I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-20%
Back to products
6A SPDT ON ON Rocker Switch
Original price was: ₹25.00.₹15.00Current price is: ₹15.00. inc. GST
LM350K 3A Adjustable Voltage Regulator IC
Original price was: ₹125.00.₹100.00Current price is: ₹100.00. inc. GST
- Three-terminal 3 A adjustable voltage regulator
- Input-output voltage differential 35 V
- Operating junction temperature range 0 to 1250C
- 3 A output current
- Adjustable output down to 1.2 V
- Line regulation typically 0.005 %/V
- Load regulation typically 0.1 %
- Package : TO-3
- Line Regulation 3V ≤ (VIN − VOUT) ≤ 35V(2)
- Operating Temperature Range LM350A −40°C ≤ TJ ≤ +125°C, LM350 0°C ≤ TJ ≤ +125°C
- Lead Temperature Plastic Package (Soldering, 4 sec.) 260°C
- Reference Voltage 3V ≤ (VIN − VOUT) ≤ 35V, 10 mA ≤ IOUT ≤ 3A, P ≤ 30W
- Current Limit VIN − VOUT = 30V
- Ripple Rejection Ratio VOUT = 10V, f = 120 Hz, CADJ = 10 μF
Description
LM350K 3A Adjustable Voltage Regulator designed as the LM150 series of adjustable 3-terminal positive voltage regulators. It is capable of supplying a current more than 3A over a 1.2V to 33V output range. These are quite easy to use and needs only 2 external resistors to line the output voltage. Moreover, both line and load regulation are similar to discrete designs.LM350K 3A Adjustable transformer IC manufactured in standard transistor packages which are easily mounted and handled.
LM350K IC designed as a very rugged voltage transformer IC featuring thermal regulation, short circuit protection etc. This circuit designed as per the application notes in the datasheet and found as working very fine. Moreover, these circuit has improved ripple rejection and better stability compared to the elementary voltage regulator using an equivalent IC. The output voltage adjusted via POT R2. By adjusting R2 the output voltage often varied between 1.2V and 25V. When the output shorted, the diode D2 discharges capacitor C2. It is a 3A voltage regulator IC for DC adjustable power supply(1.25V to 35V), high-performance, with a couple of components.
In addition to higher performance than fixed regulators, the LM350K offers full overload protection available only in IC’s. Moreover, the IC chip designed with onboard current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal accidentally disconnected. An output capacitor are often added to enhance transient response, while bypassing the adjustment (LM350A) pin will increase the regulator’s ripple rejection.
​​APPLICATIONS:
- Adjustable Power supplies
- Constant Current Regulators
- Battery Chargers
Reviews (0)
Shipping & Delivery
Related products
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Reviews
There are no reviews yet.