I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
DAC0808 8-Bit Multiplying Digital-to-Analog Converter IC
₹200.00 Original price was: ₹200.00.₹160.00Current price is: ₹160.00. inc. GST
- 8-Bit Multiplying Digital-to-Analog Converter
- Settling Time:Â 70ns
- Multiplying Rate: 4mA/µs
- Maximum Power Dissipation:Â 1450mW
- Reference Current:Â 5mA
- Output Current:Â 2mA
- Resolution:Â 8 bits
- Propagation Delay Time Max. :Â 100ns
- Supply Voltage Range: ±5V to -15V
- Package:Â DIP-16
The DAC0808 was designed as an 8-bit monolithic digital-analog converter (DAC). This DAC IC features a full-scale output current settling time of 150 ns while dissipating only 33 mW with ±5V supplies. because the full-scale output current ranges typically ±1 LSB of 255 IREF/256, no reference current (IREF) trimming is important for many applications. Meanwhile, the Relative accuracies of higher than ±0.19% assure 8-bit monotonicity and linearity. While zero level output current of but 4 µA provides 8-bit zero accuracies for IREF>=2 mA.
The power supply currents of the DAC0808 independent of bit codes. And exhibits essentially constant device characteristics over the whole supply voltage range. The DAC0808 will interface directly with popular TTL, DTL or CMOS logic levels, and may be a direct replacement for the MC1508/MC1408. The chip accuracy of conversion is sweet and power consumption is additionally low to form it popular.
DAC0808 IC widely utilized in applications where a digital to analog conversion required. The chip wont to be popular a decade ago and its applications wont to be many but at the present there are many modern IC which may perform DAC with higher resolution, speed and also efficiency. The device inputs parallel 8 bit data from a microcontroller or microprocessor. And converts that data in to analog signal at the output. And therefore the analog output from DAC may be a current quantity and this needed to be converted in to voltage parameters for use in application easily. So to convert the present parameter in to voltage parameter we’ll use op-amp circuit. These op-amp circuits called a current-to-voltage converter. The output analog voltage from op-amp comes in linear relation with input digital value. Thus DAC conversion with DAC0808 obtained.
Applications
- Analog and digital circuits
- Electrical measurement
- Audio conversion
- Hobbyist applications

Related products
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.

Reviews
There are no reviews yet.