I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-9%
33nf 2000V DC Polyester Capacitor
Original price was: ₹20.00.₹15.00Current price is: ₹15.00. inc. GST
CD4026 CMOS Decade Counter with Decoded 7-Segment Display Outputs
Original price was: ₹35.00.₹30.00Current price is: ₹30.00. inc. GST
1KOhm ¼ Watt Carbon Film Resistor
Original price was: ₹11.00.₹10.00Current price is: ₹10.00. inc. GST
MOQ :10 NOS
- 1KΩ
- ¼ Watt
- 5% tolerance
- RoHS Compliant / Lead free
Description
A carbon Film Resistor is a resistive element made out of a thin carbon film on a non-conducting material. Axial resistors of this sort are one of the most common. Tolerance, stability, and TCR are all strengths of carbon film resistors. Furthermore, owing to the low voltage coefficient, the resistors have low noise qualities and a good linearity function. As a result, metal film resistors are frequently recommended in circuits where tight tolerance, low-temperature coefficient, and low noise qualities are important. They may be used in a variety of ways, such as active filters or bridge circuits.
The 1 KOhm 1/4 Watt Carbon Film Resistor is a fixed resistor that employs carbon film to confine electrical current to a specific threshold. Resistors of this type are commonly used in electrical circuits. Carbon film resistors are commonly used in high-voltage and high-temperature applications. With a nominal temperature of 350°C, operating temperatures can go up to 15kV. High-voltage power supply, radar, x-rays, and lasers are all examples.
Carbon Fim Resistor is made by depositing a carbon film over a ceramic substrate that serves as an insulator. The carbon coating also blocks electrical current to a certain extent. The insulating ceramic, on the other hand, does not allow heat to pass through, allowing the carbon film resistor to survive high temperatures without being destroyed. Meanwhile, carbon film resistors with tolerance values ranging from 1 ohm to 1 megaohm have an honest tolerance value.
Reviews (0)
Shipping & Delivery
Related products
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
Reviews
There are no reviews yet.