I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Mh13001 220V Digital Air Humidity Control Controller Range 1% – 99%
₹1,700.00 Original price was: ₹1,700.00.₹1,600.00Current price is: ₹1,600.00. inc. GST
- Model Name: MH 13001
- Voltage: 220 Volt
- Accuracy: +-3% RH
- Type: Digital
- Color: Black
- Display Type: LCD
- Input Sensor: Humidity Sensor
- Humidity: 1% ~ 99% RH\humidity measuring
- Error: ±3 percent rh
- Control range: 1 percent RH
- Power consumption:3w
- Output load: Ac 10a/220v
- Working temperature: 0°c – 80 °c
- Dimensions: 8 x 5 x 3cms
- Usage/Application: Air Humidity Controller Hygrostat Humidistat Humidification Dehumidification
Mh13001 220V Digital Air Humidity Control Controller Mh13001 220V Digital Humidity Control Controller Mh13001 220V Digital Humidity Control Controller Mh13001 220V Digital Humidity It includes a humidity controller sensor probe with cable, as well as a wide humidity measuring and regulating range. This humidity Capacitive Digital Temperature and Humidity Module is a composite temperature and humidity sensor that outputs a calibrated digital signal. An LCD is used to show the digital output. The red display has three “LED” digits that clearly indicate the complete temperature number (no decimal place).
Humidity sensors employ a high-precision capacitive faster chip that has the benefit of high reflectivity accuracy. It features a humidity measurement range of 1% to 99 percent RH, as well as a humidity control range of 1% RH. The parameters for the power outage permanent memory function have been specified in this module via the menu for humidification and dehumidification.
The Mh13001 220V Digital Air Humidity Control Controller is more precise, more accurate, and operates across a wider temperature/humidity range. However, as compared to AM2302, it is significantly larger and more costly. The use of specific digital module acquisition technology as well as temperature and humidity sensors ensures exceptional dependability and long-term stability of the products.
The humidity controller is controlled by four buttons below the display. The first button denotes “SET,” while the next two buttons + and – are used for menu navigation, raising or lowering settings, and Rst is similar to a “ON/OFF button.” Three green terminals are located on the rear of the humidity controller. “Relay switch” is on the left, “Power” is in the middle, and terminals for probe AM2302 are on the right. In addition, the Humidity controller sensor MH-13001 is located on the right side of the temperature controller at the bottom. It also has an active end that is roughly 80 cm long.

Related products
2000W SCR VOLTAGE REGULATOR
4 Pin Digital LCD Wood Moisture Meter Timber Damp Detector Tester 5% 40%
- Model:MD-4G
- Display: LCD Display
- Range:5%~40%
- Resolution:1%
- Single probe length:10mm
- Color: Gray
- Material: Plastic
- Power Supply:1 x 9V Battery (Not included)
- Measure moisture content of wood, bamboo, paper etc.
- Stable performance and quick response, the meter is really reliable.
- With data hold function and low battery indication
- Dimension: 123 x 65 x 23mm
- Weight: 78g
5000W Super Power Thyristor Electronic Voltage Regulator, Adjust Light Speed Temperature
- Operating Voltage: AC 220 VDC
- Maximum Power: 10000W
- Voltage Range: AC 0-220V (adjust temperature or light)
- Controller Size: 95.7*56.7*53.8mm
- Panel Size: 74.6*59.8*2.3mm
- Cable Length: 287mm
- New two-way high-power SCR, max current up to 80A.
- Voltage regulator with the peak voltage absorption circuit effectively protects the high-power SCR and has a longer service life.
- Built-in heat sink, thickened to increase the heat sink, good heat dissipation, easy to install.
- 57A high current terminal block, simple wiring, strong button adjustment stability.
- Omron original tact switch, Fairchild original photoelectric coupler, all metal film resistors are stable and durable.
- The value is automatically saved. After power-on, it will automatically start to the last adjusted value.
- Weight: 200gm
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
- Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
- Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
- Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
- Quiescent current: 20mA
- Operating current: 50mA
- Service life: more than 100,000 times
- Working temperature: -40°C-85°C
- With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
- Dimension: 6.2 * 3.8 * 1.7cm
Fan Wifi Controller
PWM 10A DC MOTOR SPEED CONTROL
- Working voltage:12V to 40V DC
- Maximum output power: 400 watt
- Current:10A, 100watt
- Static current:0.02A
- PWM duty cycle:10% - 100%
- PWM frequency:13KHz
- With reverse polarity protection, high current protection
- High efficiency and torque
- Control voltage over-voltage protection
- Low heat generation
- Material used: metal
- Dimensions:6*5.6*3cm
- SIZE: 64gm
Rotary Encoder Controller With Switch
XH-W1401 12V Digital Led Thermostat Module Temperature Controller With Display
- Model: XH-W1401
- Power Supply: DC12V
- Thermostat Range: -9℃ to 99℃
- Thermostat Accuracy: 1℃
- Output : Electric relay output ,capacity 220V 10A/12V 10A
- For cooling or heating temperature control
- Simple Temperature Sensor Module with 12V Relay
- Imported High-Speed single-chip microcomputer.
- Three Display output status indicator.
- Automatically judge heating and cooling according to set temperature.
- Used in various temperature control, water temperature control, incubators, etc.
- Refresh Rate: 0.5 Sec
- Dimension:” 78*55mm
- Weight: 0.040 kg

Reviews
There are no reviews yet.