I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2SK2541 N-Channel Mosfet Transistor 50V 0.1A
₹16.00 inc. GST
MOQ: 2 nos
- N-Channel Mosfet
- Drain Current: 0.1A
- Drain Source Voltage: 50V
- Static Drain Source On Resistance: < 50Ω
- Total Power Dissipation: 250mW
- Package: TO-92
These N-Channel enhancement mode power field-effect transistors designed based on Semiconductor’s proprietary, high cell density, DMOS technology. This advanced technology specially tailored to reduce minimize on-state resistance while providing rugged, reliable, and fast switching performance. These devices are compatible for applications requiring up to 0.1A DC and can deliver pulsed currents up to 2 A. 2SK2541 manufactured in TO-92 package that is universally accepted for all commercial-industrial applications.
2SK2541 provides a Drain Source Voltage 50V at a drain current 0.1A. These MOSFET Transistors designed explicitly to achieve extremely low-voltage, low-current applications. This feature makes this device ideal for use as a Power MOSFET Gate Drivers and Switching Application. By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability these parts adopted quickly into new and existing offline power supply designs.
A MOSFET designed as a special type of metal–oxide–semiconductor field-effect transistor (MOSFET) explicitly to handle significant power levels. This N-Channel MOSFET defined as a type of MOSFET in which the channel of the MOSFET made up of a majority of electrons as current carriers. When the MOSFET activated and is on, the majority of the current flowing are electrons moving through the channel. It is one of the prominent power semiconductor device in world, due to its low gate drive power, wide bandwidth. This makes it ideal for use in wide range of applications such as in low-voltage (less than 200V) switch.
Applications
- Small Servo Motor Control
- Power MOSFET Gate Drivers
- Assorted Switching Application
- Switching High voltage loads
- Commonly used for small signal switching
- LED dimmers or flashers
- Low power Analog converters or inverters

Related products
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
AP Extension pigtail SMA female socket jack to UFL IPX Connector
GSM Antenna
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
SIM Card Holder
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.

Reviews
There are no reviews yet.