I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-20%
MPU6050 6AXIS (GYROSCOPE + ACCELEROMETER) SENSOR
Original price was: ₹500.00.₹450.00Current price is: ₹450.00. inc. GST
PIR Sensor
Original price was: ₹170.00.₹105.00Current price is: ₹105.00. inc. GST
GY-906-BCC MLX90614ESF-BCC IR TEMPERATURE MODULE
Original price was: ₹2,500.00.₹2,000.00Current price is: ₹2,000.00. inc. GST
- Input supply: 3V-5V
- Input current: 2mA
- Small size, low cost.
- Mounted on a breakout board with two types of pins.
- 10k pull up resistors for the I2C interface with optional solder jumpers.
- Easy to integrate
- Factory calibrated in a wide temperature range
- Mounted on a breakout board with two types of pins
- -40 degrees to 125 degrees C for sensor temperature
- -70 degrees to 380 degrees C for object temperature.
- High accuracy of 0.5C over a wide temperature range
- The measurement resolution of 0.02C
- Single and dual-zone versions
- SMBus compatible digital interface
- Customizable PWM output for continuous reading
- Simple adaptation for 8v to 16V applications
- Sleep mode for reduced power consumption
- Different package options for applications and measurements versatility
Description
MLX90614’s is an infrared thermometer designed for non-contact temperature which is perfect for measuring the temperature of moving objects. MLX90614’ offers an internal 17-bit ADC, a low noise amplifier, and a powerful DSP ensuring high accuracy and resolution. This module consists of both the IR sensitive thermopile detector chip and the signal conditioning ASIC integrated into the same TO-39 can. The sensor provides a field of view of 35 degrees with a gradient of temperature compensation for short-distance measurement. Thus it provides a sensing range from 4 cm -10 cm approximate. Moreover, the breakout board comes with all of the components needed for operation and two types of pins.
GY-906 MLX90614ESF non-contact infrared thermometer can be interfaced easily with Arduino, or any microcontroller that can communicate via dedicated I2C protocol and uses the same SDA (Data) and SCL (Clock) lines. This module consists of 4.7K pull-up resistors on these lines. MLX90614’module consists of an onboard 662K 3.3V regulator that can handle up to 6V max on the VIN power input pin though 5V is typical. When the module is powered with 3.3V on the VIN pin, the voltage passes through the regulator with minimal voltage drop. Thus the module is compatible with both 5V and 3.3V MCUs.
While working as a thermal switch, a preset temperature can be programmed into the device. Whereas when the temperature reached, the PWM pin triggered causing interrupt input to an MCU or used to directly drive a relay or similar device. The output drive capability is 25mA. The user configures the module outputs a continuous 10-bit PWM signal on the SDA pin. Thus configured continuously to transmit the measured temperature in the range of -20 to 120 °C, with an output resolution of 0.14 °C, adjusted via the I2C bus.
APPLICATION:
- High precision non-contact temperature measurements
- Thermal Comfort sensor for Mobile Air Conditioning control system
- The temperature sensing element for residential,
- commercial and industrial building air conditioning Windshield defogging
- The automotive blind angle detection
- Industrial temperature control of moving parts
- Temperature control in printers and copiers
- Home appliances with temperature control
- Livestock monitoring
- Movement detection
- Thermal relay/alert
- Body temperature measurement
Reviews (0)
Shipping & Delivery
Related products
GY-906 MLX90614ESF Contactless Temperature Sensor Module
- Small size, low cost
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder jumpers
- Easy to integrate
- Factory calibrated in wide temperature range:
- Sensor temperature: -40...+125°C
- Object temperature: -70...+380°C
- High accuracy of 0.5°C over the wide temperature range
- (0...+50°C for both Ta and To) High (medical) accuracy calibration
- The measurement resolution of 0.02°C
- Single and dual-zone versions
- SMBus compatible digital interface
