I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Line Tracker following Robot Car kit and multiple gameplay
- Three programming tools are supported:Scratch,Mixly IDE and Arduino IDE
- The four-wheel-drive is powerful
- Support Bluetooth remote control
- APP supports muti-mode free switching
- Free lessons are provided
- Modular installation,simple assembly
- Integration of nine functions,a variety of way to play
- Two RGB headlights
- Support Android and IOS
This is Educational Robot STEAM Kit with an instruction manual – Line Tracker following Robot Car kit and multiple gameplay. This educational kit for beginners (kids) to urge hands-on experience about the soldering project knowledge of mechanical structure, electronic basis skills, the principle of the sensor, basic automatic control, soldering skill than on. This Learning & Education Line Tracker following Robot Car kit designed as an educational toy that integrates education, entertainment, and environmental protection, and can create a vivid and tangible course for children.
This robot car is unique for the overall structure, using the PH2.0 interface, making wiring more convenient. As it  does not require welding, not only can make the robot car look more beautiful, but also make it easier for children to get started. Additionally, it can be controlled by the mobile app (Android) via Bluetooth, as well as the PS2 controller (PS2 needs to be purchased separately), and remote control, so that children have a lot of fun in controlling the car. Moreover, the tracking module provided for it, which can be moved according to a certain line. Apart from these, this line robot car features WIFI control, Voice AI,RGB Ultrasonic,Cool Light,Light Tracking, Draw Line to Run,Gravity control,Obstacle avoidance,Infrared tracing,Infrared remote,Bluetooth module and more function.
This line robot car supports three programming ways: Arduino programming, mixed programming, scratch programming. And also the eyes of the robot car have the function of changing colors. It performs following functions:
- Searching light track by photosensitive
- Walking along the black line
- Avoiding obstacles by infrared
- Avoiding obstacles by ultrasonic
- Infrared remote control
- Bluetooth control
- PS2 remote control
- Two RGB headlights
- Support Android and IOS
- Wifi control(Need to purchase additional wifi module)

Related products
4*4 MATRIX KEYPAD
- The maximum current across each button: 3mA
- Easy communication with any microcontroller
- Ultra-thin design
- Adhesive backing provides easy integration
- High price-performance ratio
- Allows microcontroller to scan 8 output pins to check which 16 button
- Long life
- Maximum operating temperature: 0 degrees to 50 degrees Celsius
- Dimension: 70*77*1mm
- Weight: 7.5gm
Arduino Duemilanove Development Board with USB Cable
- Microcontroller: ATmega168/ATmega 328
- Operating Voltage: 5V
- Input Voltage: 7-12V
- Input Voltage: 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by the bootloader
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
- Clock Speed: 16 MHz
Bluetooth Relay Shield
ESP8266 WIFI Shield
- Operating voltage 5V (supplied from the Arduino Board)
- Connection via: 802.11b/g networks
- Encryption types: WEP and WPA2 Personal
- Connection with Arduino on SPI port
- on-board micro SD slot
- ICSP headers
- FTDI connection for serial debugging of WiFi shield
- Mini-USB for updating WiFi shield firmware
- 32-bit RISC architecture
- The processor can operate at 80MHz / 160MHz
- 32MB flash memory
- 64kB for instructions
- 96kB for data
- Operates in AP, Station or AP + Station mode
- It has 11 digital pins
- It has 1 analogue pin with 10-bit resolution
- Digital pins except the D0 have interrupts, PWM, I2C and one wire
- Programmable through USB or WiFi (OTA)
- Compatible with Arduino IDE
- Compatible with modules and sensors used in Arduino
Pro Micro 5V 16M Mini Microcontroller Development Board For Arduino
SD Card shield V4.0 for Arduino UNO
- Standard SD card, SDHC card and TF card compatible
- 3.3v and 5v logical voltage compatible
- 2.6-3.6v DC power supply
- UART Grove & I2C connection compatible
- Fully supported SD Library
- Minimal number of SPI port
- Jumpers provided for configuring Arduino SPI port pins
- Onboard toggle switch for SD card select type
- Truly stackable
- Prototype expand Library support
- Size: 53mm x 47mm
- Weight: 35g
Sensor Shield V5 Expansion Board For Arduino
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 Wireless RF modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
STM32 Nucleo-64 development board with STM32F103RB MCU, supports Arduino and ST morpho connectivity
- STM32 microcontroller with LQFP64 package
- Two types of extension resources
- mbed-enabled (mbed.org)
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Flexible board power supply
- Three LEDs
- Two push buttons: USER and RESET
- USB re-enumeration capability: three different interfaces supported on USB
- Comprehensive free software HAL library including a variety of software examples
- Supported by wide choice of Integrated Development Environments (IDEs) including IAR, Keil, GCC-based IDEs

Reviews
There are no reviews yet.