I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-8%
Back to products
A4988 STEPPER MOTOR DRIVE CONTROLLER BOARD
Original price was: ₹275.00.₹250.00Current price is: ₹250.00. inc. GST
Generic Portable MT87 Digital Multimeter LCD Clamp AC DC Voltage Current Amp Ohm Tester
Original price was: ₹600.00.₹550.00Current price is: ₹550.00. inc. GST
• Function Range: Accuracy
• DC voltage: 600V±0.8%+1dgt
• AC voltage: 450V±1.0%+4dgts
• Resistance: 200KΩ±1.0%
• AC Current: 20A-200A-400A±2.0%+5dgts
• Power supply: 1.5V 2x AAA batteries (not included)
• Max display: 1999
• Buzzer: Yes
• Diode test: Yes
• Data hold: Yes
• Dimension: 150L×63W×28H(mm)
• Display size: 14mm×47mm
• Color: black+yellow
• Material: plastic+electronic part
Description
This is Generic Portable MT87 Digital Multimeter LCD Clamp AC DC Voltage Current Amp Ohm Tester. MT87 digital multimeter comes with a unique feature of Measuring precision AC/DC current up to 400A and DC/AC voltage up to 600V.This compact sized light weight designs enables the multimeter Safety design with no exposed parts, shielded banana part and recessed terminals.
This device comes with a 3 1/2 LCD display providing life display of the digital values. The multimeter can read values upto 1999. Moreover, it features buzzer off and diode test function, along with low battery indicator features. The pocket size designe allows easy handling of the multimeter. This generic potable MT87 digital multimeter offers high accuracy operating at a DC voltage range of 600V±0.8%+1dgt and AC voltage of 450V±1.0%+4dgts. And also it comes with a Resistance of 200KΩ±1.0%. A 1.5V 2x AAA batteries which is not included in the device is used for the functioniing of the digital multimeter.
This portable device are widely used in measurement of
• DC voltage Current check
• AC voltage Current check
• Important Safety Information
• Diode check
• Continuity Test
• DC , AC Amp check
• Ohm check
• And other option
Reviews (0)
Shipping & Delivery
Related products
1.8″ TFT DISPLAY FOR ARDUINO
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
- 18-bit (262,144) colour
- 4 or 5 wire SPI digital interface
- Built-in microSD slot – uses 2 more digital lines5V compatible!
- Use with 3.3V or 5V logic
- On-board 3.3V @ 150mA LDO regulator
- 2 white LED backlight, a transistor connected so you can PWM dim the backlight
- 1×10 header for easy breadboarding
- 4 x 0.9″/2mm mounting holes in corners
- Overall dimensions: 34 x 56 x 6.5mm
- Current draw is based on LED backlight usage: with full backlight draw is ~50mA
10 Pieces Diamond Burr Bits Drill Kit for Engraving Carving Rotary Tool Set
- High-quality diamond-coated bur set with 3.1mm shanks
- Suitable for the hanging mill, electric mill, engraving machines, electric machinery
- Can Carve wood, plastic and other soft materials
- Can be used to various applications including carving, grinding and etching on a variety materials
- Perfect For All Sorts Off Jobs Like Model Making,
- Compatible With Other Multi-Tool Machines
- Supporting assembly mainly used to polish glass, jade, repair abrasive and other hard objects electroplated diamond grinding
- 10 pieces assortment of various shapes and sizes bits
- Come in different sizes and coarseness to satisfy any technology fit most professional electric drills,
- Best for replacing nail drill bits can be used to various applications
- High efficiency, high-quality finish, long service life, good economic returns.
- Easy to use, safe and reliable, can reduce labor intensity.
- length: approx. 6cm
- Materials: HSS
3.2 Inch Touch Screen
- Version: V4.0
- Resistive touch.
- Dimension: 3.2 inch.
- Operating Voltage: DC 5V.
- Driver: XPT2046.
- Resolution: 240 x 320.
- Compatible with any version of the raspberry pie
- Drivers provided (works with your own Raspbian/Ubuntu/Kali)
- Supports FBCP software driver as well, allows to config software resolution and set up dual-display
- Comes with three buttons for easy application
- Play videos (supports multi formats, MP4, and so on)
- Take photos by touching
- Support software keyboard (system interaction without keyboard/mouse)
- The Raspbian system, have the following features:1. Take pictures (17 kinds of camera mode) 2. Support soft keyboard (from the mouse and keyboard can control the system) 3. Surfing the Internet
- Dimension: 10 x 8 x 4 cm
- Weight: 150 Grams
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
7 mm 6 LED Endoscope Waterproof Inspection Borescope Camera 5M USB Cable
- Lens Diameter: 7.0MM
- Pixel: 0.3 megapixels
- Resolution: 640*480
- sensor size: 1/9 inch
- Frame Rate: 30fps
- View Angle: 67 degree
- Focal Distance: 3cm-10cm-
- LED Lights: 6pcs
- Interface: USB2.0
- Photo format: jpeg
- Video Format: AVI
- Waterproof level: IP67
- Support Computer: Windows XP/7/8/10/Mac
- Cable Length: 5M
- operating temperature: 0 degrees to 70 degree
- Dimension: Approx. 13.5*13.5*3cm
- Weight: 52g
7” Touch Screen
- 800×480 high resolution.
- Viewable screen size: 155mm x 86mm
- 10 finger capacitive touch
- Supports Raspberry Pi, and the driver is provided (works with custom Raspbian directly).
- Supports BB Black, comes with related images like Angstrom.
- Supports Banana Pi / Banana Pro, which comes with related images like Ubuntu, Raspbian.
- Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
- The Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
- Require the latest version of Raspbian OS to operate correctly
- Not only for mini-PCs, but it can also work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case).
- HDMI interface for displaying, USB interface for touch control.
- Back light control to lower power consumption.
- Screen Dimensions: 194mm x 110mm x 20mm
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
- Input Voltage: 4.5V to 30V DC
- Input Current: <= 20mA
- Display Colour: Red (Voltage), Blue (Current)
- Measuring Voltage Range: 0V to 100V DC
- Measuring Current Range: 0A to 10A
- Measurement Accuracy: 1%
- Minimum Voltage Resolution: 0.1V
- Minimum Current Resolution: 0.01A
- Voltage error: ±0.1%
- Current error: ±1%
- Working temperature: -10℃ to 65℃. Blue
- 28’’ device with 5 wires divided into 2 sets.
- Black, Red are for the power supply and 3 wires to measure the Voltage and Current.
- Dimension: 48mm x 29mm x 22mm
Reviews
There are no reviews yet.