- Customizable PWM output for continuousreading
- Simple adaptation for 8...16V applications
- Sleep mode for reduced power consumption
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
- Model: HC-SR505
- Operating Voltage Range: DC4.5-20V
- Average Current Consumption (mA): 0.06
- Distance Measuring Range: 3 meters
- Delay time: Default 8S + -30% (can be customized)
- Working Temperature Range: -20°C ~ 80°C
- Sensor Lens Diameter: 10mm
- Induction angle: <100-degree cone angle
- Low-power consumption
- Output level: High 3.3V / Low 0V
- Trigger: repeatable trigger (default)
- Automatic induction: to enter the sensing range of the output is high, people leave the sensor range automatically delay off high, output low
- Dimensions: 10 x 23 x 5mm
- Weight: 10gm
Infrared Ir Obstacle Avoidance Detector Sensor Module Adjustable 2-180cm
- Power requirements: 5 VDC
- Communication: Digital High/Low Output
- A variety of welding methods, vertical and horizontal, to expand the scope of application
- Add precision potentiometer to adjust infrared 38KHz detection range
- Sensor detection with enabling the port, convenient signal line as bus application line
- Power-on enable port default level, the sensor enables the detection output signal
- Detection range up to 1.2 meters
- Software enhancement, setting can avoid infrared light interference of the same module or other kinds of infrared remote control devices
- Working condition of each module recorded with EEPROM, reduce the probability of mutual interference of the same paragraph to 1%
- Signal low output
- Pin SIP header, applied in breadboard or through-hole project
- On-board set jumper JP, the signal output has a latch function when shorted, otherwise, it is jog output
- Operating temperature: 32 to 158 ° F (0 to +70 ° C)
- Size: 2.4cm × 2.8cm
IR LED 3mm
MOQ : 2 NOS
- Forward voltage, VF: 1.4V
- Forward Current, IF: 50mA
- Current - DC Forward (If) (Max):100mA
- Wavelength:850nm ~ 940nm
- High radiant intensity
- Peak wavelength =940nm
- 54mm Lead spacing
- High reliability.
- Low forward voltage
- Energy efficient.
- Environmentally friendly.
- Zero maintenance.
- Long life (50000 hrs to 100000 hrs).
IR Receiver 3 Leg Black Small
- Sensing distance: 45m
- P.F frequency: 38.0 kHz
- Supply voltage: 2.5V- 5.5V
- Mounting type: through hole
- Operating temperature: -25°C ~ 85°C (TA)
- Directivity: 45°
- Supply Current: 350µA
- High-Level Pulse Width: 0.8 ms
- Low-Level Pulse Width: 0.8 ms
- Power Dissipation: 10 mW
- Proper Shielding Against EMI
- High Immunity against Ambient Light
- Photo Detector and Preamplifier in single Package
- Low Supply Current
- Insensitive to Noise and Supply Voltage Ripple
IR Receiver Black 3mm
- Spectral range (nm):700-1050
- Light Current IL ≥3mA
- Dark current ID< 0.1uA
- Breakdown Voltage> 30
- Maximum forward current 25mA
- Power dissipation Pd(mw): 100
- Package: Through-hole
- Diameter: 3mm
- Maximum reverse voltage 5V
- Maximum Forward Voltage 2 V-1.3V
- Operating Temperature(Celsius) -40°C- +100°C
- Fast Response
- High photosensitivity
- High reliability
PIR Sensor
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Colour: White + Green OR White + Blue
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Voltage Output: High/Low level Signal: 3.3V TTL output
- Delay Time: 5 to 200s (Can be Adjusted, Default 5s +/- 3%)
- Blockade time: 2.5s (Default)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
- Dimension: 3.2cm x 2.4cm x 1.8cm
Smart RC Line Tracker Following Robot Car Tracking kit
- Automatic Line Patrol Technology: By assembling the car, it can automatically follow the line.
- DIY Toy: The car can virtually improve children's hands-on ability and thinking ability when assembling it.
- Learning Basic Knowledge of Electronics: Products contain multiple components, which can let children know basic electronic components and cultivate their interest in programming toys.
- Suitable for people over 5 years old.
- Material: PCB + Electronic Components.
- Product Size: 10 x 10 x 5cm.
- Product Weight: 30g.
- Package Dimensions: 15 x 10 x 10cm.
Reviews
There are no reviews yet.