I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-20%
Back to products
6A SPDT ON ON Rocker Switch
Original price was: ₹25.00.₹15.00Current price is: ₹15.00. inc. GST
LM350K 3A Adjustable Voltage Regulator IC
Original price was: ₹125.00.₹100.00Current price is: ₹100.00. inc. GST
- Three-terminal 3 A adjustable voltage regulator
- Input-output voltage differential 35 V
- Operating junction temperature range 0 to 1250C
- 3 A output current
- Adjustable output down to 1.2 V
- Line regulation typically 0.005 %/V
- Load regulation typically 0.1 %
- Package : TO-3
- Line Regulation 3V ≤ (VIN − VOUT) ≤ 35V(2)
- Operating Temperature Range LM350A −40°C ≤ TJ ≤ +125°C, LM350 0°C ≤ TJ ≤ +125°C
- Lead Temperature Plastic Package (Soldering, 4 sec.) 260°C
- Reference Voltage 3V ≤ (VIN − VOUT) ≤ 35V, 10 mA ≤ IOUT ≤ 3A, P ≤ 30W
- Current Limit VIN − VOUT = 30V
- Ripple Rejection Ratio VOUT = 10V, f = 120 Hz, CADJ = 10 μF
Description
LM350K 3A Adjustable Voltage Regulator designed as the LM150 series of adjustable 3-terminal positive voltage regulators. It is capable of supplying a current more than 3A over a 1.2V to 33V output range. These are quite easy to use and needs only 2 external resistors to line the output voltage. Moreover, both line and load regulation are similar to discrete designs.LM350K 3A Adjustable transformer IC manufactured in standard transistor packages which are easily mounted and handled.
LM350K IC designed as a very rugged voltage transformer IC featuring thermal regulation, short circuit protection etc. This circuit designed as per the application notes in the datasheet and found as working very fine. Moreover, these circuit has improved ripple rejection and better stability compared to the elementary voltage regulator using an equivalent IC. The output voltage adjusted via POT R2. By adjusting R2 the output voltage often varied between 1.2V and 25V. When the output shorted, the diode D2 discharges capacitor C2. It is a 3A voltage regulator IC for DC adjustable power supply(1.25V to 35V), high-performance, with a couple of components.
In addition to higher performance than fixed regulators, the LM350K offers full overload protection available only in IC’s. Moreover, the IC chip designed with onboard current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal accidentally disconnected. An output capacitor are often added to enhance transient response, while bypassing the adjustment (LM350A) pin will increase the regulator’s ripple rejection.
​​APPLICATIONS:
- Adjustable Power supplies
- Constant Current Regulators
- Battery Chargers
Reviews (0)
Shipping & Delivery
Related products
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.