.12hPa and ±1.0m
  • Package 8-pin LGA metal-lid
  • Relative accuracy(950 … 1050hPa @25°C): ±0.12 hPa, equiv. to ±1 m
  • RoHS compliant, halogen-fre
  • Module size: 11.5mm*15mm

GP2Y1010AU0F Optical Dust Sensor

₹400.00 inc. GST
  • Operating Voltage: 4.5V to 5.5V
  • Low Current Consumption: 20mA max
  • Sensitivity: 0.5V/(0.1mg/m3)
  • Clean-air voltage: 0.9V typical
  • Storage temperature:-20 ~80 degrees Celsius
  • Minimum Detectable Dust Size: 0.5µm
  • Smallest particles detected value: 0.8 micron
  • Dust Density Sensing Range: Up to 580 µg/m3
  • Sensing Time: Less than 1 Second
  • Service life: 5 years
  • The presence of dust can be detected by the photometry of only one pulse
  • Enable to distinguish smoke from house dust
  • Lead-free and RoHS directive compliant
  • Operating temperature:-10 -65 degrees Celsius
  • Dimensions: 46.0 x 30.0 x 17.6 mm
  • Weight: 15gm

GSR Sensor for Grove

₹1,399.00 inc. GST
  • Operating voltage:3.3V/5V
  • Sensitivity: Adjustable via a potentiometer
  • Input Signal: Resistance, NOT Conductivity
  • Output Signal: Voltage, analogue reading
  • Finger contact material: Nickel
  • Detects conductance of the skin
  • Finger Straps for electrodes

Induction Cooker Sensor

₹30.00 inc. GST
  • Product Name: Induction Cooker Temperature Sensor
  • Top Size : 28 x 18mm
  • Cable Length : 12cm
  • Total Length : 15cm
  • Materials: Metal, Plastic, Rubber
  • Main Color: Black, Red
  • Weight: 5g

MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module

₹200.00 inc. GST
  • Input voltage: DC 5V
  • Power: 150mA
  • DO output: TTL digital 0 and 1 (0.1 and 5V)
  • AO output: 0.1-0.3V (relatively clean), the highest concentration voltage is about 4V.
  • Suitable for home or factory gas leakage monitoring devices.
  • Have better sensitivity to Carbon Monoxide, Methane and LPG Gas.
  • High quality dual-panel design, with power indicator and TTL signal output instructions.
  • DO switching signal (TTL) output and AO analog signal output.
  • TTL output valid signal is low. (When the output low signal is on, it can be directly connected micro-controller or relay module.)
  • Analog output voltage: the higher concentration, the higher voltage.
  • Four screw holes, easy positioning.
  • Long life and stability, quick response and resume.

MQ4 Sensor

₹150.00 inc. GST
  • Power requirements: VCC - 5V±0.1
  • DO output: TTL digital 0 and 1 (0.1 and 5V)
  • AO output: 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
  • Detection Gas: Natural gas/Methane
  • Detection Concentration: 200-10000ppm (Natural gas / Methane)
  • Interface: 1 TTL compatible input (HSW), 1 TTL compatible output (ALR)
  • Heater consumption: less than 750mw
  • Operating temperature: 14 to 122 °F (-10 to 50°C)
  •  Related humidity less than 95%Rh
  • Load resistance: 20KΩ
  • Sensing Resistance: 10KΩ- 60KΩ (1000ppm CH4)
  • Preheat time: Over 24 hour
  • Standard Encapsulation Bakelite, Metal cap

MQ5 Module

₹175.00 inc. GST
  • Operating voltage: 5V
  • Interface Type: Analog & Digital
  • Dual signal output (analogue output, and TTL level output)
  • Detecting concentration:200-10000ppm
  • The TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller
  • High Sensitivity to LPG, Natural Gas, Town Gas
  • small sensitivity to smoke & alcohol
  • Low Cost.
  • Stable & Long Life.
  • Simple drive circuit.
  • Fast response. 
  • Onboard Power indication.
  • Adjustable sensitivity
  • Dimension: 32mm x 22m x 27mm

MQ5 SENSOR

₹150.00 inc. GST
  • Power requirements: VCC - 5V±0.1
  • DO output: TTL digital 0 and 1 (0.1 and 5V)
  • AO output: 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
  • Detection Gas: LPG, natural gas, town gas
  • Detection Concentration: 300-10000ppm
  • Heating voltage: 5V±0.1
  •  Load resistance: 20KΩ
  •  Heater resistance: 31±10%
  •  Heating consumption: less than 800mw
  • Operating temperature:-10 to 50°C
  • Related humidity less than 95%Rh
  • Sensing Resistance: 10KΩ- 60KΩ (1000ppm CH4)
  • Preheat time: Over 24 hour