I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Generator Motor Big
₹150.00 Original price was: ₹150.00.₹90.00Current price is: ₹90.00. inc. GST
A motor-generator is a device that converts electrical energy into a different form. Frequency, voltage, and phase of electricity are all converted using motor–generator sets. They can also be used to disconnect electrical loads from the power source. Large motor–generators were commonly used to convert industrial volumes of electricity, while smaller motor–generators (like the one in the photo) were used to convert battery power to greater DC voltages.
Electrical loads are isolated from power supply lines using motor generators. It is made up of an electric generator that is powered by an electric motor. This is used to convert the frequency, voltage, and phase of electrical power. Unlike a traditional electrical generator, it is powered by a stream turbine or internal combustion engine.
They are also used to:
- Isolate electrical loads from the electrical power supply line
- Eliminate spikes and variations in large power supplies
- Provide phase matching between different electrical systems
Smaller motor-generators have been used to convert battery power to greater DC voltages, while larger motor-generators have been used to convert industrial volumes of electricity.

Related products
28BYJ-48 5V Stepper motor
- High-quality stepper motor
- Voltage: DC 5V
- Diameter: 25mm
- Step Angle: 5.625 x 1/64
- Reduction Ratio: 1/64
- Rated voltage : 5VDC
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625° /64
- Frequency : 100Hz
- DC resistance : 50Ω±7%(25℃)
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque >34.3mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10MΩ(500V)
- Insulated electricity power :600VAC/1mA/1s
- Insulation grade :A
- Rise in Temperature <40K(120Hz
- Noise <35dB(120Hz,No load,10cm)
BO Motor Double Shaft 200 RPM
- Shaft length: 7 mm Motor Design: Straight Dual Shaft
- Shaft Diameter: 5.5 mm
- Size: 55 x 48 x 23 mm.
- Operating Voltage: 3 to 12V.
- Current (without loading): 40-180mA.
- RPM: 200 rpm.
- Output Torque: 0.35 kg cm.
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances are often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
Coreless Drone Motor
MOTOR SHIELD L293
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.

Reviews
There are no reviews yet.