I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-10%Sold out
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
Original price was: ₹450.00.₹400.00Current price is: ₹400.00. inc. GST
Anti-Corrosion Water Level Sensor with Ball Float Switch
Original price was: ₹400.00.₹350.00Current price is: ₹350.00. inc. GST
Floating Straight Automatic Water Level Control For Water Tank-14014449MG
Original price was: ₹500.00.₹450.00Current price is: ₹450.00. inc. GST
- Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop.
- Four Intakes, Large Volume Of Water.
- Beautiful Appearance, Small Size, Practical, Simple Installation.
- Without Electricity, Easy To Use, Long Life, Low Failure Rate, Saving Water Resources.
- Working Pressure Range: 0.2-10Kg.
- Applicable Medium: Clean Water.
- Applicable Medium Temperature: ≤70degree C
- Resistance to High-Temperature to Medium Temperature: 70degree to 120degree C
- Material: Nylon Pa66, Stainless Steel Screws, Food Grade Rubber.
- Diameter: Approx. 46Mm / 1.81Inch.
- Dimension: Approx. 83*71mm
Out of stock
Description
Floating Straight Automatic Water Level Control For Water Tank-14014449MG designed as a replacement of the Traditional Float Ballcock. This water level controller can be widely used in various systems such as high water tanks, Pools, Water Towers Of The Industry And Civil Construction, Etc.
In this water level controller, when the water level in the pool or tank falls, the valve body will sink down. As a result, the forerunner of the control valve will be opened. So as the pipe water pressure affects, the seal face of the control valve will be opened. Finally, the water comes out and vice versa. This water level controller operates in clean water at a temperature of 70 degrees C. This automatic control device functions without electricity featuring Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop. It consists of four intakes for water, thus a large volume of water can be operated at a time. Moreover, this compact-sized, beautiful appearance water level controller is quite simple to install.
NOTE:
- Maintain the valve regularly, if water quality is not good.
- In case, if the user finds the time of adding Water Becomes Longer, he can just upload the water inlet and make it washed.
APPLICATION:
- Water tower tank
- Solar, Toilet, Aquarists
- Agricultural Irrigation
- Food Machinery, humidifiers, heaters,
- Livestock drinking and swimming pool water control.
+
Reviews (0)
Shipping & Delivery
Related products
4 Pin Digital LCD Wood Moisture Meter Timber Damp Detector Tester 5% 40%
- Model:MD-4G
- Display: LCD Display
- Range:5%~40%
- Resolution:1%
- Single probe length:10mm
- Color: Gray
- Material: Plastic
- Power Supply:1 x 9V Battery (Not included)
- Measure moisture content of wood, bamboo, paper etc.
- Stable performance and quick response, the meter is really reliable.
- With data hold function and low battery indication
- Dimension: 123 x 65 x 23mm
- Weight: 78g
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
- Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
- Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
- Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
- Quiescent current: 20mA
- Operating current: 50mA
- Service life: more than 100,000 times
- Working temperature: -40°C-85°C
- With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
- Dimension: 6.2 * 3.8 * 1.7cm
Brass G1/4″ BSP Hall Effect Flow Sensor Water 0.35-3.0L/min OD12 WaterTurbine Flowmeter SEN-HZ41WC
- Water quality requirement: Drinking water health standards, 0-80℃.
- Flow range: 0.35 -0 Liter/min.
- Withstand hydraulic pressure: ≤1.75 MPa.
- Operating voltage: DC 4.5 - 18 Volt
- Operating current: ≤15mA.
- Insulation resistance: >100MΩ.
- Electrical strength: AC500V, 50HZ.
- Output level: Rated voltage DC5V, high level ≥4.5 Volt, low level ≤0.5 Volt.
- Pulse duty cycle: 50%.
- Flow characteristic: F=73Q, F: HZ, Q: L/min，±10%.
- Cumulative flow conversion: 1 Litre water=1780 pulse, accuracy: 8%.
G3/4 Thread Water Flow Sensor Switch Control Meter Flowmeter 1-30L/min SEN-HZ43WB
- Water quality requirement: Drinking water health standards, 0-80℃
- Flow range: 2-45 Liter/min
- Withstand hydraulic pressure: ≤1.75 MPa
- Voltage/electric current: DC 4.5 - 18 Volt , ≤15mA
- Insulation resistance: >100MΩ
- Electrical strength: AC500V, 50HZ
- Output level: Rated voltage DC 5 Volt, high level ≥4.5 Volt, low level ≤0.5 Volt
- Pulse duty cycle: 50%
- Flow characteristic: F=8.1Q-3, F: HZ, Q: L/min，±10%
- Cumulative flow conversion: 1 Liter water=477 pulse, accuracy: 10%
Mh13001 220V Digital Air Humidity Control Controller Range 1% – 99%
- Model Name: MH 13001
- Voltage: 220 Volt
- Accuracy: +-3% RH
- Type: Digital
- Color: Black
- Display Type: LCD
- Input Sensor: Humidity Sensor
- Humidity: 1% ~ 99% RH\humidity measuring
- Error: ±3 percent rh
- Control range: 1 percent RH
- Power consumption:3w
- Output load: Ac 10a/220v
- Working temperature: 0°c - 80 °c
- Dimensions: 8 x 5 x 3cms
- Usage/Application: Air Humidity Controller Hygrostat Humidistat Humidification Dehumidification
YF-S401 PVC Water Flow sensor
- Model: YF-S402
- Voltage Range: 5~12 V
- Operating Current: 15 mA (DC 5V)
- Insulation Resistance: >100 MΩ
- Inner Diameter: 4 mm
- Outside diameter: 7 mm
- Proof Water Pressure: <0.8 MPa
- Water Flow Range: 0.3-6 L/min
- Accuracy: ±5% (0.3-3L/min)
- Output Pulse High Level: >4.5 VDC (DC input voltage 5 V)
- Output Pulse Low Level: <0.5 VDC (DC input voltage 5 V)
- Output Pulse Duty Ratio: 50% ± 10%
- Water-flow Formula: 1L = 5880 square waves
- Working Humidity Range: 35% ~ 90% RH (no frost)
- 6 mm hose is recommended
- Avoid unit contact with corrosive chemicals
- The unit must be installed vertically, tilted no more than 5 degrees
- The liquid temperature should be less than 120 C to avoid damage to the unit
- With stainless steel axis in the wheel, abrasion-resistant
- Dimension: 58*35*26 mm
- Weight: 30g
YF-S402 High Precision Flow Meter Water Flow Sensor
- Model: YF-S402
- Minimum rated working voltage: DC 5~24V;
- working current: 15mA (DC 5V);
- Working voltage range: DC 5~18V;
- Load capability: <= 10mA (DC 5V);
- Working temperature: <= 80'C;
- Humidity range: 35%~90%RH (no frost);
- Water pressure: <1.75Mpa;
- Storage temperature: -25~80'C; Storage humidity: 25~95%RH;
- Flow range: 1~5L/min'; Frequency: 4380 pulse for 1L through the sensor
- Dimensions: 2.28 in x 1.38 in x 1.06 in (5.8 cm x 3.5 cm x 2.7 cm)
- Thread Size : G1/4"
Reviews
There are no reviews yet.