I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-25%
DC POWER SUPPLY MODULE FOR DC ADAPTER PLATE
Original price was: ₹150.00.₹99.00Current price is: ₹99.00. inc. GST
DC –DC 600W 10-60V TO 12-80V BOOST CONVERTOR STEP UP MODULE POWER
Original price was: ₹2,000.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
DC-DC BOOST MODULE 0.9V-5V/5V 600MA USB MOBILE Power Supply Module
Original price was: ₹200.00.₹150.00Current price is: ₹150.00. inc. GST
- Ultra-compact PFM chip
- Module properties: nonisolated step-up module
- Input voltage: 1v-5v
- Output voltage: 5.1v-5.2V
- Output current: rated 1A-1.5A
- Efficiency: 96%
- Output ripple: 30mv for 20M bandwidth
- Switching frequency: 500khz
- Voltage indication for led lights with load( for less than 2.7v led indicator off)
- Operating temperature:-40 degrees to 85 degrees Celsius
- Full load temperature rise: 30 degrees Celsius
- Quiescent current: 130ua
- Load regulation: +/-1%
- Voltage regulation: +/-0.5%
- Dynamic response speed: 5% 200Us
- Short circuit protection
- Reverse polarity protection
- Dimension: 2.5*1.8*1.8gm
- Weight: 400gm
Description
This is designed as a high-performance module that provides superior function compared to common modules. These are controller chips with onboard ultra-compact PFM control. Any dc voltage of 0.9V to 5V will generate a stable output 5V DC voltage for an output current of 600mA. It uses two AA batteries as input to a single AA battery-powered output with a current of 200 mA. As a result, used in mobile phones, cameras, single-chip, digital products only. Here the USB interface can be directly powered with USB female versatile. This module provides overload and over-voltage protection and also short circuit protection into a state below 2.5V. Thereby offering better protection for the module and thus avoiding excessive discharge. This module offers a conversion efficiency of 96% providing a low ripple factor.
This module is widely used In order to power your electronic devices when your device needs 5V power supply. Or when we are using a lithium battery, this module can be directly step-up to 5V. Also used in DIY is a mobile power supply, which needs one battery with 5v output such as for your phone, MP3, MP4, PSP charger, very easy. This USB mobile DC step-up module uses a standard USB interface, which supports all universal USB charging mobile phones, MP3, MP4, and other equipment. The module consists of an on-board LED which indicates the charging status when USB is charging.
Reviews (0)
Shipping & Delivery
Related products
1 CHANNEL 12V RELAY
- 1-Channel relay interface board
- Operating voltage: 12V DC
- Provide high current relay of 15A
- For quick and easy connection high-quality screw terminals provided
- Can control both AC & DC appliances
- LED status indicates relay ON/OFF state.
- High current relay of 10A @250 V AC/10A@ 30V DC
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Dimension: 43*17*17mm
- Weight: 150gm
10D OF 9-AXIS GY-87
- Power supply: DC 3.3V TO 5V
- 3 Axis Gyro+ Acceleration+ Magnetic field
- Air pressure module
- Inbuilt ultra-low noise linear LDO voltage regulator
- Inbuilt onboard filters. which reduce noise from motor and another high current
- Communication: I2C protocol
- Power LED
- Designed for 5V logic
- Can easily select two I2C addresses for MPU6050 by soldered jumper
- Dimension: 2.2*1.7cm
- Size: 6gm
16 CHANNEL 12V RELAY
- 16 channel 12V relay board
- Operating voltage: 12V
- Supply current: 0.2 A
- Relay contact current capacity of 10A @250 V AC/10A@ 30V AC
- Optocoupler protection
- LED status indicates relay ON/OFF state.
- The 10-16 road can be any full-on/off or any road
- Common terminal(com) in each rely is user friendly and can be accessed by different signal
- Normally closed or normally open with each port
- Strong anti-jamming ability and stable performance
- The on-board power supply module doesn’t need any external power
- Dimension: 180*90*20mm
- Weight: 100gm
3.3V/5V MB102 Breadboard Power Supply Module
- Input voltage: 6.5V to 12V
- Output voltage: 3.3V to 5V
- Output current: 700Ma
- Apply to MB102 breadboard
- Sorting jumpers used to switch voltage between 3.3V and 5V
- Onboard LED indicator to show the presence of power
- Short circuit protection
- Fits securely on standard 400 and 830 points on the breadboard
- Dimensions: 53*32*23mm
- Weight: 10gm
3V To 5V 1A USB Charger Step Up Boost Module
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN - negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
USB Charger Doctor
- Display data: Voltage Current
- Operating Voltage: 3.5 to 7 V
- Maximum Current: 3 A ( accuracy of 0.4% )
- Battery Capacity (0-99999mah)
- Working time (0-99Hour)
- Charger voltage compliance DC 5V
- Resolution : Voltage 10mV current 1mA
- Error : voltage <± 1% current <± 2%
- USB Plug: 13mm / 0.5"
- RTZ, Reset button, press it three seconds will Reset
- The working time and Capacity have a Memory function when power is off.
- Compact and easy to carry, no additional power supply, plug, and play
- Detect any USB charger such as PC USB, home charger, car charger
- Easily measures the output voltage of the USB port and the device operating current or load voltage
- Dimensions: 21mm x 53mm x 15mm
- Weight: 16.2gm
Reviews
There are no reviews yet.