I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-13%
Lipo Battery Charger B3
Original price was: ₹950.00.₹700.00Current price is: ₹700.00. inc. GST
Solar Charge Controller 12v/24v 40A
Original price was: ₹1,500.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
12V / 2A Battery Charger
Original price was: ₹750.00.₹650.00Current price is: ₹650.00. inc. GST
- This is a durable product with a 6-month warranty.
- The adapter is easy to use.
- It comes with a long wire.
- Wide input voltage range (100VAC-280VAC).
- Very low no-load power consumption.
- Very low ripple & noise output for device safety.
- Protections against- under-over voltage/ overload/ short circuit with auto-restart on fault removal.
- Thermal shut down (140°C) with auto-restart on cold condition.
- Soft start & low inrush current.
- Isolation up to 3kv for 5sec.time period.
- High operating ambient temperature up to 60°C.
- Highly efficient, compact, durable and long life.
Description
This 12V 2A Power Supply with 5.5mm DC Plug Adaptor has a 1.1 metre long connection cable and a 2 pin EU plug style adapter. These adapters are made to fulfil the power needs of tablet computers, laptop computers, and other electronic devices. These adapters are designed to meet the power requirements of tablets, laptops, and other electronic devices. Because it can transport up to 2A current, this adapter is appropriate for toy cars, CCTV cameras, routers, modems, cordless phones, set-top boxes, wireless devices, and POS machines.
DC 12V/2A denotes a direct current input voltage of 12 volts for charging the battery. The recommended amount of amperage to recharge the battery is 2A. This isn’t to say that a transformer with a lower amperage won’t charge it; it simply takes a long time.
Reviews (0)
Shipping & Delivery
Related products
30AMPS ESC DYS
- Input Voltage: 11.1 ~ 11.7 V.
- Constant Current: 30A (Max 40A<10s).
- BEC: 5V/3A.
- Li-Po battery: 2S ~ 3S.
- Ni-MH 4-10 CELLS Auto Detect.
- Separately voltage regulator IC for the microprocessor, providing good anti-jamming capability.
- Used with SimonK updated firmware for Multicopter
- Battery side – Male deans (T) connector.
- Motor side – Female 3.5mm gold connector.
- 30A ESC for BLDC has onboard BEC.
- Developed specifically for multi-rotor use
- Smooth, linear, and precise throttle response
- Extreme low output resistance, super current endurance
- Auto Low Battery Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo.
- Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
- Dimension: 46* 26 * 11mm
- Weight: 23g
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
Dual USB 5V 1A 2.1A Mobile Power Bank Battery Charger
- Micro USB input: 5V 1A
- Charging voltage input: 5V-6V 1A.
- Step-up voltage output: 5V 1A/2.1A (Dual output, Total 2.5A).
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650)
- Best for Arduino, DIY Kits, Power bank, etc.
- Protection circuit: Overcharge protection: 4.250V Overcharge protection release: 4.100V.
- Protection circuit: Over-discharge protection: 2.900V Over-discharge protection release: 3.000V.
- Idle time before LCD switch off 60secs.
- Screen size:27mm x 17mm
- Dimension: 57mm x 28mm
IMAX B6 DIGITAL RC LIPO NiMH BATTERY BALANCE CHARGER
- Input Voltage: 11V to 18V
- Battery Voltage: 2V to 20V
- Power Max Charge: 50W – Max
- Discharge: 5W
- Charge Current Range: 0.1 to 5.0A
- Discharge Current Range: 0.1~1.0A NiMH/NiCd Cells, 1~15A LiIon/LiPoly Cells, 1~6A Pb
- Microprocessor controlled
- LiIon, LiPoly, and LiFe are capable
- NiCad and NiMH are capable
- Large range of charge currents
- Storage charge function
- Time limit function
- Delta-peak sensitivity
- Individual cell balancing
- Battery break in and cycling.
- Input voltage monitoring (Protects car batteries at the field)
- Data storage (Store up to 5 packs in its memory
- Dimensions: 133x87x33m
- Weight 277g
Lipo Battery Charger B3
- Input voltage: AC 110V-240V, 50~60Hz
- Charge Current: 1.2A Max
- Cell Cut Off Voltage: 4.2V ± 0.02V
- Circuit Power: 11W ± 10%
- Balance charge current: 850mA
- Display: Green & Red LED
- Built-in power supply
- Case: Plastic
- Max charge power: 10W
- Only charge for 2~3 series LiPo battery
- Automatic charge start
- Simple, reliable, and safe to use
- Dimensions: 88x57x35mm
- Weight:103gm
Reviews
There are no reviews yet.