I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-5%Sold out
Wire Stripper Flat Nose Cable Cutter with Practical Punch Down Tool
Original price was: ₹110.00.₹100.00Current price is: ₹100.00. inc. GST
XT90 Male-Female connector pair with Housing
Original price was: ₹375.00.₹350.00Current price is: ₹350.00. inc. GST
AP Extension pigtail SMA female socket jack to UFL IPX Connector
Original price was: ₹475.00.₹450.00Current price is: ₹450.00. inc. GST
- Frequency Range: DC-6GHz
- Impedance: 50Ω
- VSWR: 1.5 Max
- Insertion Loss: 1.8db
- Insulation Resistance: ≧5000MΩ
- Power Handing: 2W(cw)
- Working Temperature: -40°C to +85°CSize: 1.9 inches
- Color: Gray
- Material: brass connector
- Conductor Material: brass connector
- Length: 1.9 inche
Out of stock
Description
SMA Pigtail Cable to Ufl Extension Cable 1.13 Cable designed explicitly for mobile phone, antenna, WLAN applications. This is a SMA Bulkhead Female to IPX Ulf Female RF Coaxial Connector Pigtail Cable. It function as a IPX UFL Terminal Block Connector for a mini PCI card. It can be operated in a wide range of application including Mobile phones, Antenna, WLAN. And also Mini PCI, Bluetooth, PDA, GPS, drone, transmitter, and electronic measuring instrument. SMA Pigtail Cable comes in a cable length of 1.9 inches with a WIFI Antenna Extension Pigtail Jumper Cable SMA to IPX. This SMA Pigtail Cable to Ufl Extension Cable opeates at a frequency range of DC 6GHz at an impedance rate of  50Ω. Meanwhile, it provides a VSWR of 1.5max with an insertion loss of 1.8db.
Reviews (0)
Shipping & Delivery
Related products
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module SSR-25DA 25A /250V 3-32V DC Input 24-380VAC Output
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 25A.
- Working voltage: 250V.
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Dimension: 6. 5Cm x 4. 5Cm x 2. 2Cm
Solid State Relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD Relay Solid State
- Model: SSR-40 DD.
- Control mode: DC-DC
- Input voltage: 3-32V DC.
- Output voltage: 5-60V DC.
- Output current: 40A.
- On voltage: ≤1v.
- One-off time: ≤10ms.
- Off leakage current: ≤2ma.
- Loading current: 40A
- Control current: 3-25mA DC
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Weight: 0. 106Kg.
Reviews
There are no reviews yet.