I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Mh13001 220V Digital Air Humidity Control Controller Range 1% – 99%
₹1,700.00 Original price was: ₹1,700.00.₹1,600.00Current price is: ₹1,600.00. inc. GST
- Model Name: MH 13001
- Voltage: 220 Volt
- Accuracy: +-3% RH
- Type: Digital
- Color: Black
- Display Type: LCD
- Input Sensor: Humidity Sensor
- Humidity: 1% ~ 99% RH\humidity measuring
- Error: ±3 percent rh
- Control range: 1 percent RH
- Power consumption:3w
- Output load: Ac 10a/220v
- Working temperature: 0°c – 80 °c
- Dimensions: 8 x 5 x 3cms
- Usage/Application: Air Humidity Controller Hygrostat Humidistat Humidification Dehumidification
Mh13001 220V Digital Air Humidity Control Controller Mh13001 220V Digital Humidity Control Controller Mh13001 220V Digital Humidity Control Controller Mh13001 220V Digital Humidity It includes a humidity controller sensor probe with cable, as well as a wide humidity measuring and regulating range. This humidity Capacitive Digital Temperature and Humidity Module is a composite temperature and humidity sensor that outputs a calibrated digital signal. An LCD is used to show the digital output. The red display has three “LED” digits that clearly indicate the complete temperature number (no decimal place).
Humidity sensors employ a high-precision capacitive faster chip that has the benefit of high reflectivity accuracy. It features a humidity measurement range of 1% to 99 percent RH, as well as a humidity control range of 1% RH. The parameters for the power outage permanent memory function have been specified in this module via the menu for humidification and dehumidification.
The Mh13001 220V Digital Air Humidity Control Controller is more precise, more accurate, and operates across a wider temperature/humidity range. However, as compared to AM2302, it is significantly larger and more costly. The use of specific digital module acquisition technology as well as temperature and humidity sensors ensures exceptional dependability and long-term stability of the products.
The humidity controller is controlled by four buttons below the display. The first button denotes “SET,” while the next two buttons + and – are used for menu navigation, raising or lowering settings, and Rst is similar to a “ON/OFF button.” Three green terminals are located on the rear of the humidity controller. “Relay switch” is on the left, “Power” is in the middle, and terminals for probe AM2302 are on the right. In addition, the Humidity controller sensor MH-13001 is located on the right side of the temperature controller at the bottom. It also has an active end that is roughly 80 cm long.

Related products
10000W Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature
- Operating Voltage: AC 220 VDC
- Maximum Power: 10000W
- Voltage Range: AC 0-220V (adjust temperature or light)
- Controller Size: 95.7*56.7*53.8mm
- Panel Size: 74.6*59.8*2.3mm
- Cable Length: 287mm
- New two-way high-power SCR, max current up to 80A.
- Voltage regulator with the peak voltage absorption circuit effectively protects the high-power SCR and has a longer service life.
- Built-in heat sink, thickened to increase the heat sink, good heat dissipation, easy to install.
- 57A high current terminal block, simple wiring, strong button adjustment stability.
- Omron original tact switch, Fairchild original photoelectric coupler, all metal film resistors are stable and durable.
- The value is automatically saved. After power-on, it will automatically start to the last adjusted value.
- Weight: 200gm
5000W Thyristor Voltage Regulator, Adjust Light Speed Temperature
Fan Wifi Controller
MH1210W 72V 250V 10A Digital Temperature Controller
- Working voltage: DC 9-72V/AC90-250V ± 10%, 50/60 HZ
- Rated current: 10 A
- Power consumption: ≤3 W
- Measurement range: -50~110 °C
- Measurement precision: 0.1 °C
- Measurement error: ±0.3 °C
- A mini temperature controller.
- Large and clear LED display for better readability
- Wide temperature measuring range
- Heating and cooling control
- Temperature calibration
- Delay protection function
- All parameters reset to default settings after short circuit
Motor Controller 24V for MY1016 350W
Rotary Encoder Controller With Switch
STC-1000 220V AC All Purpose Digital Temperature Controller Module
- Power supply: 220VAC±10%, 50/60Hz.
- Sensor Type: NTC Sensor
- Resolution: 0.1°C.
- Accuracy: ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power consumption: ≤3W.
- Front panel size : 75 x 34.5mm
- Mounting size: 71x 29mm.
- Sensor length: 1m (include the probe).
- Temperature Measuring Range: -50 to 90°C
- Storage temperature : -30 - 75°C;
- Relative humidity : 20% - 85%
- Output Relay Capacity : Heating: 10A/220VAC; Cooling: 10A/220VAC
- Mini temperature controller.
- With a clear LED display for better readability.
- Dual heating and cooling control.
- Automatic over-temperature alarm
- Relay output.
- Dimension: 75x 34.5x 85mm
UC3843A Current Mode Controller IC
- High Performance Current Mode Controller
- Bias and Drive Voltages: 30V
- Total Power Supply and Zener Current: 30mA
- Output Current: 1A
- Reference Output Voltage: 5V
- Line Regulation Max: 20mV
- Load Regulation Max: 25mV
- Frequency: 52KHz
- Low Level Output Voltage: 0.1V
- High Level Output Voltage: 13.5V
- Startup Threshold Max: 9V
- Package: DIP-8

Reviews
There are no reviews yet.