I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-8%
T8 Trapezoidal Lead Screw 8MM Thread 2MM Pitch 300MM Length with Brass Nut
Original price was: ₹800.00.₹720.00Current price is: ₹720.00. inc. GST
Aluminium Flexible Coupling Coupler Helical Shaft (5 x 5 mm)
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
3D printer 128×64 Smart LCD controller for ramps 1.4
Original price was: ₹1,200.00.₹1,100.00Current price is: ₹1,100.00. inc. GST
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
Description
The 3D printer 128×64 Smart LCD controller for ramps 1.4 designed with an SD-Card reader, a rotary encoder, and a 128×64 LCD display. This 128×64 LCD Display can be easily connect it to your RAMPS board using the “smart adapter”. After connecting this controller panel to your RAMPS, there is no need to use pc anymore. The 2004 LCD Smart Controller supplies power for your SD card. Moreover, all functions like calibration, axes movements performed by just using the rotary encoder on the Smart Controller. Thus the 3D designs printed without PC, just with a g-code design stored on the SD card.
This LCD display is of 128×64 pixel. Using the “smart adapter” included in the module, it can be easily connected to the Ramps board. It provides a simple and cost-effective solution for adding a light blue background with 128×64 monochrome dark blue pixels, into your project. And also display has a very clear and high contrast white text upon a blue background/backlight. Moreover, comparing with the 2004 Smart LCD Controller with Adapter, this 128×64 screen can display much more information, which would help you run the 3D printer without a computer.
In this LCD controller, we can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes. And also the SD card base on the back puts the slicing file into the SD card and selects the file on the LCD, thus printing can be processed.
Reviews (0)
Shipping & Delivery
Related products
3.2 Inch Touch Screen
- Version: V4.0
- Resistive touch.
- Dimension: 3.2 inch.
- Operating Voltage: DC 5V.
- Driver: XPT2046.
- Resolution: 240 x 320.
- Compatible with any version of the raspberry pie
- Drivers provided (works with your own Raspbian/Ubuntu/Kali)
- Supports FBCP software driver as well, allows to config software resolution and set up dual-display
- Comes with three buttons for easy application
- Play videos (supports multi formats, MP4, and so on)
- Take photos by touching
- Support software keyboard (system interaction without keyboard/mouse)
- The Raspbian system, have the following features:1. Take pictures (17 kinds of camera mode) 2. Support soft keyboard (from the mouse and keyboard can control the system) 3. Surfing the Internet
- Dimension: 10 x 8 x 4 cm
- Weight: 150 Grams
3.5” TFT for Raspberry Pi
- Operating Voltage: DC 5V.
- Touch Screen Controller: XPT2046
- Resistive touch.
- Dimension: 3.5 inch
- Resolution: 320×480 pixel
- Colors:65536
- Backlight: LED
- LCD Type: TFT
- LCD Interface: SPI
- Compatible with any version of the raspberry pie
- Drivers provided (works with your own Raspbian/Ubuntu/Kali)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions
- Size perfectly fits the Pi
- High-quality immersion gold surface plating
- Supports Raspbian system, Ubuntu system, kali Linux system
- Support software keyboard (system interaction without keyboard/mouse)
- Dimension: 10 x 8 x 4 cm
- Weight: 150 Grams
CD4054 4 Segment Liquid Crystal Display Driver IC
- 4 Segment Liquid Crystal Display Driver With Strobed Latch Function
- Supply Voltage Range: 3 to 20V
- Input Current: ±10mA
- Power Dissipation: 200mW
- Low level Output Voltage: 0.05V
- High level Output Voltage Min.: 4.95V
- Low level Input Voltage Max.: 1.5V
- High level Input Voltage Min.: 3.5V
- Propagation Delay Time Max.: 800ns
- Package: DIP-16
CD4055BE CMOS Liquid Crystal Display Driver IC
- CMOS Liquid Crystal Display Driver
- Number of Digits: 1
- Number of Segments: 7
- Maximum Power Dissipation: 500 mW
- Maximum Supply Current: 100 uA
- Output Current Max: 5.8mA
- No. of Outputs: 7
- No. of Pins: 16
- Logic IC Family: CD4000
- Logic IC Function: BCD To 7 Segment Decoder / Driver with Display Frequency Output
- Operating Temperature Range: -55°C to +125°C
- Supply Voltage Range: 3V to 18V
- Package: PDIP-16
Stepper Motor Nema 23 kg 7.2 kg Dual shaft
- Rated Voltage: 6.6 V
- Current/ phase: 1A
- Resistance/ phase: 6.6ohms
- Inductance/ phase: 8.2 mH
- Holding Torque: 7.2 kg-cm
- of Leads - 6
- Rotor Inertia - 275
- Weight: 0.65kg
- Detent Torque: 0.36 kg-cm
- Step Angle - 1.8°
- Step Angle Accuracy - ±5% (full step, no load)
- Resistance Accuracy - ±10%
- Inductance Accuracy - ±20%
- Frame Size (mm) - 57x57
- Shaft Length (mm) - 20.6
- Shaft Diameter (mm) - 6.35
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
TEVO Tarantula I3 Aluminium Extrusion 3D Printer kit
- Layer resolution of 50 microns.
- MAX Printing Speed: 150 mm/s.
- Build size: 200X 200 X 200mm.
- Full Metal Bowden Extruder.
- Material type: PLA, ABS, PETG, Wood, PVA and Flexible Filaments (With Pro Metal Extruder).
- Material specifications 1.75mm in diameter.
- Positioning accuracy: Z 0.04mm, XY 0.012mm.
- Printing Color: Single color.
- Nozzle diameter: 0.4mm.
- Recommended extruder temperature: 210°C (the maximum can be set to 260°C).
- Heating plate temperature: 60-120°C (proper winter warming and summer appropriate cooling).
- Best ambient temperature: +/-25°C.
- Power requirements: 220V, 250W, 50Hz, 0.89A.
- Connection: TF card or USB.
- The file print format: STL, G-Code.
- Compatibility: Windows, Linux, Mac.
- CE, FCC specifications: CE, FC, ROHS.
- No Printed Parts.
- Easy Assembling.
- High Performance.
- 2020 and 2040 Aluminium Frames.
- Equipment size: 430 X 440 X400mm.
- Package size: 440X 340X 190m.
- Device weight: 7.5kg.
Waveshare 10.1inch HDMI LCD (B) (with case) 1280×800 IPS
- IPS screen,1280×800 high resolution
- Capacitive touch control supports up to ten-points touch
- When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free
- When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
- Supports BB Black, comes with Angstrom image
- HDMI interface for displaying, USB interface for touch control
- Supports 5-level backlight adjustment.
- Case Material: high-quality black Acrylic
- Comes with a back holder, 45degree tilt angle
- Dimensions: 18 x 10 x 9 cm
- Weight: 800gm
Reviews
There are no reviews yet.