I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
330pf 2kv Disc Capacitor
₹15.00 inc. GST
MOQ: 5 nos
- Capacitor type: Ceramic Capacitor
- Value: 330pF
- Voltage: 2kV
- Package: Through Hole
- Pitch: 5 mm
- Polarity: Non-Polarised
- Linearity: Nearly Linear
- Does not vary much with Temperature
This 330pf Disc Capacitor designed as a non-polarized, linear disc-shaped capacitor. This ceramic Disc Capacitor widely used for power decoupling, having smooth power in your circuit, timing circuits, etc. A Ceramic Disc Capacitor defined as a fixed value Disc Capacitor in which ceramic material itself acts as the dielectric. This capacitor made up of ceramic two or more alternating layers and a metal layer acting as the electrodes.
Ceramic disc capacitors generally used as safety capacitors in electromagnetic interference suppression applications. In addition, these large ceramic power capacitors also used for high voltage or high-frequency transmitter applications. The ceramic capacitor is basically a non-polarity device, which indicates that it does no have polarities. As a result, can be connected in any direction. Ceramic capacitors also used as general-purpose capacitor, because of their non-polarity and are available in a large variety of capacitances, voltage ratings, and sizes.
Applications of Ceramic Capacitors
- Resonant circuit in transmitter stations.
- High voltage laser power supplies, power circuit breakers, induction furnaces, etc.
- Printed circuit boards and high-density applications.
- Used in brush DC motors to minimize RF noise.

Related products
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
SIM Card Holder
XT60 Connector
- Manufacturer: AMASS
- Connector Series: XT60H
- Rated Voltage: DC 500V
- Metal Material: Brass Gold Plated
- Rated Current: 30A
- Momentary Current: 60A
- Number of pins: 2
- Colour: Yellow
- Contact Resistance: 0.55mΩ
- FR Level: UL94 V0
- Use Times: 1000 TIMES
- Temperature: -20℃ to 120℃
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash

Reviews
There are no reviews yet.