I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Light Head Magnifying Glass
₹1,300.00 Original price was: ₹1,300.00.₹1,200.00Current price is: ₹1,200.00. inc. GST
- The product is a wide-view magnifying glass with a light head and a 3D lens.
- The headband is adjustable to fit most head sizes.
- Magnifier: 1.2X-520620mm; 1.8X-230320mm; 2.5X-150250mm; 3.5X-80120mm
- Equipped with a single strong LED light to enlighten the viewing field
- Battery power: 2 x 1.5V AAA batteries (not included)
Light travels at different speeds through different substances. It goes slightly slower through glass and plastic than it does through air.
A magnifying glass is usually made of glass or plastic and has a convex lens (one that bulges outwards). When light strikes the glass at an angle, it is refracted towards the lens’s center. Leaving the glass causes it to refract, even more, implying that these streams of light will eventually converge. These are unique in that they have two lens slots and one fixed front round lens (8X). The two back lens slots can hold one or two lenses at a time.
Since all of the lenses on the headlamp can be folded when not in use, you can utilise any one of them or any combination of the three (1 fixed lens and 2 replace). It also consists of a soft, breathable sponge-padded headband with two rotational knobs on the left and right that revolve anticlockwise to remove the entire lighting frame from the headband, making it more comfortable to wear. This magnifying working lamp, which comes in a variety of magnifications, aids in the improvement of low vision and allows for good sight even when stitching.
Applications:
- Outdoor activities, residential use, and electronic industry processing, installation, and repair;
- Examining pores, manicures, and so on.
- Sculpture and visual arts
- Camera, watch, and other repair accessories
- Reading in low-light conditions
- Dentists, tailors, and embroiderers
- Stamp collecting, jewelry making, printing, drawing, reading, stitching, and so on.

Related products
150mm 6 inch LCD Digital Electronic Vernier Caliper
- Measuring range: 0–100 mm.
- Resolution: 0.1mm.
- Repeatability: 0.1mm.
- Accuracy: + 0.1 mm.
- Maximum measurement speed: 1m/s.
- Power: 1 x 1.5V SR44 (silver oxide cell) battery
- Material: Carbon Fiber
- Internal, external and height dimensions can be easily and accurately measured.
- Zero setting in any position.
- With easy to read large LCD display.
- Handy conversion chart at the back.
- Ideal tool for a broad range of industrial and automotive applications.
- Dimension: 240 x 80 x 12mm
3 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degrees C
- Holes for Mounting: 3 mm
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 13*30*9mm
- Weight: 3gm
6pcs Hss Titanium Mane Drill Tap Combination Bit – 1/4 Hex Spiral Screw Tap
- Type: Center Drill Bit
- DIY Supplies: Woodworking
- Material: High Speed Steel
- Use: Wood Drilling,
- Shank: 1/4" (6.35mm) hex shank
- Size: 3.175mm, 3.97mm, 4.76mm, 6.35mm, 7.94mm, 9.53mm.
- Complete Hole Drilling
- Tapping And Deburring/Countersinking In One Operation With Power Drill
- Saves labour cost and time
Digital LCD Ampere Voltage Meter Ammeter Voltmeter AC 80 300V 100A
- Material: ABS
- Colour: White
- Voltage Measurement Range: AC 80-300V
- Current Measurement Range: AC 0-100.0A
- Power supply: < 0.2V*A
- Installation: Embedded installation
- Accuracy: 1% ± 2digit
- Measurement speed: about 2 times per second
- Display Type: LCD with blue backlight
- Operating Temperature: 10deg. C ~65deg. C
- Operating Humidity: 35~85 per cent RH
- Current Transformer: included
- Widely used in substation automation, distribution automation, test equipment, voltage     regulator and so on
- Dimension: Approx. 7x4.1x3.2cm
HSS Steel Step Cone Drill Titanium Bit Set Hole Cutter Triangular Shank
- Material: high-speed steel
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- Self-starting point starts on contact
- Titanium reduces heat for longer life
- Anti-skid tip eliminates the need for center punching or pilot hole drilling.
- Applicable scope: woodworking punch
- specification: 3/16 1/2 Size: 3/16 1/2 (3/11/5/13/7/11/2) 1/8 1/2 Size: (1/5/37/31/9/35/111/33/13/37/115/31/2mm) 1/4 3/4 Size: (1/5/13/7/11/9/15/11/13/4)
Mini Electric Drill Chuck 0.3-4mm Jto Taper-Mounted Lathe PCB Drill Press
- High precision screw thread and tapered hole.
- Strong impact resistance.
- Compatible with impact drill and different power electric drill.
- jt0 taper the biggest end of diameter: 6. 350mm
- jt0 taper the smallest end of diameter: 5. 800mm
- Outer diameter: 21. 5mm
- Drill Clip aperture: 6mm
- Taper type outside diameter drill chuck: 21mm
- Clamping range: 0. 3mm-4mm drill,
- Maximum clamping: 4.2mm
- Fit motor shaft diameter 3. 17mm
- Connection size: jt0 (inner hole diameter is 6 mm) for milling machine, lathe, drilling machine, woodworking machine
Soldering Iron Stand
Triangular Shank HSS Step Cone Drill Titanium Bit Hole Cutter 1 or 4 1 3 or 8 Inch
- Material: High-Speed Steel Hss Steel.
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- The self-starting point starts on contact
- Titanium reduces heat for longer life
- Anti-skid tip eliminates the need for centre punching or pilot hole drilling.
- Deburring, chamfering, elliptic hole enlargement, twist drill, the function of them was unable, but it is possible
- Applicable scope: woodworking punch
- Size: 1/4 1 3/8 (1/3/1/5/3/7/1 1/1 1/1 3/8)

Reviews
There are no reviews yet.