I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-17%Sold out
Raspberry PI 5MP V1.3 Camera Module
Original price was: ₹900.00.₹750.00Current price is: ₹750.00. inc. GST
LM 2576HV Buck Module
Original price was: ₹250.00.₹199.00Current price is: ₹199.00. inc. GST
LM2577 Boost power module
Original price was: ₹600.00.₹500.00Current price is: ₹500.00. inc. GST
- Input voltage range : 3-34V DC
- Output voltage range : 4-35v DC adjustable
- Output current:3A
- Voltmeter range:0 to 40V,error +-0.1v
- Multiple output regulator.
- One button to switch input and output voltage display.
- Power-down memory function.
- Press the button for 3 seconds can turn OFF/ON the LED display.
- Multiple output regulator.
- When adjusting the blue potentiometer, please use a multimeter to monitor the voltage
- Rotating Clockwise can raise the voltage while rotating counter clockwise could lower the voltage
Out of stock
Description
The LM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module is a 150 kHz fixed frequency PWM buck (step-down) DC/DC module. Â LM2577 3A DC-DC steps up the input voltage from 3V ~ 34V to any high output voltage from 4V ~ 35V at a continuous current of 3A depending on the input-output voltage settings. Since it is a boost convertor the output voltage will be always higher than the input voltage. This DC to DC boost converter provides excellent line and load regulation, as it is capable of driving a 3A load current. Under the condition when the output current exceeds 2A, a heat sink provided to avoid thermal damages.
This step-up power module booster is a low-cost module with over current and current limiting features. A built-in 3A efficient MOSFET switches enable to achieve an efficiency of up to 92%. Thus LM2577 offers better results and a low ripple factor. This step-up switching current (BOOST) module allows the use of small-capacity filter components compared with low frequency switching regulators. Thus module allows to reduce the overall board size to be smaller and thus helps for space-saving. An on-board Red LED present in the module illuminates when power applied.
The module comes with a multi-turn pot for adjustment of the output voltage. Turning the pot CW increases the output voltage while turning it CCW decreases the output voltage. This boost converter Ideal for battery-operated projects requiring a regulated power supply. It has an Adjustable Power Supply Step-up Module, maximum input current 3A, the highest conversion efficiency 92%.
Reviews (0)
Shipping & Delivery
Related products
2 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degree C
- Holes for Mounting: 3 mm
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 13*30*9mm
- Weight: 3gm
5V USB OUTPUT CONVERTOR 7V-24V TO 5V/3A, DC-DC STEP DOWN BUCK KIS3R33S MODULE
- Module nature: non isolated buck
- Input voltage: 7V-24V DC
- Output voltage: 5V DC
- Output current: 4A
- Conversion efficiency:96% (max)
- Switching frequency: 340KHz
- Output ripple:30mv (max)
- Load regulation: +/-0.5%
- Voltage regulation: +/-2.5%
- Operating temperature: -40 degree to +85 degree Celsius
- Rectification: nonsynchronous rectification
- Short circuit protection
- Dimensions:60*21*14mm
- Weight: 150gm
7815 15V Positive Voltage Regulator IC
- Output Voltage:Â 15V
- Line Regulation (max):Â 300mV
- Load Regulation (max): 300mV
- Dropout Voltage:Â 2V
- Output Resistance:19mΩ
- Output current in excess of 1A
- Â Internal thermal overload protection
- Â No external components required
- Â Output transistor safe area protection
- Â Internal short circuit current limit
- Available in the aluminum TO-3 package
- Thermal Overload Protection
- Short Circuit Protection
- Output Transistor Safe Operating Area Protection
AMS1117 3.3V POWER SUPPLY MODULE
• Input: DC 4.5V – 12V (input voltage must be more than the output voltage (more than 1V))
• Output: 3.3V, 800mA (load current cannot exceed 800mA)
• Onboard AMS1117 chip.
• Onboard power indicator to indicate power is turned on: Red LED.
• Output voltage interface, connection to facilitate the experimental.
• Specially designed two pin mounting holes, can be directly fixed on the whole expansion board for experiments.
• Small Compact Size, 4Pin Type, Breadboard Friendly.
• 2P single row pin input and output for easy connection
• Dual-panel design, the layout is nice
DC-DC BOOST CONVERTER STEP UP I/P: 10V – 32V O/P: 12V -35V/6A
- Input voltage: 10V-32V DC
- Output voltage: 12V-35V DC
- Output Current: 6A
- Output ripple: 2% MAX
- Output power: 150 W
- Working temperature: -40 degree to 85 degree
- No load current:25mA
- Voltage regulation:+-0.5%
- Load regulation:+-0.5%
- Dynamic response speed: 200uS 5%
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Easy to drive 65W 90W dual-core notebook.
- The output voltage is continuously adjustable on OUT+ and OUT- screw terminals
- Dimension:2 .60*1.85*1.1inch
Reviews
There are no reviews yet.