I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-6%Sold out
12V 40W CR-10 ender 3 Extruder Assembled MK8 Hot End Kit for CR10 CR-10S S4 S5 Ender-3 Ender-3S Aluminum Heated Block parts 0.4m
Original price was: ₹220.00.₹175.00Current price is: ₹175.00. inc. GST
6 Inch 350w 36v Brushless E-bike Wheels Scooter Hub Motor
Original price was: ₹5,000.00.₹4,500.00Current price is: ₹4,500.00. inc. GST
CR-10 MK8 Drive Feed 3D Printer Extruder for Ender 3 CR-10 CR-10S CR-10 S4
Original price was: ₹850.00.₹800.00Current price is: ₹800.00. inc. GST
- This extruder set is great for Creality 3D Ender 3 ender 3 pro-CR-10.
- Filament Materials: PLA/ABS/Wood/TPU/PTEG,
- Made of high quality metal material.
- Easy and convenient to use.
- With high quality and durable performance.
- Main material: MetalMounting screws.
- Aluminium MK8 extruder frame, with bored intake hole.
- Spring. Brass extruder drive gear.
- Special Bowden tube fitting (great improvement over stock).
- For all 1.75 mm filament.
- Right hand extruder kit
- MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
Out of stock
Description
This CR-10 MK8 Drive Feed 3D Printer designed as the upgraded Aluminium replacement, Upgraded 3D Printer Extruder Block, with Full metal aluminum alloy. These  MK8 Drive Feed 3D Printer Extruder specifically for CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus replaces the acrylic parts of creality 3D printers. This MK8 extruder is quite simple to install, all you need to do is simply unbolt the old original plastic extruder and screw in the new “Metal Extruder”. Thus it is ready to print. These MK8 extruders are perfect for a 1.75mm filament 3D printer MK8 Bowden extruder frame.
The use of High-quality metal aluminum alloy features stability and durability. And performs better than the original plastic version. Thereby allows printing flexibles and regular plastic filaments. This MK8 extruder hot end comes with all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder. Moreover, this extruder driver offers better stronger pressure pushing the filament into the printer nozzle. Thereby improves the printers’ performance. The adjustable bolt-on the extruder kit allows you to adjust the pressure of the extruder gear as needed. This metal extruder kit uses a 1.75mm filament of 3D printer MK8 Bowden extruder frame. This extruder design provides complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. A 40 Teeth drive gear moves the 1.75mm filament very smoothly.
Reviews (0)
Shipping & Delivery
Related products
Creality 3D Ender-3 Pro V-slot Prusa I3 DIY 3D Printer
- Modelling technology: FDM ( Fused Deposition Modelling）
- Printing size: 220 x 220 x 250 mm
- Machine size: 440 x 410 x 465 mm
- Max traveling speed: 180mm / s
- Filament: 1.75 mm PLA, TPU, ABS, Gradient color, carbon fiber, etc.
- Input: AC 100 - 265V, 50 - 60Hz
- Output: DC 24V, 15 A, 360W
- Layer thickness: 0.1 - 0.4 mm
- Nozzle diameter: 0.4 mm
- Precision: ±0.1 mm
- File Format: STL, OBJ, G-Code
- Working mode: online or SD offline
- Max nozzle temperature: 255 Deg.C
- Max hotbed temperature: 110 Deg.C
- Bed Temp.: ≤110℃.
- Slice Software: Cura, Repetier-Host, Simplify3D.
- W: 6.9KG.
- W: 8.9KG.
- Package Size : 595*495*165mm. "
Creality 3D Ender-5 DIY 3D Printer Kit 220*220*300mm Printing Size
- Moulding Technology: FDM.
- Print Dimensions: 220*220*300mm.
- Print Speed: <180mm/s, Normal Printing Speed 40-80 mm/s.
- Print Accuracy: + - 0.1mm.
- Layers Thickness: 0.1-0.4mm.
- Nozzle Diameter: Standard 0.4mm. Convertible 0.2, 0.3mm.
- Nozzle Quantity: 1.
- Nozzle Temperature: <260 Degree C
- Hot Bed Temperature: <135 Degree C
- Working Modes: Online or TF Cards are printed offline.
- File Formats: STL, ODJ, AMF.
- Slicing Software: Cura, Repeti-Host, Simlify 3d.
- Power Parameters: Input:110v/220v. 50/60Hz. Output: DC 24V.
- Machine Power: 270W.
- Printing Materials: PLA, ABS, Soft Glue, Wooden, Copper Containing, Gradient, etc.
- Consumables Diameter: 1.75mm.
- Heating upto 100 deg C in 5 mins,
- Printing with High precision,
- Resume Printing after power-off,
- Soft Magnetic Stickers - Instead of traditional beauty paper & glue, easy to mold, model adhesion is good.
- Built-in Power Supply - 350w high-quality power supply, easy to achieve long time stable printing.
- Dual Y-Axis - synchronization, small moving quality, flexible & reliable.
- Down Shift Z-Axis - for smoother movement.
- Descartes Design - Down Shift Z-axis for smoother movement.
GT2 Open Timing Belt for 3D Printer and CNC
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
NEMA 23 10.1 kg-cm
- Operating Voltage : 2.3 Volts
- Step Angle : 1.8°
- Holding Torque : 10.1 kg-cm
- Supply Current (A) : 2.8 Ampere/Phase
- Number of Leads : 4
- Inductance : 2.2 mH/Phase
- Resistance : 0.83 Ohm
- Rotor Inertia : 275 gm-cm2
- Weight (gm) : 650
- Detent Torque (kg-cm) : 0.36
- Frame Size (mm) : 57 x 57
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Step Angle Accuracy : ±5%
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
- Current / Phase: 1.5A
- Step Angle(degrees): 1.8
- Phase: 2
- Type: Hybrid
- Certification: ROHS,CE
- Holding Torque: 4.2 KGCM
- Step angle accuracy: + - 5%(full step, not load)
- Resistance accuracy: + - 10%
- Inductance accuracy: + - 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature: -20deg ~+50deg
- Insulation resistance:100M Min,500VDC
- Insulation Strength: 500VAC for one minute
- (Lead Screw)
- Lead Screw Material: 304 Stainless Steel
- Color: Sliver
- Diameter: 8mm
- Length: 300mm
- Lead of thread: 8mm.
Ramps 1.6 For 3D Printer Parts
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
- Design of Pololu plate pin socket can be easily replaced or removed for future design.
- I2C and SPI pins are available for future expansion.
- Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
- LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
- Dimension: 101.5 * 60.5mm
Stepper Motor Nema 23 kg 7.2 kg Dual shaft
- Rated Voltage: 6.6 V
- Current/ phase: 1A
- Resistance/ phase: 6.6ohms
- Inductance/ phase: 8.2 mH
- Holding Torque: 7.2 kg-cm
- of Leads - 6
- Rotor Inertia - 275
- Weight: 0.65kg
- Detent Torque: 0.36 kg-cm
- Step Angle - 1.8°
- Step Angle Accuracy - ±5% (full step, no load)
- Resistance Accuracy - ±10%
- Inductance Accuracy - ±20%
- Frame Size (mm) - 57x57
- Shaft Length (mm) - 20.6
- Shaft Diameter (mm) - 6.35
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Reviews
There are no reviews yet.